婴儿新生儿婴儿辐射保暖器（SC-BN100）

特征：
基于微处理器的伺服控制温度系统

三种模式：预热手动和自动

分别设置温度和皮肤温度

防爆微晶石英用于辐射源

自检功能，各种故障报警通过视听

透明保护膜可以折叠，两个输液密封

RS232连接器

可选功能：加热床垫

这个 加热床垫 是新设计的 为婴儿保暖,它由天鹅绒和碳纤维加热丝组成，具有良好的保暖性能. 其柔软感和压缩性能的特点可以满足临床要求.此外，这种床垫是防水和可洗的.

(1) 主要技术参数

1. 尺寸：670 *540毫米

2. 额定输入电压：DC12V

3. 额定功率:10W

4. 温度控制范围:房间内的床垫温度保持在31°C左右 room

5. 温差偏差：±2ºCusmn;2ºCrdm;Cusmn;2ºC

6. 床垫温度均匀：±2ºCusmn;2ºCrdm;Cusmn;2ºC

7. 重量：1.5公斤

(2) 使用说明

平躺床垫,并将插头插入DC12V输出插座，然后在10分钟内达到所需温度.

(3) 维护

床垫应避免大量的折叠，保持干燥和清洁，并且maknd makd make periodical 消毒 通过 紫外线 光.

Baby Neonate Infant Radiant Warmer (SC-BN100)

Features:
Microprocessor based servo controlled temperature system

Three modes: Pre-warm Manual and automatic

Set temperature and skin temperature display separately

Anti-explosion micro crystal quartz for radiation source

Self - testing function, various failure alarms by audible and visual

Transparent protector can be folded down,with two infusion seals

RS232 connector

Optional function: heating mattress

This heating mattress is newly designed for Infant warmer,and it is made up of velveteen and carbon fiber heating wire, so it has good performance of keeping warmth. Its feature of soft feeling and compressive property can satisfy clinical request.Besides, this mattress is waterproof and washable.

(1) Main technical data

1. Size:670*540mm

2. Rated input voltage:DC12V

3. Rated power:10W

4. Temp control range:The mattress temp keep steady around 31°C inside room room room

5. Temp deviation:±2ºCusmn;2ºCrdm;Cusmn;2ºC

6. Mattress temp uniformity:±2ºCusmn;2ºCrdm;Cusmn;2ºC

7. Weight:1.5KG

(2) Instruction of usage

Lay the mattress flatwise,and insert the plug to the DC12V output socket at back, then it will reach the needed temperature within 10mins.

(3) The maintenance

The mattress should avoid huge folding and keep dry&clean, and maknd makd make periodical disinfection by ultraviolet light.