Head-Controlled Operating Table (MSLMO11)
头控制操作台（MSLMO11）
多用途工作台制造商和供应商 - MSLMO11
主要用途和结构
本产品用于临床操作使用。桌子是单桌板。表的所有位置完全从头端控制。台面的提升系统是液压动力，姿势的调整依靠气动弹簧。根据手动操作，产品可以满足临床操作中姿势的要求。
特征
它是一种适合所有外科手术和检查的多用途手术台。
2.使用结合了燃油泵，储气罐和驱动系统的踏板液压泵。
3.桌面的运动由气动弹簧控制，操作方便，方向可靠。
4.合理结构和时尚造型
5.因为Kidney Bridge在里面，所以操作桌子很方便。
6.外部金属由防腐不锈钢制成。
7.床垫由耐酸性和耐碱性材料组成。
结构原理
该台利用气动弹簧作为工作元件来控制台板的运动。当气缸阀打开时，气缸的顶部和气缸的底部连接，然后可以调节活塞位置。当活塞被调整到所需的位置时，关闭气缸阀门，并分离气缸的两个部分，然后，由于气缸中的气压，活塞的位置被固定。
桌面的上升和下降运动均由油泵控制。
主要能力参数
台面：总长1990mm，宽480mm
桌面高度的适应范围：
最小。高度≤700mm，最大。高度≥940mm，上升距离≥240mm。
头枕的住宿范围：
向上≥35°向下≥40°可分离。
背部的适应范围：
向上≥70°向下≥10°
腿部的适应范围：
向上≥75°可分离。
桌面的反转Trendelenburg和Trendelenburg系列：
扭转Trendelenburg≥15°Trendelenburg≥15°
桌面横向倾斜范围：
左倾斜≥10°右倾斜≥10°。
肾桥上升距离：≥80mm
桌面额定负载重量：135
基座可以移动或锁定
注意
1.使用表后，应保持平面并处于最低位置，以保护色谱柱的正常使用。
2.肾组织桥应保持在最低的位置，在组装折叠以保护腰部面板之前。
3.在左右手术，逆行手术的情况下，患者的手势应该由身体支撑者固定并绑定以防止患者滑动。
4.固定在桌子上的所有附件，滑块，手臂支撑和身体支撑应确保在轨道上的固定。用于固定头颅板和背板的按钮应固定。
5.手臂支撑者应避免额外的压力和太重的物体。
6.操作肾桥时，在提升或下降到最大位置时不要摇动，以保护肾桥。
7.操作台不是电子产品，因此在生产时，我们不考虑部件之间的防断裂性。因此，使用时请注意。
8.包装中的手术台处于“停止”状态，因此您无法向前推。如果你想移动桌子，请践踏左脚踏板，让桌子处于“移动”状态。
9.为了保护脚踏杆，在移动脚杆时禁止将脚杆作为手柄。
主要用途和结构
本产品用于临床操作使用。桌子是单桌板。表的所有位置完全从头端控制。台面的提升系统是液压动力，姿势的调整依靠气动弹簧。根据手动操作，产品可以满足临床操作中姿势的要求。
特征
它是一种适合所有外科手术和检查的多用途手术台。
2.使用结合了燃油泵，储气罐和驱动系统的踏板液压泵。
3.桌面的运动由气动弹簧控制，操作方便，方向可靠。
4.合理结构和时尚造型
5.因为Kidney Bridge在里面，所以操作桌子很方便。
6.外部金属由防腐不锈钢制成。
7.床垫由耐酸性和耐碱性材料组成。
结构原理
该台利用气动弹簧作为工作元件来控制台板的运动。当气缸阀打开时，气缸的顶部和气缸的底部连接，然后可以调节活塞位置。当活塞被调整到所需的位置时，关闭气缸阀门，并分离气缸的两个部分，然后，由于气缸中的气压，活塞的位置被固定。
桌面的上升和下降运动均由油泵控制。
主要能力参数
台面：总长1990mm，宽480mm
桌面高度的适应范围：
最小。高度≤700mm，最大。高度≥940mm，上升距离≥240mm。
头枕的住宿范围：
向上≥35°向下≥40°可分离。
背部的适应范围：
向上≥70°向下≥10°
腿部的适应范围：
向上≥75°可分离。
桌面的反转Trendelenburg和Trendelenburg系列：
扭转Trendelenburg≥15°Trendelenburg≥15°
桌面横向倾斜范围：
左倾斜≥10°右倾斜≥10°。
肾桥上升距离：≥80mm
桌面额定负载重量：135
基座可以移动或锁定
注意
1.使用表后，应保持平面并处于最低位置，以保护色谱柱的正常使用。
2.肾组织桥应保持在最低的位置，在组装折叠以保护腰部面板之前。
3.在左右手术，逆行手术的情况下，患者的手势应该由身体支撑者固定并绑定以防止患者滑动。
4.固定在桌子上的所有附件，滑块，手臂支撑和身体支撑应确保在轨道上的固定。用于固定头颅板和背板的按钮应固定。
5.手臂支撑者应避免额外的压力和太重的物体。
6.操作肾桥时，在提升或下降到最大位置时不要摇动，以保护肾桥。
7.操作台不是电子产品，因此在生产时，我们不考虑部件之间的防断裂性。因此，使用时请注意。
8.包装中的手术台处于“停止”状态，因此您无法向前推。如果你想移动桌子，请践踏左脚踏板，让桌子处于“移动”状态。
9.为了保护脚踏杆，在移动脚杆时禁止将脚杆作为手柄。
Multipurpose Operating Table Manufacturer and Supplier - MSLMO11
Main Usage & Structure
This product is for clinical operating use. The table is single table-board. All positions of the table are controlled entirely from the head-end. The lift system of the table is hydraulic powered, and the adjustment of the posture relies on pneumatic spring. Depending on manual operation, the product can meet the requirement of posture in clinical operation.
Features
1. It is a multipurpose operating table that fits to all surgical operation and inspection.
2. Utilize pedal hydraulic pump which combines the fuel pump, gas tank, and the driving system.
3. The movement of the table-top is controlled by pneumatic spring, easy to operate and reliable to orientation.
4. Reasonable Structure & Fashionable Molding
5. As Kidney Bridge is inside, it's convenient to operate the table.
6. External metal consists of corrosion-proof stainless steel.
7. Mattress consists of both acid resistance and alkali resistance materials.
Structural Principle
1. The table utilizes pneumatic spring as working element to control the movement of the table-board. When the cylinder valve is opened, the top part of the cylinder and the bottom part of the cylinder are connected, and then the piston position can be adjusted. When the piston is adjusted to the position as required, close the cylinder valve, and separate the two parts of the cylinder, then, owe to the air pressure in the cylinder, the position of the piston is fixed.
2. Both the ascending and descending movements of the table top are controlled by the oil pump.
Main Capability Parameter
Table Top: Overall length 1990mm, Width 480mm
Range of accommodation of the height of table-top:
Min. Height≤ 700mm, Max. Height≥ 940mm, rising distance≥ 240mm.
Range of accommodation of Head Rest:
Upward≥ 35° Downward≥ 40° Detachable.
Range of accommodation of back section:
Upward≥ 70° Downward≥ 10°
Range of accommodation of leg section:
Upward≥ 75° Detachable.
Reversed Trendelenburg and Trendelenburg range of table-top:
Reversed Trendelenburg≥ 15° Trendelenburg≥ 15°
Lateral Tilt range of table-top:
Left tilt ≥ 10° Right tilt≥ 10° .
Rising distance of Kidney Bridge: ≥ 80mm
Rated load weight of the table-board: 135
Pedestal could be moved or locked
Attentions
1. After using the table, you should leave it plane and at a lowest position, in order to protect the normal use of the column.
2. The kidney bridge should be kept on the lowest position, before assemble of the folding back to protect the waist panel.
3. Before the operation of the left-right, reversed trendelenburg and trendelenburg of the table, the gesture of the patient should be fixed by the body supporter and binding to prevent the slipping of the patient.
4. All the accessories fixed on the table, the slider, arm supporter and body supporter should be assured of the fixation on the track. The buttons used for fixing the cephalic plate and backboard should be fixed.
5. The arm supporter should avoid the extra pressure and too heavy objects.
6. When operating kidney bridge, do not shake it while lifting or descending to an utmost position, in order to protect it.
7. The operating table is not electronic product, so while producing, we don't put the breakover resistance between the parts into our consideration. Thus, please pay attention to it while using.
8. The operating table in package is on 'stopping' state, so you cannot push it forward. If you want move the table, please trample the left footplate to let the table on 'moving' state.
9. In order to protect the foot lever, it is forbidden to take the foot lever as handle while moving it.
Main Usage & Structure
This product is for clinical operating use. The table is single table-board. All positions of the table are controlled entirely from the head-end. The lift system of the table is hydraulic powered, and the adjustment of the posture relies on pneumatic spring. Depending on manual operation, the product can meet the requirement of posture in clinical operation.
Features
1. It is a multipurpose operating table that fits to all surgical operation and inspection.
2. Utilize pedal hydraulic pump which combines the fuel pump, gas tank, and the driving system.
3. The movement of the table-top is controlled by pneumatic spring, easy to operate and reliable to orientation.
4. Reasonable Structure & Fashionable Molding
5. As Kidney Bridge is inside, it's convenient to operate the table.
6. External metal consists of corrosion-proof stainless steel.
7. Mattress consists of both acid resistance and alkali resistance materials.
Structural Principle
1. The table utilizes pneumatic spring as working element to control the movement of the table-board. When the cylinder valve is opened, the top part of the cylinder and the bottom part of the cylinder are connected, and then the piston position can be adjusted. When the piston is adjusted to the position as required, close the cylinder valve, and separate the two parts of the cylinder, then, owe to the air pressure in the cylinder, the position of the piston is fixed.
2. Both the ascending and descending movements of the table top are controlled by the oil pump.
Main Capability Parameter
Table Top: Overall length 1990mm, Width 480mm
Range of accommodation of the height of table-top:
Min. Height≤ 700mm, Max. Height≥ 940mm, rising distance≥ 240mm.
Range of accommodation of Head Rest:
Upward≥ 35° Downward≥ 40° Detachable.
Range of accommodation of back section:
Upward≥ 70° Downward≥ 10°
Range of accommodation of leg section:
Upward≥ 75° Detachable.
Reversed Trendelenburg and Trendelenburg range of table-top:
Reversed Trendelenburg≥ 15° Trendelenburg≥ 15°
Lateral Tilt range of table-top:
Left tilt ≥ 10° Right tilt≥ 10° .
Rising distance of Kidney Bridge: ≥ 80mm
Rated load weight of the table-board: 135
Pedestal could be moved or locked
Attentions
1. After using the table, you should leave it plane and at a lowest position, in order to protect the normal use of the column.
2. The kidney bridge should be kept on the lowest position, before assemble of the folding back to protect the waist panel.
3. Before the operation of the left-right, reversed trendelenburg and trendelenburg of the table, the gesture of the patient should be fixed by the body supporter and binding to prevent the slipping of the patient.
4. All the accessories fixed on the table, the slider, arm supporter and body supporter should be assured of the fixation on the track. The buttons used for fixing the cephalic plate and backboard should be fixed.
5. The arm supporter should avoid the extra pressure and too heavy objects.
6. When operating kidney bridge, do not shake it while lifting or descending to an utmost position, in order to protect it.
7. The operating table is not electronic product, so while producing, we don't put the breakover resistance between the parts into our consideration. Thus, please pay attention to it while using.
8. The operating table in package is on 'stopping' state, so you cannot push it forward. If you want move the table, please trample the left footplate to let the table on 'moving' state.
9. In order to protect the foot lever, it is forbidden to take the foot lever as handle while moving it.
