Medical Portable Syringe Infusion Pump
医疗便携式注射器输液泵
| 型号。 | 嘻哈5 |
| 医疗器械监管类型 | 类型2 |
| 证书 | ce iso |
| 气压 | 860hpa〜1060hpa |
| 能量消耗 | ≤25va; 25VA25va |
| 闭塞压力 | 60〜90 Kpa |
| 外形尺寸（Cm） | 14（L）×15（宽）X22（H） |
| 规范 | ce，iso |
| HS编码 | 9018909090 |
| 医疗器械注册/记录号 | Ssyjxzz20122210576 |
| 保证 | 12个月 |
| 电源 | AC220V±22V / 50HZ±1Hz的/ 50HZ±1Hz的mn;1Hz/50Hz±1Hz |
| 重量 | 约2.5kg |
| 流量选项 | 1ml / H〜999ml / H，1ml / H增量 |
| 流量误差 | ±5％plusmn; 5％lusmn;5% |
| 商标 | Healicom |
| 起源 | 中国江苏 |
HIP-5输液泵
简介：HIP-5输液泵是一种结构紧凑的仪器。它采用微机技术设计。具有多功能报警功能，同时具有快速运输功能。产品安装充电电池可用于现场和边缘地区的救援工作，满足医院各种需要。主要用于内科，外科，应急，儿科，妇科，血液科，ICU监护病房，CCU监护病房等化疗和化疗输液。
HIP-5输液泵的优点
1.可用所有品牌的标准IV套，该泵具有120级调节以保持高精度。
三级闭塞压力调节。
3.精确的超声波气泡检测器可以检测气泡的智能，安全可靠。
4.流量≥300ml/ h时双重确认功能，更安全，避免误操作。ion.
5.电机防反转功能，避免上游，使输液过程更加安全。
当管道破裂时，药液不会进入泵内。
7.采用进口主要备件：日本东芝驱动模块，美国ATMEL和日本NEC芯片，具有良好的抗干扰功能。
8.输液过程中自动锁定控制面板，避免误操作。
9.可以单独设置流量，十位数字和数位分别设置，不需要增加单位数。
明亮而大的LED屏幕距离10米远可以看得清楚。ters.
门的透明窗口可以看到注入状态。
实时显示输入音量。
门侧的灯在近处操作便利
KVO（保持静脉打开）功能
15. bolus（Quick Infuse）功能
清除（疏散气泡）功能
多报警，使安全。
18.便携式，重量仅1.8KG。
19.轻松更换电池，只打开电池盖。
20.电路设计好，消耗≤10VA.0VA。0VA.
适用于大范围电压上下。
22.注射泵中的芯片在SMT机器生产线上由我们自己处理，而不是通过手动加工，每一点用手焊接。
简介：HIP-5输液泵是一种结构紧凑的仪器。它采用微机技术设计。具有多功能报警功能，同时具有快速运输功能。产品安装充电电池可用于现场和边缘地区的救援工作，满足医院各种需要。主要用于内科，外科，应急，儿科，妇科，血液科，ICU监护病房，CCU监护病房等化疗和化疗输液。
| 工作条件 | 电源 | AC220V±22V，50HZ±1hz50hz±1Hz的smn;1HZ50HZ±1HZ |
| 内置电池 | D.C.12V，充满电后可连续使用电池2小时（24小时） | |
| 环境条件 | 温度-5ºC〜+40ºC〜+40ºCrdm;C~+40ºC 相对湿度≤80％RH0％RH0%RH | |
| 气压 | 860hPa〜1060hPa | |
| 储存条件 | 温度：-40ºC〜+55ºC〜+55ºCrdm;C~+55ºC 相对湿度≤95％RH5％RH5%RH | |
| 基本参数 | 外形尺寸（cm） | 14（L）×15（宽）X22（H） |
| 重量 | 约2.5kg | |
| 能量消耗 | ≤25va25va25VA | |
| 流量选项 | 1ml / h〜999ml / h，1ml / h增量 | |
| 阻塞压力 | 60〜90 kPa | |
| 流量误差 | ±5％lusmn; 5％lusmn;5% | |
| 报警 | 堵塞，空，电池电量不足，待机，空气排线，门打开，电机故障 | |
| 功能 | 输液量设定，电源指示，可选报警音量，KVO（保持静脉打开），闭塞压力调节，流量水平调整 |
HIP-5输液泵的优点
1.可用所有品牌的标准IV套，该泵具有120级调节以保持高精度。
三级闭塞压力调节。
3.精确的超声波气泡检测器可以检测气泡的智能，安全可靠。
4.流量≥300ml/ h时双重确认功能，更安全，避免误操作。ion.
5.电机防反转功能，避免上游，使输液过程更加安全。
当管道破裂时，药液不会进入泵内。
7.采用进口主要备件：日本东芝驱动模块，美国ATMEL和日本NEC芯片，具有良好的抗干扰功能。
8.输液过程中自动锁定控制面板，避免误操作。
9.可以单独设置流量，十位数字和数位分别设置，不需要增加单位数。
明亮而大的LED屏幕距离10米远可以看得清楚。ters.
门的透明窗口可以看到注入状态。
实时显示输入音量。
门侧的灯在近处操作便利
KVO（保持静脉打开）功能
15. bolus（Quick Infuse）功能
清除（疏散气泡）功能
多报警，使安全。
18.便携式，重量仅1.8KG。
19.轻松更换电池，只打开电池盖。
20.电路设计好，消耗≤10VA.0VA。0VA.
适用于大范围电压上下。
22.注射泵中的芯片在SMT机器生产线上由我们自己处理，而不是通过手动加工，每一点用手焊接。
| Model NO. | HIP-5 |
| Medical Device Regulatory Type | Type 2 |
| Certificate | CE ISO |
| Atmospheric Pressure | 860hpa~1060hpa |
| Power Consumption | ≤25va;25va25va |
| Occlusion Pressure | 60~90 Kpa |
| Outline Size (Cm) | 14(L)X15(W)X22(H) |
| Specification | CE, ISO |
| HS Code | 9018909090 |
| Medical Devices Reg./Record No. | Ssyjxzz20122210576 |
| Warranty | 12months |
| Power Supply | AC220V±22V/50Hz±1Hz/50Hz±1Hzmn;1Hz/50Hz±1Hz |
| Weight | About 2.5kg |
| Flow Rate Options | 1ml/H~999ml/H, in 1ml/H Increment |
| Flow Rate Error | ±5%plusmn;5%lusmn;5% |
| Trademark | Healicom |
| Origin | Jiangsu, China |
HIP-5 Infusion Pump
Introduction: HIP-5 infusion pump is a compact structure instrument. It is designed with microcomputer technology. It has multi-alarm function and takes on the function of speedy transportation simultaneously. The product installs rechargeable battery can be use for the rescue work in field and in verge areas and satisfied with all kind of needs of hospital. It is mainly use as phleboclysis and chemotherapy infusion in the department of internal medicine, surgery, emergency, pediatrics, gynecology and department of blood, ICU monitor ward, CCU monitor ward and so on.
HIP-5 Infusion Pump's Advantages
1. Available all brand of the standards IV sets, the pump has 120 levels adjustment to keep high precision.
2. Three levels occlusion pressure adjustment.
3. The accurate ultrasonic bubble detector detects the bubble intelligent, safe and reliable.
4. Double confirmation function when flow rate≥300ml/h, make safer and avoid misoperation.ion.ion.
5. Anti-reverse function on motor to avoid upstream, make safer for patient during infusion.
6. When the pipe broken, the medicine liquid will not into the pump.
7. Adopts imported main spare parts: Japan Toshiba driver module, USA ATMEL and Japan NEC chip, good anti-interference function.
8. Auto-lock control panel during infusion, to avoid misoperation.
9. Able to set flow rate by single digit, tens digit and hundreds digit separately, not need to increase from single digit.
10. The bright & large LED screen could be clear seen far from 10 meters.ters.ters.
11. The transparent window in door could see infuse status.
12. Real-time display infused volume.
13. The light in the side of the door is convenient to operate in the nigh
14. KVO (Keep Vein Open) function
15. Bolus (Quick Infuse) function
16. Purge (Evacuate Bubble) function
17. Multi-alarm, make safer.
18. Portable, light weight only 1.8KG.
19. Easy to change the battery, only open the battery cover.
20. Good circuit design, consumption≤10VA.0VA.0VA.
21. Suit for large range voltage up and down.
22. The chip in syringe pump is be processed by ourselves on SMT machine production line instead of by manual work, as weld every point by hand.
Introduction: HIP-5 infusion pump is a compact structure instrument. It is designed with microcomputer technology. It has multi-alarm function and takes on the function of speedy transportation simultaneously. The product installs rechargeable battery can be use for the rescue work in field and in verge areas and satisfied with all kind of needs of hospital. It is mainly use as phleboclysis and chemotherapy infusion in the department of internal medicine, surgery, emergency, pediatrics, gynecology and department of blood, ICU monitor ward, CCU monitor ward and so on.
| Work condition | Power supply | AC220V±22V,50HZ±1HZ50HZ±1HZsmn;1HZ50HZ±1HZ |
| Built-in battery | D.C.12V, the battery can be used continuously for 2 hours after full charged (24hours) | |
| Environmental condition | temperature -5ºC~+40ºC~+40ºCrdm;C~+40ºC relative humidity ≤80%RH0%RH0%RH | |
| Atmospheric pressure | 860hPa~1060hPa | |
| Storage condition | temperature: -40ºC~+55ºC~+55ºCrdm;C~+55ºC relative humidity ≤95%RH5%RH5%RH | |
| Basic parameter | Outline size (cm) | 14(L)x15(W)x22(H) |
| Weight | about 2.5kg | |
| Power consumption | ≤25VA25VA25VA | |
| Flow rate options | 1ml/h~999ml/h, in 1ml/h increment | |
| Occlusion pressure | 60~90 kPa | |
| Flow rate error | ±5%lusmn;5%lusmn;5% | |
| Alarm | occlusion, empty, low battery, standby, air in line, door open, motor troubles | |
| Function | infusion amount setting, power indication, optional alarm sound volume, KVO (keep vein open), occlusion pressure adjustment, flow rate level adjustment |
HIP-5 Infusion Pump's Advantages
1. Available all brand of the standards IV sets, the pump has 120 levels adjustment to keep high precision.
2. Three levels occlusion pressure adjustment.
3. The accurate ultrasonic bubble detector detects the bubble intelligent, safe and reliable.
4. Double confirmation function when flow rate≥300ml/h, make safer and avoid misoperation.ion.ion.
5. Anti-reverse function on motor to avoid upstream, make safer for patient during infusion.
6. When the pipe broken, the medicine liquid will not into the pump.
7. Adopts imported main spare parts: Japan Toshiba driver module, USA ATMEL and Japan NEC chip, good anti-interference function.
8. Auto-lock control panel during infusion, to avoid misoperation.
9. Able to set flow rate by single digit, tens digit and hundreds digit separately, not need to increase from single digit.
10. The bright & large LED screen could be clear seen far from 10 meters.ters.ters.
11. The transparent window in door could see infuse status.
12. Real-time display infused volume.
13. The light in the side of the door is convenient to operate in the nigh
14. KVO (Keep Vein Open) function
15. Bolus (Quick Infuse) function
16. Purge (Evacuate Bubble) function
17. Multi-alarm, make safer.
18. Portable, light weight only 1.8KG.
19. Easy to change the battery, only open the battery cover.
20. Good circuit design, consumption≤10VA.0VA.0VA.
21. Suit for large range voltage up and down.
22. The chip in syringe pump is be processed by ourselves on SMT machine production line instead of by manual work, as weld every point by hand.
