Mslhx06 High Frequency and Pressure X Ray Machine
Mslhx06高频和高压X射线机
(1) 高频和压力发生器：尺寸：600 * 420 * 650mm
v 高频多脉冲X射线发生器用于无线电诊断，确保数据和重复'精度和缩短曝光时间。
v
v 具有最专业，最稳定的高频和压力发生器，实现了高剂量输出，高功率负载和超高频逆变器，完美保证用户' 射线照相质量。发电机兼容几乎所有好的品牌的管在世界上。
v 它配备了具有管过载保护的APR / AEC）
v 发电机的控制功能集成在系统控制中心
v 它的额定电压高达150KV，可以满足高频成膜要求
v 50KW大容量使更长的不间断工作
v 完美的性能和稳定性
v 为大多数发电机设置参数会导致时间浪费是复杂的。但我们的发电机配备了更简单的参数设置和固件更新程序。
v 旋转阳极'能量显示和保护可以防止过载导致的管道过热。
v 它通过直流电阻止旋转阳极，暴露后噪声较小。
X射线机的配置参数
| 没有。 | 技术要求 |
| 1 | 高频和压力X射线发生器用于医疗诊断 |
| 1.1 | 输入功率： 380V±38V,50Hz±1Hz. |
| 1.2 | 最大功率输出：50 kW |
| 1.3 | 摄影管电压：可连续调节，步进宽度可调1KV，可调范围： 40kV~150kV |
| 1.4 | 摄影管电流：可以通过部分调整。可调范围： 10mA〜630mA |
| 1.5 | 负载时间：可调范围：0.001-10秒 |
| 1.6 | 电流可以通过部分调节。可调范围： 0.1mAs〜500mAs |
| 1.7 | 工作频率：100℃千赫 |
| 2 | X射线管 |
| 2.1 | :最高峰值管电压：125kV |
| 2.2 | 最大灯丝电流's热特性：大焦距：5.4A，小焦距：5.4A。 |
| 2.3 | 焦距：小焦距：0.6mm;大焦距：2.0mm |
| 2.4 | 阳极输入功率：小焦距：18kw;大焦距：50kw |
| 2.5 | 阳极光学角：14° |
| 2.6 | 阳极转速：2800rmb |
| 2.7 | 阳极热容：160kJ（220kHU） |
| 2.8 | 管模块热容量：1250KHU（900KJ） |
| 3 | 影片床 |
| 3.1 | 长度： 2200mm±10% |
| 3.2 | 宽度：750mm±10% |
| 3.3 | 床面纵向移动范围： 1000mm±10％ |
| 3.4 | 床面横向移动范围： 250mm±10％ |
| 3.5 | 床面锁定方式：电磁锁（永磁） |
| 3.6 | 床面锁定控制：脚踏开关 |
| 3.7 | 断裂力： ≥100n |
| 3.8 | 起动力：≤50n |
| 3.9 | 床板承重： ≥150公斤 |
| 4 | 立柱 |
| 4.1 | 高度： 1920mm±10% |
| 4.2 | 上下移动范围： 420mm-1810mm±10% |
| 4.3 | 沿着所述车床的上下移动范围：2000mm±50mm |
| 4.4 | 垂直升降范围沿车床： 430mm-1660mm±10% |
| 4.5 | 平板检测器的左右移动范围：350mm±5% |
| 4.6 | X射线管模块'（横向臂周围的回转范围（动力制动锁定）： 360° |
| 4.7 | X射线管回转范围： 0° ±2° ~ ±90° ±2° |
| 4.8 | 立柱回转范围：固定 |
| 5 | 束限幅器 |
| 5.1 | 电源： 24vac,7A |
| 5.2 | 固有过滤 : 2.0mmAL/ 75kvp |
| 5.3 | 它易于打开和关闭，灵活可靠。它根据实际中的各种要求使得不同尺寸的矩形曝光场。 |
| 6 | 其他 |
| 6.1 | 高压电缆：≥8m |
打包清单
| 没有。 | ae | 单元 |
| 1. | X射线管支架 | 一套 |
| 2. | 胸骨架 | 一套 |
| 3. | 电影床 | 一套 |
| 4. | X射线管 | 一套 |
| 5. | 梁限定剪刀 | 一套 |
| 6. | 高频和压力X射线发生器用于医疗诊断 | 一套 |
| 7. | 操作控制台 | 一套 |
| 8. | 高压电缆 | 两个学院 |
(1) High frequency and pressure generator: Size: 600*420*650mm
v the high frequency multiple-pulse X ray generator is used for radio diagnosis, it ensures data and repetition's accuracy and shorten time of exposure.
v
v with the most professional and stable high frequency and pressure generator, it makes a high dose output,high power load and ultrahigh frequency contravariant which perfectly guarantees users' radiography quality. The generator is compatible with almost all good brands of tube in the world.
v it is equipped with APR/AEC which possess tube overload protection)
v the control functions of the generator are integrated in the system control center
v It can meet high frequency filming requirements since its rated voltage is with a high of 150KV
v 50KW large capacity makes a longer uninterrupted work
v perfect performance and stability
v it is complicated to set parameters for most of generators which lead to time wast. But our generator is equipped with easier parameters settings and firmwares updating programs.
v rotating anode's calorific capacity display and protection can prevent overheat of pipe shroud cause by overload.
v It stops the rotating anode by DC, it makes less noise after exposure.
Configuration parameter of the x-ray machine
| NO. | technical requirements |
| 1 | high frequency and pressure X ray generator for medical diagnostic use |
| 1.1 | input power: 380V±38V,50Hz±1Hz. |
| 1.2 | maximum power output :50 kW |
| 1.3 | Photography tube voltage:it can be adjusted continuously, adjustable step width is 1KV,adjustable range: 40kV~150kV |
| 1.4 | photography tube current:it can be adjusted by sections. Adjustable range: 10mA~630mA |
| 1.5 | load time: adjustable range: 0.001-10sec |
| 1.6 | current can be adjusted by sections. Adjustable range: 0.1mAs~500mAs |
| 1.7 | working frequency: 100kHz |
| 2 | X ray tube |
| 2.1 | :highest peak tube voltage: 125kV |
| 2.2 | maximum filament current's heat characteristic: big focus:5.4A, small focus:5.4A. |
| 2.3 | focus: small focus:0.6mm;big focus:2.0mm |
| 2.4 | Anode input power:small focus:18kw;big focus:50kw |
| 2.5 | Anode optics angle: 14 |
| 2.6 | rotate speed of Anode: 2800rmb |
| 2.7 | Anode thermal capacity: 160kJ (220kHU) |
| 2.8 | tube module thermal capacity: 1250KHU(900KJ) |
| 3 | Filming bed |
| 3.1 | length: 2200mm±10% |
| 3.2 | width: 750mm±10% |
| 3.3 | lengthways moving range of bed surface: 1000mm±10% |
| 3.4 | crosswise moving range of bed surface: 250mm±10% |
| 3.5 | bed surface locking pattern: electromagnetic lock(permanent magnet) |
| 3.6 | bed surface locking control: foot switch |
| 3.7 | breaking force: ≥100N |
| 3.8 | starting force:≤50N |
| 3.9 | load bearing of bed panel: ≥150kg |
| 4 | stand column |
| 4.1 | height: 1920mm±10% |
| 4.2 | up-and-down moving range: 420mm-1810mm±10% |
| 4.3 | up-and-down moving range along the lathe bed: 2000mm±50mm |
| 4.4 | vertical lift range along the lathe bed: 430mm-1660mm±10% |
| 4.5 | left and right moving range of flat panel detector : 350mm±5% |
| 4.6 | X ray tube module's slewing range around the cross arm(power brake locking): 360° |
| 4.7 | X ray tube slewing range: 0° ±2° ~ ±90° ±2° |
| 4.8 | stand column slewing range: fixed |
| 5 | beam-defining clipper |
| 5.1 | power supply: 24VAC,7A |
| 5.2 | inherent filtration : 2.0mmAL/75KVp |
| 5.3 | it is easy to turn on and off, flexible and reliable. It makes different sizes of rectangles exposure field in accordance with various requirements in practice. |
| 6 | others |
| 6.1 | high voltage cable:≥8m |
Packing list
| NO. | nae | unit |
| 1. | X ray tube holder | one set |
| 2. | sternum stand | one set |
| 3. | filming bed | one set |
| 4. | X ray tube | one set |
| 5. | Beam-defining clipper | one set |
| 6. | high frequency and pressure X ray generator for medical diagnostic use | one set |
| 7. | operating console | one set |
| 8. | high voltage cable | two faculties |
