Ce Approved Medical Portable Infusion Pump (HIP-7)
Ce批准的医疗便携式输液泵（HIP-7）
| 型号。 | 嘻哈7 |
| 医疗器械监管类型 | 类型2 |
| 证书 | ce iso |
| 重量 | 约2.15kg |
| 内置电池 | 直流12v 1800mah |
| 电池连续使用时间 | 6小时以上 |
| 输液范围 | 0.1ml〜9999.9ml，原值为0.1ml |
| 规范 | ce，iso |
| HS编码 | 9018909090 |
| 医疗器械注册/记录号 | Ssyjxzz20122210576 |
| 保证 | 12个月 |
| 尺寸（mm） | 140（L）×160（宽）×220（H））×220（H）20(H))×220(H) |
| 电源 | ac 90v〜ac 242v / 50hz |
| 电池型号 | jbt ni-mh |
| 能量消耗 | ≤18va; 18VA18va |
| 商标 | Healicom |
| 起源 | 中国江苏 |
基本参数：
特殊功能：
HIP-7输液泵的优点
1.可用所有品牌的标准IV套，该泵具有120级调节以保持高精度。
2.电源切换功能：当交流电源断开时，自动切换到电池电源并进行指示。交流电源连接后，自动切换到交流电源工作。
3.压力测定方法：采用先进的侧压管技术，避免门形成堵塞压力测量值。
4.流体控制方式：采用原有的流量抑制器锁定技术，方便单手安装IV管。
5.数据存储功能：可以保存最新的设置报警音量，流量精度，等级和时钟，以供下次使用。能够节省5年。
6.电机防反转功能，避免上游，使输液过程更加安全。
7.闹铃音量：三级可调，适合不同听力人士。
8.三级闭塞压力调节。
9.精确的超声波气泡检测器可以检测气泡的智能，安全可靠。
10当流量≥300ml/ h时，双重确认功能，更安全，避免误操作。ion.
当管道破裂时，药液不会进入泵内。
12.输液时自动锁定控制面板，避免误操作。
明亮的大屏幕液晶显示屏距离10米远。ters.
门的透明窗口可以看到注入状态。
门的一侧的灯光很方便夜间操作。
实时显示输入音量。
17. KVO（保持静脉打开）：完成设定输液量后，为防止形成血栓，以0.3ml / h或0.1ml / h的最低速度保持输液。
18. bolus（Quick Infuse）功能
清除（疏散泡沫）功能
20历史记录：能够保存1000个
适用于大范围电压上下。
22采用进口主要备件：日本东芝驱动模块，美国ATMEL和日本NEC芯片，具有良好的抗干扰功能。
23.注射泵中的芯片由我们自己在SMT机器生产线上处理，而不是通过手动加工，每个点都用手焊接。
| 尺寸（mm） | 140（L）×160（宽）×220（H）×220（H）220(H)×220(H) |
| 重量 | 约2.15Kg |
| 电源 | ac 90v〜ac 242v，50hz |
| 内置电池 | 直流12v 1800mah |
| 电池型号 | jbt ni-mh |
| 电池连续使用时间 | 6小时以上 |
| 能量消耗 | ≤18va18va18VA |
| 输液流选择 | 0.1ml / h〜1200ml / h（6〜150d / min），原值为0.1ml / h（1d / min） |
| 输液范围 | 0.1ml〜9999.9ml，原值0.1ml |
| 流量精度 | 体积模式±5％，下降模式±2d模式±2dusmn;2dmode ±2d |
| 阻塞压力水平 | 高：110kPa±20kPa（825mmHg±150mmHg）lusmn; 150mmHg）lusmn;150 mmHg) |
| 中间：80kPa±30kPa（600mmHg±225mmHg）加上225mmHg）plusmn;225mmHg) | |
| 低：60kPa±20kPa（450mmHg±150mmHg）lusmn; 150mmHg）lusmn;150 mmHg) | |
| 使用环境 | 温度5ºC〜43ºCCC〜43ºCrdm;CC~43ºC |
| 相对湿度≤90％RH（无冷凝状态）tus）tus) | |
| 大气压860hPa〜1060hPa | |
| 存储环境 | 温度-40ºC〜+55ºC〜+55ºCrdm;C~+55ºC |
| 相对湿度≤95％RH（无冷凝状态）tus）tus) | |
| 大气压860hPa〜1060hPa | |
| 防水等级 | IPX1（防滴） |
| 电击保护 | I类，BF型 |
| 报警 | 闭塞，完成，低电量，待机（无操作），空气在线，门打开，交流电源断开 |
特殊功能：
| 保持静脉打开（KVO） | 完成预定的输注体积后，为防止血栓形成，将继续输注达到最小比例（3ml / h或1ml / h） |
| 电源开关功能 | 当交流电源关闭时，可以自动切换到内置电池电源并同时提示。当交流电源接通时，自动转换回交流电源。 |
| 重复报警功能 | 操作员按下“SILENCE”键后，如果引起警报的原因未经处理2分钟，则会再次发出警报，提醒操作人员解决问题。 |
| 数据存储功能 | 保存音量级别，流量精度微调级别和遮挡压力级别以及时钟的最后一个设置，以备下次使用。最长的记忆时间是5年。 |
| 高流量安全确认 | 为了保证输液安全，当流量大于或等于300ml / h（或等效）时，装置将提示用户再次确认，确认前不进行输液。 |
| 光 | 为方便起见，在夜间或黑夜安装或拆卸IV时，门打开后灯会自动开启。灯是LED光源（白色）。 |
| 电池保护报警 | 为了保护电池并确保输液安全，当电池的电量从接近耗尽变为几乎耗尽时，存在不同程度的声光提示。 |
| 泡沫报警器 | 进入人体的气泡不断增多，可形成空气栓塞，危及生命。因此，当气泡长度为3mm（10.6ul）或累积气泡长度为3mm（10.6ul）时，会触发声光报警。 |
| 滴水传感器坡度 | 在d / min模式下，当出现管道斜坡，液体溢出和误放/移动传感器等问题时，会发生报警。 |
HIP-7输液泵的优点
1.可用所有品牌的标准IV套，该泵具有120级调节以保持高精度。
2.电源切换功能：当交流电源断开时，自动切换到电池电源并进行指示。交流电源连接后，自动切换到交流电源工作。
3.压力测定方法：采用先进的侧压管技术，避免门形成堵塞压力测量值。
4.流体控制方式：采用原有的流量抑制器锁定技术，方便单手安装IV管。
5.数据存储功能：可以保存最新的设置报警音量，流量精度，等级和时钟，以供下次使用。能够节省5年。
6.电机防反转功能，避免上游，使输液过程更加安全。
7.闹铃音量：三级可调，适合不同听力人士。
8.三级闭塞压力调节。
9.精确的超声波气泡检测器可以检测气泡的智能，安全可靠。
10当流量≥300ml/ h时，双重确认功能，更安全，避免误操作。ion.
当管道破裂时，药液不会进入泵内。
12.输液时自动锁定控制面板，避免误操作。
明亮的大屏幕液晶显示屏距离10米远。ters.
门的透明窗口可以看到注入状态。
门的一侧的灯光很方便夜间操作。
实时显示输入音量。
17. KVO（保持静脉打开）：完成设定输液量后，为防止形成血栓，以0.3ml / h或0.1ml / h的最低速度保持输液。
18. bolus（Quick Infuse）功能
清除（疏散泡沫）功能
20历史记录：能够保存1000个
适用于大范围电压上下。
22采用进口主要备件：日本东芝驱动模块，美国ATMEL和日本NEC芯片，具有良好的抗干扰功能。
23.注射泵中的芯片由我们自己在SMT机器生产线上处理，而不是通过手动加工，每个点都用手焊接。
| Model NO. | HIP-7 |
| Medical Device Regulatory Type | Type 2 |
| Certificate | CE ISO |
| Weight | About 2.15kg |
| Built-in Batteries | DC 12V 1800mAh |
| Battery Continuous Use Time | Above 6hrs |
| Infusion Range | 0.1ml~9999.9ml, Original Value Is 0.1ml |
| Specification | CE, ISO |
| HS Code | 9018909090 |
| Medical Devices Reg./Record No. | Ssyjxzz20122210576 |
| Warranty | 12months |
| Dimensions(mm) | 140(L)×160(W)×220(H))×220(H)20(H))×220(H) |
| Power Supply | AC 90V~AC 242V/50Hz |
| Battery Model | Jbt Ni-MH |
| Power Consumption | ≤18va;18va18va |
| Trademark | Healicom |
| Origin | Jiangsu, China |
Basic Parameter:
Special Functions:
HIP-7 Infusion Pump's Advantages
1. Available all brand of the standards IV sets, the pump has 120 levels adjustment to keep high precision.
2. Power Switching Function:When AC power is disconnected, automatically switch into battery power supply and give indication. When the AC power is connected, automatically switch into AC power working.
3. Piezometry Method: Adopts advanced lateral pressure pipe technology, avoid the door be out of shape effect occlusion pressure measured value.
4. Fluid Control Way: Adopts original flow suppresser lock technology, convenient to install IV pipe in single hand.
5. Data Memory Function: Able to save the latest setting alarm volume, flow precision fine level, occlusion pressure levels and clock, for use next time. Be able to save 5 years.
6. Anti-reverse function on motor to avoid upstream, make safer for patient during infusion.
7. Alarm Volume: Three levels adjustable, to suit for different hearing people.
8. Three levels occlusion pressure adjustment.
9. The accurate ultrasonic bubble detector detects the bubble intelligent, safe and reliable.
10 Double confirmation function when flow rate≥300ml/h, make safer and avoid misoperation.ion.ion.
11. When the pipe broken, the medicine liquid will not into the pump.
12. Auto-lock control panel during infusion, to avoid misoperation.
13. The bright & large LCD screen could be clear seen far from 10 meters.ters.ters.
14. The transparent window in door could see infuse status.
15. The light in the side of the door is convenient to operate in the night.
16. Real-time display infused volume.
17. KVO (Keep Vein Open):After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.3ml/h or 0.1ml/h.
18. Bolus (Quick Infuse) function
19. Purge (Evacuate Bubble) function
20 History Record:Be able to save1000 pcs
21. Suit for large range voltage up and down.
22 Adopts imported main spare parts: Japan Toshiba driver module, USA ATMEL and Japan NEC chip, good anti-interference function.
23. The chip in syringe pump is be processed by ourselves on SMT machine production line instead of by manual work, as weld every point by hand.
| Dimensions(mm) | 140(L)×160(W)×220(H)×220(H)220(H)×220(H) |
| Weight | About 2.15Kg |
| Power Supply | AC 90V~AC 242V,50HZ |
| Built-in batteries | DC 12V 1800mAh |
| Battery Model | JBT Ni-MH |
| Battery Continuous Use Time | Above 6hrs |
| Power consumption | ≤18VA18VA18VA |
| Infusion Flow Selection | 0.1ml/h~1200ml/h(6~150d/min), original value is 0.1ml/h (1d/min) |
| Infusion Range | 0.1ml~9999.9ml, original value is 0.1ml |
| Flow Rate Precision | volume mode ±5%, drop mode ±2dmode ±2dusmn;2dmode ±2d |
| Occlusion Pressure Level | High:110kPa±20kPa (825mmHg±150 mmHg)lusmn;150 mmHg)lusmn;150 mmHg) |
| Middle:80kPa±30kPa (600mmHg±225mmHg)plusmn;225mmHg)plusmn;225mmHg) | |
| Low:60kPa±20kPa (450mmHg±150 mmHg)lusmn;150 mmHg)lusmn;150 mmHg) | |
| Use Environment | Temperature 5ºC~43ºCC~43ºCrdm;CC~43ºC |
| Relative Humidity ≤90%RH (Under without condensation status)tus)tus) | |
| Atmospheric Pressure 860hPa~1060hPa | |
| Storage Environment | Temperature -40ºC~+55ºC~+55ºCrdm;C~+55ºC |
| Relative Humidity ≤95%RH (Under without condensation status)tus)tus) | |
| Atmospheric Pressure 860hPa~1060hPa | |
| Waterproof Level | IPX1 (drip-proof) |
| Electric Shock Protection | Class I, Type BF |
| Alarm | Occlusion, finish, low battery, standby (no operation), air in line, door open, AC power disconnected |
Special Functions:
| Keep-Vein-Open (KVO) | After finishing predetermined infusion volume, to prevent the formation of thrombus, will continue infusion with agreed minimum rate (3ml/h or 1ml/h) |
| Power Supply Switching Function | When the AC power supply is off, it can be automatically switched to built-in battery power supply and prompt at the same time. When AC is switched on, automatically converted back to AC supply. |
| Repeat Alarm Function | After the operator presses the 'SILENCE' key, if the reason causing the alarm has been untreated for 2 minutes, the alarm will sound again to alert the operator to solve the problem.he problem. |
| Data Memory Function | Save the last setting of sound volume level, flow precision fine tuning level and occlusion pressure level, as well as the clock, to prepare for the next use. The longest memory time is 5 years. |
| High Flow Safety Confirm | In order to ensure infusion safety, when the flow rate is greater than or equal to 300ml/h (or equivalent), the device will prompt user to confirm again, and will not carry out infusion before confirmation. |
| Light | For convenience, when installing or removing IV set at night or in darkness, light will automatically turn on after the door is open. The light is an LED light source (white). |
| Battery Protection Alarm | In order to protect the battery and ensure infusion safety, there are different levels of acousto-optic prompts when the electric quantity of the battery is changing from close to depletion to almost depleted. |
| Bubble Alarm | A continuously large number of bubbles going into the human body can form the air embolus, and it is life-threatening. So when bubble length is 3mm (10.6ul) or accumulated bubble length is 3mm (10.6ul) is detected, will trigger acoustic-optic alarm. |
| Drip Sensor Slope | In d/min mode, when there are problems such as tube slope, liquid overflow and misplaced/moved sensor, there will be an alarm. |
HIP-7 Infusion Pump's Advantages
1. Available all brand of the standards IV sets, the pump has 120 levels adjustment to keep high precision.
2. Power Switching Function:When AC power is disconnected, automatically switch into battery power supply and give indication. When the AC power is connected, automatically switch into AC power working.
3. Piezometry Method: Adopts advanced lateral pressure pipe technology, avoid the door be out of shape effect occlusion pressure measured value.
4. Fluid Control Way: Adopts original flow suppresser lock technology, convenient to install IV pipe in single hand.
5. Data Memory Function: Able to save the latest setting alarm volume, flow precision fine level, occlusion pressure levels and clock, for use next time. Be able to save 5 years.
6. Anti-reverse function on motor to avoid upstream, make safer for patient during infusion.
7. Alarm Volume: Three levels adjustable, to suit for different hearing people.
8. Three levels occlusion pressure adjustment.
9. The accurate ultrasonic bubble detector detects the bubble intelligent, safe and reliable.
10 Double confirmation function when flow rate≥300ml/h, make safer and avoid misoperation.ion.ion.
11. When the pipe broken, the medicine liquid will not into the pump.
12. Auto-lock control panel during infusion, to avoid misoperation.
13. The bright & large LCD screen could be clear seen far from 10 meters.ters.ters.
14. The transparent window in door could see infuse status.
15. The light in the side of the door is convenient to operate in the night.
16. Real-time display infused volume.
17. KVO (Keep Vein Open):After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.3ml/h or 0.1ml/h.
18. Bolus (Quick Infuse) function
19. Purge (Evacuate Bubble) function
20 History Record:Be able to save1000 pcs
21. Suit for large range voltage up and down.
22 Adopts imported main spare parts: Japan Toshiba driver module, USA ATMEL and Japan NEC chip, good anti-interference function.
23. The chip in syringe pump is be processed by ourselves on SMT machine production line instead of by manual work, as weld every point by hand.
