High Frequency Mobile Radiography Unit (MSLMX06)
高频移动射线成像单元（MSLMX06）
MSLMX06高频移动放射摄影装置
规格
| 1. 3.5kW医疗移动x射线机 |
| 2.高频移动x射线机 |
| 3.移动x射线单位 |
| 4.移动x射线设备 |
| 5. 3.5kW移动射线成像设备 |
X射线机的介绍 - 你听说过有关X射线发现的故事吗？如何发现X射线？你能找出X光机的一些用途吗？
MSLMX06移动射线成像单元
一个带X射线发生器和控制面板的移动支架。
MSLMX06主要用于病房中的应用。然而，它也理想地适合用作移动诊断单元以支持其他医院规程。
特征
| 流动性 |
| MSLMX06可以在任何地方轮转：一个大型旋转手柄，由一个非常容易操纵的手推车支持，它可以精确，快速地定向到病人，通过狭窄的走廊和间隔很窄的床。从标准插座操作，无论需要在哪里。 |
| 2.易于管理 |
| 不引人注目的设计意味着操作者可以集中注意手术中的手术。在设计卫生设计的操作面板时考虑用户：清晰的符号使得参数的设置容易，并且可以立即在显示面板上检查这些值。 |
| 独特 |
| 新开发的3.5kW输出的转换器型发电机技术使MSLMX06成为同类产品中最高效的移动X射线单元。 |
主要技术参数：
1系统块
MSLMX06是一个移动X射线放射摄影单元。
它由支架和X射线发生器组成。 X射线发生器是HF转换器和DC高压发生器的类型。系统块如下：
照片电压范围：40〜110Kv
准直器位置调整±180
围绕支架管旋转：+180°/ -45
发电机 | ||
| 类型 | HF转换器，DC高压 | |
| 电压 | 可以从40到110 kV以1 kV的步进调节 | |
| mAs值 | 可在22步从1到160 mAs，满足R'10降噪。其为1,1.3,1.6,2,2.5,3.2,4,5,6.3,8,10,12.5,16,20,25,32，40,50,63,80,100,125和160.在一个实施方案中，本发明提供了一种用于治疗和/ | |
| 输出 | 3.5kW（100kV / 35mA） | |
| 110kV 30mA | ||
| 80kV 46mA | ||
| 40kV 70mA | ||
| 工作模式 | 以间歇加载方式运行 | |
| 公差 | kV +/- 10％ | |
| mAs +/-（10％+ 0.2mAs） | ||
| X射线管（什么是X射线管？X射线管的结构） | ||
| 类型 | XD6A-0.5,3.5 / 125;固定阳极 | |
| 目标材料 | 钨 | |
| 目标角度 | 15° | |
| 焦点尺寸 | 1.5mm | |
| 正常电压 | 110kV | |
| 最大。热容量 | 57kj（76khu） | |
| X射线管组件 | ||
| 功率 | 3.5kW | |
| 最大。正常电压 | 110kV | |
| 固定滤波器 | 2.7mmAl | |
| 隔离类型 | 油 | |
| 温度保护 | 55°C温度继电器 | |
| 最大。热容量 | 800kj（1040khu） | |
| 最大连续散热 | 260W | |
| 准直器 | ||
| 最大。场地1m | 43cm X 43cm | |
| 辐射数据 | ||
| 总过滤器 | 2.8mmAl | |
| 泄漏辐射 | 平均空气Kerma速率小于1.0mGy / h在周围和距离焦点1m的距离（装载设置110kV和工作10000mAs最大1小时） | |
| 可拆卸滤波器： | 2.8mmAl | |
| 漏电流 | ||
| 漏电流接地 | 正常：不大于2.5mA | |
| 单故障：不大于5mA | ||
| 泄漏电流到盖 | 正常：不大于0.1mA | |
| 单故障：不大于0.5mA | ||
| 电源 | ||
| 电压 | 220V交流 | |
| 最大。电压容差 | +/-10% | |
| 频率 | 50Hz | |
| 最大。频率偏差 | +/- 1Hz | |
| 最大。阻抗 | 0.60W | |
| 熔断 | 220V，16A慢 | |
| 环境 | ||
| 温度 | 10〜40℃ | |
| 相对湿度 | 30〜75％ | |
| 气压 | 700〜1060hPa | |
| 运动和重量 | ||
| 从管焦距到地面的距离 | 50cm至190cm，可调 | |
| 围绕管组件的臂旋转 | + 90°至-90° | |
| 绕管组件轴线旋转 | -45°至+ 90° | |
| 重量 | 102kg | |
MSLMX06 High frequency mobile radiography unit
Specifications
| 1. 3.5kW Medical mobile x-ray machine |
| 2. High frequency mobile x-ray machine |
| 3. Mobile x-ray unit |
| 4. Mobile x-ray equipment |
| 5. 3.5kW Mobile Radiography equipment |
The introdution of x-ray machine- Have you ever heard of the story about the discovery of X-ray? How was X-ray discovered? Could you figure out some uses of X-ray machine?
MSLMX06 Mobile Radiography Unit
One mobile stand with X-ray generator and control panel.
The MSLMX06 is designed primarily for applications in wards. However, it is also ideally suitable for use as a mobile diagnostic unit to support other hospital disciplines.
Features
| 1. Mobility |
| The MSLMX06 can be wheeled anywhere: a large revolving handle, supported by an extremely easy-to- manoeuvre trolley means it can be directed precisely and quickly to the patient, through narrow corridors and between closely-spaced rows of beds. operated from a standard socket, wherever it is needed. |
| 2. Easy to manage |
| The unobtrusive design means that the operator can concentrate, without distraction, on the procedure in hand. The hygienically designed operating panel was conceived with the user in mind: clear symbols make for easy setting of the parameters, and the values can be immediately checked on the display panel. |
| 3. Unique |
| The newly developed converter type generator technology with 3.5kW output makes the MSLMX06 the most efficient mobile X-ray unit in its class. |
Main Technical Parameter:
1 System Block
MSLMX06 is one mobile X-ray radiography unit.
It is consist of Stand and X-ray generator. The X-ray generator is type of HF converter and DC high voltage generator. System block is as follow:
Photo voltage rang:40 ~ 110Kv
Collimator position adjustment ± 180
Around the stent tube rotation: +180 ° / -45
Generator | ||
| Type | HF converter, DC High Voltage | |
| Voltage | Adjustable in steps of 1 kV from 40 to 110 kV | |
| mAs Values | Adjustable in 22 steps from 1 to 160 mAs, meeting R'10 noise reduction . It is 1, 1.3, 1.6, 2, 2.5, 3.2, 4, 5, 6.3, 8, 10, 12.5, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 and 160. | |
| Output | 3.5kW (100kV/35mA) | |
| 110kV 30mA | ||
| 80kV 46mA | ||
| 40kV 70mA | ||
| Working mode | Run in intermittent loading | |
| Tolerance | kV +/- 10 % | |
| mAs +/- (10 % + 0.2mAs) | ||
| X-ray Tube ( What is an x-ray tube? The construction of x-ray tube ) | ||
| Type | XD6A-0.5,3.5 / 125; Stationary Anode | |
| Material of Target | Tungsten | |
| Angle of Target | 15° | |
| Focal Spot Size | 1.5mm | |
| Normal Voltage | 110kV | |
| Max. Heat capacity | 57kJ (76kHU) | |
| X-ray Tube Assembly | ||
| Power | 3.5kW | |
| Max. Normal Voltage | 110kV | |
| Fixed filter | 2.7mmAl | |
| Isolation type | Oil | |
| Temperature Protective | 55°C Temperature relay | |
| Max. Heat capacity | 800kJ (1040kHU) | |
| Max continuous heat dissipation | 260W | |
| Collimator | ||
| Max. Field at 1m | 43cm X 43cm | |
| Data for Radiation | ||
| Total Filter | 2.8mmAl | |
| Leakage Radiation | Avg. Air Kerma Rate less than1.0mGy/h at all places that around and 1m distance from focal spot.(Loading set 110kV and work 10000mAs max in 1 hour) | |
| Irremovable filter : | 2.8mmAl | |
| Leakage Current | ||
| Leakage current to Ground | Normal:Not more than 2.5mA | |
| Single Fault:Not more than 5mA | ||
| Leakage current to Covers | Normal:Not more than 0.1mA | |
| Single Fault:Not more than 0.5mA | ||
| Power supply | ||
| Voltage | 220V ac | |
| Max. voltage tolerance | +/-10% | |
| Frequency | 50Hz | |
| Max. Frequency deviation | +/-1Hz | |
| Max. impedance | 0.60W | |
| Fusing | 220V,16A Slow | |
| Environment | ||
| Temperature | 10 to 40°C | |
| Relative Humidity | 30 to 75% | |
| Atmospheric Pressure | 700 to 1060hPa | |
| Movement and Weight | ||
| Distance from Tube Focal to Floor | 50cm to 190cm, adjustable | |
| Rotation around arm of Tube assembly | +90°to -90° | |
| Rotation around axis of Tube assembly | -45°to +90° | |
| Weight | 102kg | |
