Horizontal Type Steam Pressure Autoclave Sterilizer (THR-YDA)
卧式蒸汽灭菌器（THR-YDA）
议价
加入意向| 型号。 | THR-YDA |
| 类型 | 压力蒸汽灭菌设备 |
| 工作准备 | 0.22mpa |
| 可调温度 | 40-134°4°eg;4° |
| 灭菌时间 | 0-60分钟 |
| 材料 | 不锈钢 |
| 工厂位置 | 距上海两小时 |
| 规范 | 90Lφ440×700mm次; 700毫米imes; 700mm |
| 理论 | 压力蒸汽 |
| 卷 | 90l，150l，200l，280l，400l，500l |
| 工作温度 | 134°4°eg;4° |
| 干燥时间 | 0-60分钟 |
| OEM | 可得到 |
| 保证 | 一年 |
| 商标 | THR |
| 起源 | 中国 |
卧式蒸汽压力高压灭菌器（THR-YDA）
特点：
灭菌过程自动灭菌控制，操作方便。
2.具有干燥功能，适合敷料干燥。
3.具有过温，过压自动保护装置。
4.在室内的压力降至0.027MPa之前，门打开机构不能操作。如果门不能很好地关闭，就不能开始。
当内压超过0.24MPa，蒸汽排放到水箱时，安全值将自动打开。
6.自动切断电源，切断水源，当机器缺水时报警。
灭菌器的室由不锈钢制成。
特点：
灭菌过程自动灭菌控制，操作方便。
2.具有干燥功能，适合敷料干燥。
3.具有过温，过压自动保护装置。
4.在室内的压力降至0.027MPa之前，门打开机构不能操作。如果门不能很好地关闭，就不能开始。
当内压超过0.24MPa，蒸汽排放到水箱时，安全值将自动打开。
6.自动切断电源，切断水源，当机器缺水时报警。
灭菌器的室由不锈钢制成。
| Model NO. | THR-YDA |
| Type | Pressure Steam Sterilization Equipments |
| Working Preaaure | 0.22mpa |
| Adjustable Temperature | 40-134°4°eg;4° |
| Time of Sterilization | 0-60 Mins |
| Material | Stainless Steel |
| Factory Location | Two-Hour Away From Shanghai |
| Specification | 90L φ 440 × 700mmtimes; 700mmimes; 700mm |
| Theory | Pressure Steam |
| Volume | 90L, 150L, 200L, 280L, 400L, 500L |
| Working Temperature | 134°4°eg;4° |
| Time of Drying | 0-60 Mins |
| OEM | Available |
| Warranty | One Year |
| Trademark | THR |
| Origin | China |
Horizontal Type Steam Pressure Autoclave Sterilizer(THR-YDA)
Characteristics:
1. Sterilizing course automatic sterilization controlled, easy to operate.
2. With drying function, suitable dressing drying.
3. With over-temperature, over-pressure auto-protect device.
4. The door opening mechanism cannot be operated until the pressure in the chamber is reduced to 0.027MPa. It can't be start on if the door doesn't close well.
5. The safety value will be open automatically when the inner pressure over 0.24MPa, and the steam be exhausting to the water tank.
6. The power will be cut-off automatically, cut-off the water and alarm when the machine lacking water.
7. The chamber of the sterilizer is made of stainless steel.
Characteristics:
1. Sterilizing course automatic sterilization controlled, easy to operate.
2. With drying function, suitable dressing drying.
3. With over-temperature, over-pressure auto-protect device.
4. The door opening mechanism cannot be operated until the pressure in the chamber is reduced to 0.027MPa. It can't be start on if the door doesn't close well.
5. The safety value will be open automatically when the inner pressure over 0.24MPa, and the steam be exhausting to the water tank.
6. The power will be cut-off automatically, cut-off the water and alarm when the machine lacking water.
7. The chamber of the sterilizer is made of stainless steel.
