Electric Nursing Bed for Sale (MSLNB01)
电动护理床（MSLNB01）
电子护理床最佳价格MSLNB01
1，使用
电动护理床设计用于治疗，诊断和治疗。
2，主要特点：
床的两端由ABS材料制成并可拆卸。
B.主体采用喷涂优质碳钢制成。
C.配有中央控制φ125mm脚轮，稳定;为了减少与地面的摩擦，容易移动。
D.桌面使用冷轧钢板。
E.采用高品质电动缸，外观漂亮，省电，噪音低，防水，使用寿命长。
3，主要结构
产品由机构和电控系统组成。
护理床架，腿架的旋转和运动以及电动床的升降通过电机驱动到各种可调位置，如果需要，可以根据您的选择进行调节。
4，技术参数：
供应：AC 220V±10％，50Hz
长度... 2050mm
宽度... 900mm
最小高度：430mm
最大高度... 680mm
调整... 190mm
背部从水平方向升起...≥60°
腿部从水平方向升起...≥30°
安全负载... 1750N
设备安全分类I B
5，安装步骤
安装床头，床端。
四个固定轴必须紧紧旋转到床架，然后将床架和尾床架插入其中。
6，电动床的说明：
A.当四个脚轮自由时，床可以移动。当脚轮制动时，床是固定的。
B.为方便患者在床上，向上拉护栏，向下翻转180°，然后将护栏放在一边。相反，护栏可以竖立起来。
C.背部和腿部折叠上下，床面的上升和下降运动都是电动操作的。当必要的按钮被按下时，相应的电机将工作，当按钮不是按钮时，所有运动停止。
注意事项：
1，在使用床之前，请将所有手柄锁紧。
2，保持按钮容器干燥，清洁，避免电流泄漏。
3，保持床清洁，看起来不错。
4，必须定期修理和保持清洁，每年一次。
5，在无人值守的情况下，床垫支撑台应放置在水平位置
6，移动床，请将电线挂在电线挂钩上，避免滚压电线，这可能导致电线断裂或电线绝缘损坏，影响操作。
7，本产品可电动操作6个动作。这些运动必须单独操作。注意：本产品由单相交流（220V，50Hz）三相插座供电。保险丝插头额定值为2A。请仔细检查插座以确保可靠的接地;在停止执行时关闭电源。
8，床的使用寿命为7年。如果在过期期间使用，可能是LED对一些机械部件的磨损和腐蚀，并且对机械强度具有负面影响。患者可能受伤。所以床应该在定期维护和安全使用期间使用。
9，患者必须处于正常的精神状态，体重不得超过135公斤。
10，更换部件在床正常使用期间，已确认报废（无法使用），应按分类处理（可回收和不可回收）。
11，电动床配合使用高频手术设备，可能会发生电磁干扰，因此，当使用两者时，应避免直接在床上操作。
1，使用
电动护理床设计用于治疗，诊断和治疗。
2，主要特点：
床的两端由ABS材料制成并可拆卸。
B.主体采用喷涂优质碳钢制成。
C.配有中央控制φ125mm脚轮，稳定;为了减少与地面的摩擦，容易移动。
D.桌面使用冷轧钢板。
E.采用高品质电动缸，外观漂亮，省电，噪音低，防水，使用寿命长。
3，主要结构
产品由机构和电控系统组成。
护理床架，腿架的旋转和运动以及电动床的升降通过电机驱动到各种可调位置，如果需要，可以根据您的选择进行调节。
4，技术参数：
供应：AC 220V±10％，50Hz
长度... 2050mm
宽度... 900mm
最小高度：430mm
最大高度... 680mm
调整... 190mm
背部从水平方向升起...≥60°
腿部从水平方向升起...≥30°
安全负载... 1750N
设备安全分类I B
5，安装步骤
安装床头，床端。
四个固定轴必须紧紧旋转到床架，然后将床架和尾床架插入其中。
6，电动床的说明：
A.当四个脚轮自由时，床可以移动。当脚轮制动时，床是固定的。
B.为方便患者在床上，向上拉护栏，向下翻转180°，然后将护栏放在一边。相反，护栏可以竖立起来。
C.背部和腿部折叠上下，床面的上升和下降运动都是电动操作的。当必要的按钮被按下时，相应的电机将工作，当按钮不是按钮时，所有运动停止。
注意事项：
1，在使用床之前，请将所有手柄锁紧。
2，保持按钮容器干燥，清洁，避免电流泄漏。
3，保持床清洁，看起来不错。
4，必须定期修理和保持清洁，每年一次。
5，在无人值守的情况下，床垫支撑台应放置在水平位置
6，移动床，请将电线挂在电线挂钩上，避免滚压电线，这可能导致电线断裂或电线绝缘损坏，影响操作。
7，本产品可电动操作6个动作。这些运动必须单独操作。注意：本产品由单相交流（220V，50Hz）三相插座供电。保险丝插头额定值为2A。请仔细检查插座以确保可靠的接地;在停止执行时关闭电源。
8，床的使用寿命为7年。如果在过期期间使用，可能是LED对一些机械部件的磨损和腐蚀，并且对机械强度具有负面影响。患者可能受伤。所以床应该在定期维护和安全使用期间使用。
9，患者必须处于正常的精神状态，体重不得超过135公斤。
10，更换部件在床正常使用期间，已确认报废（无法使用），应按分类处理（可回收和不可回收）。
11，电动床配合使用高频手术设备，可能会发生电磁干扰，因此，当使用两者时，应避免直接在床上操作。
Electrical Nursing Bed for best price MSLNB01
1, Use
Electrical Nursing Bed is designed for healing, diagnosis and treatment.
2, Main characteristic:
A. Both ends of beds are made of ABS materials and detachable.
B. The main body is made of sprayed high-quality carbon steel.
C. Equipped with central-controlled φ 125mm castors, stable; To reduce friction with ground, easy to move.
D. Cold-rolled steel plate is used in the tabletop.
E. It used high-quality electric-vat, look nice, save electricity, lower noise, waterproof, long life-span.
3, Main Structure
The product is composed of the mechanism and the electric control system.
The rotation and movement of back-care bed frame, legs frame and its raising and lowing of electric nursing bed are driven to the various adjustable positions by motor, if necessary, can be adjusted at your choice.
4, Technical Parameters:
Supply: AC 220V± 10%, 50Hz
Length...2050mm
Width...900mm
Min Height...430mm
Max Height...680mm
Adjust...190mm
Back Section Raised from the horizontal...≥ 60°
Leg Section Raised from the horizontal...≥ 30°
Security Load...1750N
Device safety sort I B
5, Install Step
Install bed head, bed end.
Four fixed-axis must be rotated to the bed frame tightly, then insert Head bed rack and Tail bed rack into them.
6, Instruction of Electric Nursing Bed:
A. When four foot-wheels is free, then bed can be moved. When foot-wheels be braked, the bed is fixed.
B. To facilitate patients on the bed, pulling upward the guardrail, flip down 180 ° , then put aside the guardrail. On the contrary, the guardrail can be erected.
C. Back section and leg section Fold up and down, ascending and descending movements of the bed top are all electrically operated. When the necessary button is rushed, the corresponding motor will work, when the button is not puessde, all movements stop.
Cautions:
1, Before using the bed, lock all handles tightly.
2, Keep the button container dry and clean to avoid current leakage.
3, Keep the bed clean and look nice.
4, It must be repaired and kept clean regularly, once every year.
5, In unattended circumstances, the mattress supporting table should be placed in the horizontal position
6, Move bed, please put wires hanging on the wires hook to avoid roller pressing the wires, which can result in the wire fracture or wire insulation damage, affecting manipulation.
7, The product can electrically operate 6 movements. These movements must be operated separately. Attention: The product is supplied by single-phase alternating current (220V, 50Hz), tri-socket. Fuse plug rating is 2A. Please carefully inspect socket to insure reliable earth; Shut off power while stop perform.
8, The service life for the bed is seven years. If it is used in expired period, it maybe LED to wearing and corrosion of some mechanical parts, and had a negative influence upon the mechanical intensity. The patients maybe suffered. So the bed should be used in the regular maintenance and during safety using period.
9, Patients must be in the normal state of mind, body weight must not exceed 135 kg.
10, The replacement parts during the bed' normal using period, has been confirmed scrapped (unable to use), should be handled according to the classification (recyclable and non-recovery).
11, Electric care beds coupled with the use of high-frequency surgical equipment, it is possible that electromagnetic interference happens, therefore, it should avoid operating directly to the bed when using both.
1, Use
Electrical Nursing Bed is designed for healing, diagnosis and treatment.
2, Main characteristic:
A. Both ends of beds are made of ABS materials and detachable.
B. The main body is made of sprayed high-quality carbon steel.
C. Equipped with central-controlled φ 125mm castors, stable; To reduce friction with ground, easy to move.
D. Cold-rolled steel plate is used in the tabletop.
E. It used high-quality electric-vat, look nice, save electricity, lower noise, waterproof, long life-span.
3, Main Structure
The product is composed of the mechanism and the electric control system.
The rotation and movement of back-care bed frame, legs frame and its raising and lowing of electric nursing bed are driven to the various adjustable positions by motor, if necessary, can be adjusted at your choice.
4, Technical Parameters:
Supply: AC 220V± 10%, 50Hz
Length...2050mm
Width...900mm
Min Height...430mm
Max Height...680mm
Adjust...190mm
Back Section Raised from the horizontal...≥ 60°
Leg Section Raised from the horizontal...≥ 30°
Security Load...1750N
Device safety sort I B
5, Install Step
Install bed head, bed end.
Four fixed-axis must be rotated to the bed frame tightly, then insert Head bed rack and Tail bed rack into them.
6, Instruction of Electric Nursing Bed:
A. When four foot-wheels is free, then bed can be moved. When foot-wheels be braked, the bed is fixed.
B. To facilitate patients on the bed, pulling upward the guardrail, flip down 180 ° , then put aside the guardrail. On the contrary, the guardrail can be erected.
C. Back section and leg section Fold up and down, ascending and descending movements of the bed top are all electrically operated. When the necessary button is rushed, the corresponding motor will work, when the button is not puessde, all movements stop.
Cautions:
1, Before using the bed, lock all handles tightly.
2, Keep the button container dry and clean to avoid current leakage.
3, Keep the bed clean and look nice.
4, It must be repaired and kept clean regularly, once every year.
5, In unattended circumstances, the mattress supporting table should be placed in the horizontal position
6, Move bed, please put wires hanging on the wires hook to avoid roller pressing the wires, which can result in the wire fracture or wire insulation damage, affecting manipulation.
7, The product can electrically operate 6 movements. These movements must be operated separately. Attention: The product is supplied by single-phase alternating current (220V, 50Hz), tri-socket. Fuse plug rating is 2A. Please carefully inspect socket to insure reliable earth; Shut off power while stop perform.
8, The service life for the bed is seven years. If it is used in expired period, it maybe LED to wearing and corrosion of some mechanical parts, and had a negative influence upon the mechanical intensity. The patients maybe suffered. So the bed should be used in the regular maintenance and during safety using period.
9, Patients must be in the normal state of mind, body weight must not exceed 135 kg.
10, The replacement parts during the bed' normal using period, has been confirmed scrapped (unable to use), should be handled according to the classification (recyclable and non-recovery).
11, Electric care beds coupled with the use of high-frequency surgical equipment, it is possible that electromagnetic interference happens, therefore, it should avoid operating directly to the bed when using both.
