Electrical Nursing Bed Units for Treatment (MSLNB04)
电子护理床（MSLNB04）
购买电疗护理床（MSLNB04）
电动护理床设计用于治疗，诊断和治疗。
特征
床的两端由ABS材料制成并可拆卸。
2.主体采用喷涂优质碳钢制成。
配备中央控制cφ125mm astor，稳定;为了减少与地面的摩擦，容易移动。
4.桌面使用冷轧钢板。
5.采用优质电动缸，外观漂亮，省电，噪音低，防水，使用寿命长。
主要结构
产品由机构和电控系统组成。
护理床架，腿架的旋转和运动，电动床的升降由电机驱动到各种可调位置，如果需要，可以根据您的选择进行调整。
技术参数
供应：220V±10％，50Hz
长度... 2150mm
宽度... 900mm
最小高度... 450mm
最大高度... 640mm
调整... 190mm
翻转Trendelenburg ...≥5°
Trendelenburg ...≥12°
后部从水平方向升起...≥45°
腿部从水平方向升起...≥30°
脚部从水平方向升起...≥120°
安全负载... 1700N
重量... 160Kg
安装步骤
安装床头，床端
四个固定轴必须紧紧旋转到床架，然后将床架和尾床架插入其中。
运输和储存条件
A）环境温度：-40摄氏度〜+ 55摄氏度
B）相对湿度：≤80％
C）大气压：50kPa〜106.0kPa
移动环境条件：
A）环境温度：5摄氏度〜40摄氏度
B）相对湿度：≤70％
C）大气压：70.0kPa〜106.0kPa
D）电源电压：AC220V±22V，50Hz±1Hz。
该装置应在室内储存，相对湿度小于80％，无腐蚀性空气，通风良好。无侧倾。
它可以定期运输，没有碰撞，振荡，雨或阳光直射。
电动护理床设计用于治疗，诊断和治疗。
特征
床的两端由ABS材料制成并可拆卸。
2.主体采用喷涂优质碳钢制成。
配备中央控制cφ125mm astor，稳定;为了减少与地面的摩擦，容易移动。
4.桌面使用冷轧钢板。
5.采用优质电动缸，外观漂亮，省电，噪音低，防水，使用寿命长。
主要结构
产品由机构和电控系统组成。
护理床架，腿架的旋转和运动，电动床的升降由电机驱动到各种可调位置，如果需要，可以根据您的选择进行调整。
技术参数
供应：220V±10％，50Hz
长度... 2150mm
宽度... 900mm
最小高度... 450mm
最大高度... 640mm
调整... 190mm
翻转Trendelenburg ...≥5°
Trendelenburg ...≥12°
后部从水平方向升起...≥45°
腿部从水平方向升起...≥30°
脚部从水平方向升起...≥120°
安全负载... 1700N
重量... 160Kg
安装步骤
安装床头，床端
四个固定轴必须紧紧旋转到床架，然后将床架和尾床架插入其中。
运输和储存条件
A）环境温度：-40摄氏度〜+ 55摄氏度
B）相对湿度：≤80％
C）大气压：50kPa〜106.0kPa
移动环境条件：
A）环境温度：5摄氏度〜40摄氏度
B）相对湿度：≤70％
C）大气压：70.0kPa〜106.0kPa
D）电源电压：AC220V±22V，50Hz±1Hz。
该装置应在室内储存，相对湿度小于80％，无腐蚀性空气，通风良好。无侧倾。
它可以定期运输，没有碰撞，振荡，雨或阳光直射。
Buy electrical nursing bed units for treatment (MSLNB04)
Electrical Nursing Bed is designed for healing, diagnosis and treatment.
Features
1. Both ends of beds are made of ABS materials and detachable.
2. The main body is made of sprayed high-quality carbon steel.
3. Equipped with central-controlled cφ 125mm astors, stable; To reduce friction with ground, easy to move.
4. Cold-rolled steel plate is used in the tabletop.
5. It used high-quality electric-vat, look nice, save electricity, lower noise, waterproof, long life-span.
Main Structure
The product is composed of the mechanism and the electric control system.
The rotation and movement of back-care bed frame, legs frame and it'raising and lowing of electric nursing bed are driven to the various adjustable positions by motor, if necessary, can be adjusted at your choice.
Technology parameter
Supply: 220V± 10%, 50Hz
Length...2150mm
Width...900mm
Min Height...450mm
Max Height...640mm
Adjust...190mm
Reversed Trendelenburg...≥ 5°
Trendelenburg...≥ 12°
Back Section Raised from the horizontal...≥ 45°
Leg Section Raised from the horizontal...≥ 30°
Foot Section Raised from the horizontal...≥ 120°
Security Load...1700N
Weight...160Kg
Install Step
Install bed head, bed end
Four fixed-axis must be rotated to the bed frame tightly, then insert Head bed rack and Tail bed rack into them.
Transportation and stockpile conditions
A) Environmental temperature: -40centigrade~+55centigrade
B) Relative humidity: ≤ 80%
C) Atmospheric pressure: 50kPa~106.0kPa
Moving Environmental conditions:
A) Environmental temperature: 5centigrade~40centigrade
B) Relative humidity: ≤ 70%
C) Atmospheric pressure: 70.0kPa~106.0kPa
D) Supply voltage: AC220V± 22V, 50Hz± 1Hz.
This device in package should be stored indoor with a relative humidity less than 80%, no erosive air and good ventilation is required. No side-sloping.
It can be shipped in regular transportation without crash, oscillation, rain or direct sunlight.
Electrical Nursing Bed is designed for healing, diagnosis and treatment.
Features
1. Both ends of beds are made of ABS materials and detachable.
2. The main body is made of sprayed high-quality carbon steel.
3. Equipped with central-controlled cφ 125mm astors, stable; To reduce friction with ground, easy to move.
4. Cold-rolled steel plate is used in the tabletop.
5. It used high-quality electric-vat, look nice, save electricity, lower noise, waterproof, long life-span.
Main Structure
The product is composed of the mechanism and the electric control system.
The rotation and movement of back-care bed frame, legs frame and it'raising and lowing of electric nursing bed are driven to the various adjustable positions by motor, if necessary, can be adjusted at your choice.
Technology parameter
Supply: 220V± 10%, 50Hz
Length...2150mm
Width...900mm
Min Height...450mm
Max Height...640mm
Adjust...190mm
Reversed Trendelenburg...≥ 5°
Trendelenburg...≥ 12°
Back Section Raised from the horizontal...≥ 45°
Leg Section Raised from the horizontal...≥ 30°
Foot Section Raised from the horizontal...≥ 120°
Security Load...1700N
Weight...160Kg
Install Step
Install bed head, bed end
Four fixed-axis must be rotated to the bed frame tightly, then insert Head bed rack and Tail bed rack into them.
Transportation and stockpile conditions
A) Environmental temperature: -40centigrade~+55centigrade
B) Relative humidity: ≤ 80%
C) Atmospheric pressure: 50kPa~106.0kPa
Moving Environmental conditions:
A) Environmental temperature: 5centigrade~40centigrade
B) Relative humidity: ≤ 70%
C) Atmospheric pressure: 70.0kPa~106.0kPa
D) Supply voltage: AC220V± 22V, 50Hz± 1Hz.
This device in package should be stored indoor with a relative humidity less than 80%, no erosive air and good ventilation is required. No side-sloping.
It can be shipped in regular transportation without crash, oscillation, rain or direct sunlight.
