X-Pump S9 Patient Medical Equipment Syringe Pump
X-S99病人医疗设备注射泵
| 型号。 | X泵S9 |
| 证明 | ce，iso13485 |
| 医疗器械监管类型 | 类型2 |
| 状态指示器 | 停止，运行，bolus，Kvo |
| 注射器类型 | 5,10,20,30,50 M1 |
| 准确性 | +/-3% |
| 重量 | 约1.8公斤 |
| 电源 | 100 - 240 vac，0.25-0.11a，50 / 60hz |
| 运输包装 | 纸箱 |
| 起源 | 中国深圳 |
| 类型 | 注射泵 |
| 组 | 所有患者 |
| 显示屏 | 3.5英寸b / w液晶显示器 |
| 电池类型 | 锂聚合物电池（7.4V） |
| 累积注射量 | 0.1 - 999.9 Ml |
| 增量 | 0.1毫升/ H |
| 防水等级 | IP23 |
| 商标 | BMV |
| 规范 | 310 mm（L）* 125 mm（D）* 115 mm（H） |
| HS编码 | 9018310000 |
X-Pump S9注射泵
专为新生儿，儿科和成人患者设计ICU和OR。
产品特点
药物库与所有最常用的药物
历史记录审查和最后配置内存
操作时更改流量
手动推注和自动推注
反推动系统减少明显推迟闭塞后突然释放
微量流量0.1ml / h，体重模式满足新生儿要求
带输液监控系统的无线数据传输（可选）
规格表
专为新生儿，儿科和成人患者设计ICU和OR。
产品特点
药物库与所有最常用的药物
历史记录审查和最后配置内存
操作时更改流量
手动推注和自动推注
反推动系统减少明显推迟闭塞后突然释放
微量流量0.1ml / h，体重模式满足新生儿要求
带输液监控系统的无线数据传输（可选）
规格表
| 适用注射器 | 所有品牌的标准注射器：5ml，10ml，20ml，30ml，50ml |
| 准确性 | ±3％lusmn; 3％lusmn;3% |
| 注射增量 | 0.1毫升 |
| 遮挡值 | 为40kPa〜160kPa |
| 注射率 | 5ml：0.1ml / h〜100ml / h; 10ml：0.1ml / h〜200ml / h 20ml：0.1ml / h〜400ml / h; 30ml：0.1ml / h〜600ml / h; 50ml：0.1ml / h〜1500ml / h |
| 累积注射量 | 0.1毫升〜9999.9毫升 |
| 操作方式 | 可选：速率模式，时间模式，体重模式 |
| 时间模式 | 体积限制：0.1〜999.9ml时间：1〜2000分钟 |
| 体重模式 | 药物限量：0.1〜999.9mg 溶液限量：0.1〜999.9ml 重量：01〜300.0kg 剂量：0.1〜9999.9 mg / kg / h，ug / kg / min |
| 显示信息 | 速率，体积限制，累积注射量，注射器尺寸，压力值，电池容量，医疗剂量单位，床号，交流电源指示器，电池充电指示剂，药物名称，推注率 |
| 报警功能 | OVER，NEAR，闭塞，低电量，注射器分离，无交流电源，电池严重不足 |
| KVO率 | 0.1ml / h〜5.0ml / h（可选） |
| 螺栓率 | 5ml：100ml / h; 10ml：200ml / h; 20ml：400ml / h; 30ml：400ml / h〜600ml / h; 50ml：400ml / h〜1500ml / h |
| 重量 | 1.8公斤 |
| 尺寸 | 310 X 125 X 115mm |
| 电源 保险丝 | ac100〜220v，50 / 60hz t2al250av |
| 最大功耗 | 25W，充电后可以运行4h |
| 电池 | 可充电锂聚合物电池，7.4V，1600mAh |
| 电池充电 | 当泵连接到交流电源时，打开电源 电池将自动充电（约8〜14小时充满电） |
| 电气安全 | 符合IEC60601-1：1996的规定 |
| 电磁兼容 | 符合IEC60601-1-2：2006的规定 |
| 壳材料 | ABS塑料 |
| 分类 | ii class-bf |
| 运行条件 | 环境温度：5°C〜40°C〜40°Ceg;C~40°C 空气压力：80kPa〜106kPa 相对湿度≤80％80％ 80% |
| 储存条件 | 环境温度：-20°C〜50°C〜50°Ceg;C~50°C 空气压力：50kPa〜106kPa 相对湿度≤95％95％ 95% |
| Model NO. | X-Pump S9 |
| Certification | CE, ISO13485 |
| Medical Device Regulatory Type | Type 2 |
| Status Indicator | Stop, Run, Bolus, Kvo |
| Syringe Type | 5, 10, 20, 30, 50 Ml |
| Accuracy | +/-3% |
| Weight | Approximately 1.8 Kg |
| Power Supply | 100 - 240 VAC, 0.25-0.11A, 50/60 Hz |
| Transport Package | Carton Box |
| Origin | Shenzhen, China |
| Type | Syringe Pump |
| Group | All Patient |
| Display Screen | 3.5 Inch B/W LCD |
| Battery Type | Lithium Polymer Battery(7.4V) |
| Accumulated Injection Volume | 0.1 - 999.9 Ml |
| Increment | 0.1ml/H |
| Waterproof Level | IP23 |
| Trademark | BMV |
| Specification | 310 mm(L) * 125 mm(D) *115 mm(H) |
| HS Code | 9018310000 |
X-Pump S9 Syringe Pump
designed for neonatal, pediatric and adult patients in the ICU and OR.
Product Features
Drug library with all the most used drugs
History record review and last configuration memory
Change the flow rate while operating
Manual bolus and automatic bolus
Anti-bolus system to reduce significantly bolus after occlusion sudden release
Micro flow rate of 0.1ml/h and Body weight mode to satisfy the requirement for Neonatal
Wireless data transmission with infusion supervision system (optional)
Specification list
designed for neonatal, pediatric and adult patients in the ICU and OR.
Product Features
Drug library with all the most used drugs
History record review and last configuration memory
Change the flow rate while operating
Manual bolus and automatic bolus
Anti-bolus system to reduce significantly bolus after occlusion sudden release
Micro flow rate of 0.1ml/h and Body weight mode to satisfy the requirement for Neonatal
Wireless data transmission with infusion supervision system (optional)
Specification list
| Applicable syringes | All brands of standard syringes: 5ml,10ml,20ml,30ml,50ml |
| Accuracy | ±3%lusmn;3%lusmn;3% |
| Injection increment | 0.1ml |
| Occlusion value | 40kPa~160kPa |
| Injection rate | 5ml: 0.1 ml/h~100ml/h; 10ml: 0.1 ml/h~200ml/h 20ml: 0.1 ml/h~400ml/h; 30ml: 0.1 ml/h~600ml/h; 50ml: 0.1 ml/h~1500ml/h |
| Accumulated injection volume | 0.1ml~9999.9ml |
| Modes of operation | Selectable: rate mode, time mode, body weight mode |
| Time mode | Volume limit: 0.1~999.9ml Time: 1~2000 minutes |
| Body weight mode | Drug limit:0.1~999.9mg Solution limit:0.1~999.9ml Weight: 01~300.0kg Dose: 0.1~9999.9 mg/kg/h, ug/kg/min |
| Displayed information | Rate, volume limit, accumulated injection volume, syringe size, pressure value, battery capacity, unit of medical dosage, bed No., AC power indicator, battery charge indicator, drug name, bolus rate |
| Alarm function | OVER, NEAR, Occlusion, Low battery, Syringe disengaged, No AC power supply, serious low battery |
| KVO rate | 0.1ml/h~5.0ml/h (selectable) |
| Bolus rate | 5ml: 100ml/h; 10ml: 200ml/h; 20ml: 400ml/h; 30ml: 400ml/h~600ml/h; 50ml: 400ml/h~1500ml/h |
| Weight | 1.8kg |
| Dimension | 310 X 125 X 115mm |
| Power supply Fuse | AC100~220V, 50/60Hz T2AL250AV |
| Maximum power consumption | 25W, can run for 4h after being recharged |
| Battery | Rechargeable lithium polymer battery, 7.4V, 1600mAh |
| Battery recharge | When the pump is connected to the AC power supply, turn on the power and the battery will automatically recharge (about 8~14 hours to recharge fully) |
| Electrical safety | Comply with the stipulation of IEC60601-1: 1996 |
| Electromagnetic compatibility | Comply with the stipulation of IEC60601-1-2: 2006 |
| Shell material | ABS plastic |
| Classification | II Class-BF |
| Operating conditions | Environment temperature: 5°C~40°C~40°Ceg;C~40°C air pressure: 80kPa~106kPa relative humidity ≤ 80% 80% 80% |
| Storage conditions | Environment temperature: -20°C~50°C~50°Ceg;C~50°C air pressure: 50kPa~106kPa relative humidity ≤ 95% 95% 95% |
