Hsp-3 Medical Portable Syringe / Injection Pump
Hsp-3医疗便携式注射器/注射泵
| 型号。 | HSP-3 |
| 医疗器械监管类型 | 类型2 |
| 证书 | ce iso |
| 保证 | 12个月 |
| 相对湿度 | ≤80％RH80％的Rh0%Rh |
| 频率 | 50Hz的±1Hzlusmn; 1Hz的usmn;1Hz |
| 块压 | 40〜70kpa |
| 运输包装 | 纸板箱 |
| 起源 | 中国江苏 |
| 医疗器械注册/记录号 | Hsyjxz20122540591 |
| 电源 | ac220v±22v，50hz±1hz 50hz±1hzmn;1Hz 50Hz±1Hz |
| 输液流选择 | 0.1ml / H〜1600ml / H，原值为0.1ml / H |
| Orign的地方 | 中国 |
| 气压 | 860hpa〜1060hpa |
| 流量选项 | 0.1ml / H〜199.9ml / H，最小步骤0.1ml / H |
| 商标 | healicom |
| 规范 | ce iso |
| HS编码 | 8413190000 |
HSP-3注射泵
简介：采用微电脑新技术，结构紧凑，操作方便，HSP-3注射器具有多种预警功能，可以使用各种注射器。 HSP-3注射泵适用于普通药物，不适合痴呆，化疗药物等。
工作期限
| 温度 | -5ºC〜+ 40℃〜+ 40℃rdm;C~+40ºC |
| 相对湿度 | ≤80％RH0％RH0%RH |
| 电源 | AC220V±22V，50HZ±1hz50hz±1Hz的smn;1HZ50HZ±1HZ |
| 内置电池 | 12V±1.5V，电池充满电后可使用2小时。charged. |
| 气压 | 860hPa〜1060hPa |
| 储存条件 | 温度-40ºC〜55ºCCC〜55ºCrdm;CC~55ºC |
技术参数：
| 尺寸（mm） | 320（L）x145（W）X120（H） |
| 重量 | 约3KG |
| 消耗电力 | ≤10va10va10VA |
| 频率 | 50HZ±1hzusmn; 1Hz的usmn;1HZ |
| 可用注射器（一次）尺寸 | 10ml，20ml，30ml，50ml |
| 流量选项 | 0.1ml / h〜199.9ml / h，最小步长0.1ml / h |
| 输血量设定 | 0.1ml〜999.9ml，最小0.1ml |
| 阻塞压力 | 40〜70kPa |
| 流量误差 | ±5％（0.1毫升/h≤Flow≤50ml/小时）low≤50ml/ h）的/h)low≤50ml/h) |
| ±3％（50毫升/h≤Flow≤199.9ml/小时）≤199.9ml/ h）的/h)≤199.9ml/h) | |
| 报警 | 自检，闭塞，近端，完成，电力不足 功能：注射器型式试验，输液量指示，电源指示，报警音量选择，自动报警，KVO功能 |
HSP-3注射泵的优点
我们的注射泵可以通过校准使用所有品牌（默认设置为Terumo），注射器包括10ml，20ml，30ml，50ml。
2.自动识别注射器尺寸：10，20，30，50ml。
3.可用于调整报警音量（3级），待机报警延迟时间（1-9分钟），几乎完成报警间隔（0-3分钟）。
4.电源切换功能：当交流电源断开时，自动切换到电池电源并进行指示。交流电源连接后，自动切换到交流电源工作。
5.重复报警功能：如果报警真实原因在“SILENCE”按钮后2分钟内未解决，则会再次发出报警提醒以解决问题。
6.电池保护报警：为了保护电池和安全输液，电池电量将显示为从几乎完成到耗尽的声音和光线的不同级别。
7.当流量≥300ml/ h时，双重确认功能，更安全，避免误操作。ion.
8数据可以清除，更安全。
9.在输液过程中锁定控制面板，使其更安全。
10为避免误操作，按“POWER”3秒钟关闭泵。
11.可以单独设置流量，十位数字和数位数位，不需要从单个数字增加。
KVO（保持静脉打开）功能。完成设定输液量后，为防止形成血栓，以0.1ml / h的最低速度保持输液。
13. bolus（Quick Infuse）功能。
吹扫（疏散气泡）功能。
15.按'mL'，实时显示输入的音量。
明亮的大屏幕可以看出远远超过10米。ters.
17.充满电后，电池可连续使用5小时。
18.配有专用可调节距固定支架。它可以在45ºC角度或其他角度调节泵，以方便观察。ching.
注射泵中的芯片由SMT机器生产线自己加工而不是手工加工，每一点用手焊接。
20. CPU控制，功能稳定，可靠性高。
| Model NO. | HSP-3 |
| Medical Device Regulatory Type | Type 2 |
| Certificate | CE ISO |
| Warranty | 12 Months |
| Relative Humidity | ≤80%Rh80%Rh0%Rh |
| Frequency | 50Hz±1Hzlusmn;1Hzusmn;1Hz |
| Block Pressure | 40~70kpa |
| Transport Package | Carton |
| Origin | Jiangsu, China |
| Medical Devices Reg./Record No. | Hsyjxz20122540591 |
| Power Supply | AC220V±22V, 50Hz±1Hz 50Hz±1Hzmn;1Hz 50Hz±1Hz |
| Infusion Flow Selection | 0.1ml/H~1600ml/H, Original Value Is 0.1ml/H |
| Place of Orign | China |
| Atmospheric Pressure | 860hpa~1060hpa |
| Flow Rate Option | 0.1ml/H~199.9ml/H, Minimum Step 0.1ml/H |
| Trademark | healicom |
| Specification | CE ISO |
| HS Code | 8413190000 |
HSP-3 Syringe Pump
Introduction: Using new technology of microcomputer, compact structure and convenient operation, HSP-3 syringe have multi-warning functions and could use various injectors. HSP-3 syringe pump is suitable for generic medicament and unsuitable for stupefacient, anodyne,, chemotherapy medicine, etc.
Work Term
| Temperature | -5ºC~+40ºC~+40ºCrdm;C~+40ºC |
| Relative humidity | ≤80%RH0%RH0%RH |
| Power supply | AC220V±22V,50HZ±1HZ50HZ±1HZsmn;1HZ50HZ±1HZ |
| Built-in battery | 12V±1.5V,the battery can be used for 2 hours when fully charged.charged.charged. |
| Atmospheric pressure | 860hPa~1060hPa |
| Storage condition | temperature -40ºC~55ºCC~55ºCrdm;CC~55ºC |
Technique Parameter:
| Size (mm) | 320(L)x145(w)x120(H) |
| Weight | about 3KG |
| Consume power | ≤10VA10VA10VA |
| Frequency | 50HZ±1HZusmn;1HZusmn;1HZ |
| Usable injector (one-off) size | 10ml, 20ml, 30ml, 50ml |
| Flow rate option | 0.1ml/h~199.9ml/h, minimum step 0.1ml/h |
| Transfusion amount setting | 0.1ml~999.9ml,minimum step 0.1ml |
| Block pressure | 40~70kPa |
| Flow rate error | ±5%(0.1ml/h≤Flow≤50ml/h)low≤50ml/h)/h)low≤50ml/h) |
| ±3%(50ml/h≤Flow≤199.9ml/h)≤199.9ml/h)/h)≤199.9ml/h) | |
| Alarm | self-test, occlusion, near-end, completion, underpowered battery Function: injector type test, transfusion amount indication, power indication, alarm volume option, auto-alarm, KVO function |
HSP-3 Syringe Pump's Advantages
1. Our syringe pump could use all brands through calibration (default setting is Terumo), syringes including 10ml, 20ml, 30ml, 50ml.
2. Auto-recognize the syringe size: 10, 20, 30, 50ml.
3. Available for adjust alarm volume (3 levels), standby alarm delay time (1-9min), nearly finish alarm interval (0-3min).
4. Power Switching Function: When AC power is disconnected, automatically switch into battery power supply and give indication. When the AC power is connected, automatically switch into AC power working.
5. Repeat Alarm Function: If the alarm real reason is not be resolved within 2 minutes after press 'SILENCE' button, it will give alarm again to remind to resolve the problem.he problem.
6. Battery Protection Alarm: For protect battery and safety infusion, the battery power will be displayed as different levels in sound and light from nearly finish to exhausted.
7. Double confirmation function when flow rate≥300ml/h, make safer and avoid misoperation.ion.ion.
8 The data can be cleared, make safer.
9. Lock the control panel during infusion, make safer.
10 For avoid misoperation, press 'POWER' for 3 seconds to close the pump.e the pump.
11. Able to set flow rate by single digit, tens digit and hundreds digit separately, not need to increase from single digit.
12. KVO (Keep Vein Open) function. After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.1ml/h.
13. Bolus (Quick Infuse) function.
14. Purge (Evacuate Bubble) function.
15. Press 'mL', real-time display infused volume.sed volume.
16. The bright & large LED screen could be clear seen far from 10 meters.ters.ters.
17. The battery can be used continuously for 5 hours after full charged.
18. Equip with special adjustable-pitch fixed bracket. It could adjust the pump on 45ºC angle or other angle for easy watching.ching.ching.
19. The chip in syringe pump is be processed by ourselves on SMT machine production line instead of by manual work, as weld every point by hand.
20. CPU control, stable function, high reliability.
