Hsp-8A Medical Portable Syringe Pump
Hsp-8A医用便携式注射泵
| 型号。 | HSP-8A |
| 医疗器械监管类型 | 类型2 |
| 证书 | ce iso |
| 内置电池 | 直流12v 1800mah |
| 能量消耗 | ≤25Va25 Va5 Va |
| 商标 | Healicom |
| 规范 | ce，iso |
| HS编码 | 9018909090 |
| 医疗器械注册/记录号 | Hsyjxzz20132540393 |
| 保证 | 12个月 |
| 重量 | 2公斤 |
| 电池型号 | Jbt Ni-MH，充电 |
| 流量精度 | ±3％plusmn; 3％lusmn;3% |
| 运输包装 | 纸板箱 |
| 起源 | 中国江苏 |
基本参数：
| 尺寸（mm） | 266（L）×141（宽）×145（H）×145（H）145(H)×145(H) |
| 重量 | 2公斤 |
| 电源 | ac 100v〜ac 242v，50 / 60hz（±1hz）mn; 1hz）mn;1 HZ) |
| 内置电池 | 直流12v 1800mah |
| 电池型号 | JBT镍氢，可充电 |
| 电池连续使用时间 | 至少4小时（充满电的新电池，低于5ml / h运行） |
| 能量消耗 | ≤25va5 va5 VA |
| 输液流选择 | 0.1ml / h〜1600ml / h，原值为0.1ml / h |
| 螺栓率 | 注射器50ml：1600ml / h |
| 注射器30ml：900 ml / h | |
| 注射器20ml：600ml / h | |
| 注射器10ml：400ml / h | |
| 输液范围 | 0.1ml〜9999.9ml，原值0.1ml |
| 流量精度 | ±3％lusmn; 3％lusmn;3% |
| 闭塞压力 | 高：110kPa±20kPa（825mmHg±150mmHg）lusmn; 150mmHg）lusmn;150 mmHg) |
| 中间：80kPa±30kPa（600mmHg±225mmHg）加上225mmHg）plusmn;225mmHg) | |
| 低：60kPa±20kPa（450mmHg±150mmHg）lusmn; 150mmHg）lusmn;150 mmHg) | |
| 最大的输出压力 | < 975mmHg(130kPa)kPa) |
| 使用环境 | 温度：5ºC〜43ºCCC〜43ºCrdm;CC~43ºC |
| 相对湿度：≤90％RH（无冷凝状态）tus）tus) | |
| 大气压：860hPa〜1060hPa | |
| 存储环境 | 温度：-40ºC〜+55ºC〜+55ºCrdm;C~+55ºC |
| 相对湿度：≤90％RH（无冷凝状态）tus）tus) | |
| 大气压：860hPa〜1060hPa | |
| 防水等级 | IPX4 |
| 电击保护 | I类，CF型 |
| 报警 | 闭塞，几乎完成，完成，待机（无操作）电池电量不足，电池耗尽等 |
| 功能 | 输血量显示，流量显示，输液量显示 |
特殊功能
| KVO（保持静脉开放） | 完成设定输液量后，为防止形成血栓，以0.1ml / h的最低速度保持输液。 |
| 电源开关功能 | 当交流电源断开时，自动切换到电池电源并进行指示。交流电源连接后，自动切换到交流电源工作。 |
| 重复报警功能 | 如果报警真实原因在“SILENCE”按钮后2分钟内无法解决，则会再次提醒以提醒解决问题。 |
| 数据存储功能 | 能够保存最新设置的报警音量，品牌，遮挡压力。下一次使用的级别。能够保存五年。 |
| 电池保护报警 | 为了保护电池和安全输液，电池电量将显示为从几乎完成到耗尽的声音和光线的不同级别 |
| 移动报警 | 当试图移动或取出注射器时，会发出警报。 |
HSP-8A注射泵的优点
我们的注射泵可以通过校准使用所有品牌（默认设置为Terumo）。
2.自动识别注射器尺寸：10，20，30，50ml。
3.流量范围从0.1-1600ml / h。
4.可调节报警音量（3级），遮挡压力（3级）。
5.电源开关功能：当交流电源断开时，自动切换到电池电源并进行指示。交流电源连接后，自动切换到交流电源工作。
6.重复报警功能：如果报警真实原因在“SILENCE”按钮后1分钟内未解决，则会再次发出报警提醒以解决问题。
7.电池保护报警：为了保护电池和安全输液，电池电量将显示为从几乎完成到耗尽的声音和光线的不同级别。
8.当流量≥300ml/ h时，双重确认功能，更安全，避免误操作。ion.
数据可以被清除，更安全。
10.在输液过程中锁定控制面板，使安全。
11为避免误操作，请按“POWER”3秒钟关闭泵。
12.在面板中实际显示电池电量。
红色和黄色不同的报警灯显示不同的优先级别。
RS232口，能与电脑连接。
KVO（保持静脉打开）功能。完成设定输液量后，为防止形成血栓，以0.1ml / h的最低速度保持输液。
16. bolus（Quick Infuse）功能。
清除（疏散气泡）功能。
明亮的大屏幕液晶屏，看起来很容易 look
19.充满电后，电池可连续使用6小时。
20.注射泵中的芯片由我们自己在SMT机器生产线上处理，而不是通过手动加工，每一点用手焊接。
21. CPU控制，功能稳定，可靠性高。
| Model NO. | HSP-8A |
| Medical Device Regulatory Type | Type 2 |
| Certificate | Ce ISO |
| Built-in Batteries | DC 12V 1800mAh |
| Power Consumption | ≤25 Va25 Va5 Va |
| Trademark | Healicom |
| Specification | CE, ISO |
| HS Code | 9018909090 |
| Medical Devices Reg./Record No. | Hsyjxzz20132540393 |
| Warranty | 12months |
| Weight | 2kg |
| Battery Model | Jbt Ni-MH, Rechargeable |
| Flow Rate Precision | ±3%plusmn;3%lusmn;3% |
| Transport Package | Carton |
| Origin | Jiangsu, China |
Basic Parameter:
| Dimensions(mm) | 266(L)×141(W)×145(H)×145(H)145(H)×145(H) |
| Weight | 2Kg |
| Power supply | AC 100V~AC 242V,50/60HZ(±1 HZ)mn;1 HZ)mn;1 HZ) |
| Built-in batteries | DC 12V 1800mAh |
| Battery Model | JBT Ni-MH, rechargeable |
| Battery Continuous Use Time | At least 4hrs(Fully charged new battery, under 5ml/h running) |
| Power consumption | ≤25 VA5 VA5 VA |
| Infusion Flow Selection | 0.1ml/h~1600ml/h, original value is 0.1ml/h |
| Bolus rate | Syringe 50ml:1600ml/h |
| Syringe 30ml:900 ml/h | |
| Syringe 20ml:600 ml/h | |
| Syringe 10ml:400 ml/h | |
| Infusion Range | 0.1ml~9999.9ml, original value is 0.1ml |
| Flow Rate Precision | ±3%lusmn;3%lusmn;3% |
| Occlusion Pressure | High:110kPa±20kPa (825mmHg±150 mmHg)lusmn;150 mmHg)lusmn;150 mmHg) |
| Middle:80kPa±30kPa (600mmHg±225mmHg)plusmn;225mmHg)plusmn;225mmHg) | |
| Low:60kPa±20kPa (450mmHg±150 mmHg)lusmn;150 mmHg)lusmn;150 mmHg) | |
| The biggest output pressure | < 975mmHg(130kPa)kPa) |
| Use Environment | Temperature: 5ºC~43ºCC~43ºCrdm;CC~43ºC |
| Relative Humidity: ≤90%RH (Under without condensation status)tus)tus) | |
| Atmospheric Pressure: 860hPa~1060hPa | |
| Storage Environment | Temperature: -40ºC~+55ºC~+55ºCrdm;C~+55ºC |
| Relative Humidity: ≤90%RH (Under without condensation status)tus)tus) | |
| Atmospheric Pressure: 860hPa~1060hPa | |
| Waterproof Level | IPX4 |
| Electric Shock Protection | Class I, Type CF |
| Alarm | Occlusion, nearly finish, finish, standby (no operation) low battery, battery exhausted etc. |
| Function | Transfusion amount display, flow rate display, infused volume display |
Special Function
| KVO (Keep Vein Open) | After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.1ml/h. |
| Power Switching Function | When AC power is disconnected, automatically switch into battery power supply and give indication. When the AC power is connected, automatically switch into AC power working. |
| Repeat Alarm Function | If the alarm real reason is not be resolved within 2 minutes after press 'SILENCE' button, it will give alarm again to remind to resolve the problem.he problem. |
| Data Memory Function | Able to save the latest setting alarm volume level, brand, occlusion pressure. level for use next time. Able to save for five years. |
| Battery Protection Alarm | For protect battery and safety infusion, the battery power will be displayed as different levels in sound and light from nearly finish to exhausted |
| Move alarm | When try to move or take the syringe away, it will give alarm. |
HSP-8A Syringe Pump's Advantages
1. Our syringe pump could use all brands through calibration (default setting is Terumo).
2. Auto-recognize the syringe size: 10, 20, 30, 50ml.
3. Wide flow rate range from 0.1-1600ml/h.
4. Available for adjust alarm volume (3 levels), occlusion pressure (3 levels).
5. Power Switching Function:When AC power is disconnected, automatically switch into battery power supply and give indication. When the AC power is connected, automatically switch into AC power working.
6. Repeat Alarm Function: If the alarm real reason is not be resolved within 1 minutes after press 'SILENCE' button, it will give alarm again to remind to resolve the problem.he problem.
7. Battery Protection Alarm: For protect battery and safety infusion, the battery power will be displayed as different levels in sound and light from nearly finish to exhausted.
8. Double confirmation function when flow rate≥300ml/h, make safer and avoid misoperation.ion.ion.
9. The data can be cleared, make safer.
10. Lock the control panel during infusion, make safer.
11 For avoid misoperation, press 'POWER' for 3 seconds to close the pump.e the pump.
12. Real display the battery power in panel.
13. Different alarm light display in red and yellow color base different priority level.
14. RS232 port, able to connect with the computer.
15. KVO (Keep Vein Open) function. After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.1ml/h.
16. Bolus (Quick Infuse) function.
17. Purge (Evacuate Bubble) function.
18. The bright & large LCD screen, easy look look look
19. The battery can be used continuously for 6 hours after full charged.
20. The chip in syringe pump is be processed by ourselves on SMT machine production line instead of by manual work, as weld every point by hand.
21. CPU control, stable function, high reliability.
