婴儿复苏机
SC-ad3000tpb

特征：
它主要用于送货室，婴儿区，NICU那个宝宝'最大重量可达10KG。

通过调节氧气和空气的比例来配置不同浓度的医用氧气。

内部有差压报警系统。当报警时，安全阀自动启动，连续生产混合气体，确保患者的安全，

调整氧浓度从21％~100%.

流量调节范围为5LPM~15lpm。

MAX-P和PIP是安全，可控和准确的。

PEEP是恒定和准确的。

操作简单，应用灵活。

输出压力不受操作员的影响'的经验，训练，注意力和疲劳。

而不是临时呼吸支持。

技术规格：

型号：ad3000-tpb

流量控制：5LPM~15lpm

氧气浓度：21％~100%

供气故障：空气源中断或压力差大于0.1MPa时，会发出声音报警

声音报警：至少持续60s，声音级别应超过60dB（A）

压力 测量: -2~10kpa(-20~100cmH2O）

最大-P： @ 0~15lpm ≤≤le;≤6kPa（60cmH2O）

pip：@5~15LPM 0.2~5.7kPa（2〜57厘米H2O）

窥视：@5~15lpm 0.03~2.3kPa（0.3〜23厘米H2O）

工作噪音： ≤≤le;≤55分贝（a）中

重量范围建议： 最大。10公斤

工作和存储限制：-20ºCordm;Çordm;C~50ºCordm;Çordm;C，相对湿度可达90％

工作时间（400L 气瓶）：@ 8lpm /50分钟s

质量认证：ISO 13485

Infant Resuscitator
SC-AD3000TPB

Features:
It is mainly used on delivery room, baby wards, NICU that the baby's maximum weight up to 10KG.

The different concentrations of medical oxygen will be configured by adjusting the proportion of oxygen and air.

Inside an alarm system of differential pressure. When alarming, the safety valve starts automatically, and produces the mixture gas continuously to ensure the safety of patients,

Adjust the oxygen concentration from 21%~100%.

The range of flow adjustment is 5LPM~15LPM.

The MAX-P and PIP are safe, controlled and accurate.

The PEEP is constant and accurate.

Simple operation and flexible application.

The output pressure would not be influenced by the operator's experience, training, attention and fatigue.

Instead of temporary breathing support.

Technical specification:

Model: AD3000-TPB

Flow control: 5LPM~15LPM

Oxygen concentration: 21%~100%

Air supply failure: While air source interrupted or the pressure difference more than 0.1MPa,it shall alarmed by sound

Sound alarm: At least continue 60s,and the level of sound shall more than 60dB(A)

Pressure gauge: -2~10KPa(-20~100cmH2O)

MAX-P: @ 0~15LPM ≤≤le;≤6kPa(60cmH2O)

PIP: @5~15LPM 0.2~5.7kPa(2~57cmH2O)

PEEP: @5~15LPM 0.03~2.3kPa(0.3~23cmH2O)

Working noise: ≤≤le;≤55dB(A)

Suggestions for weight range: max.10KG

Work and store limit: -20ºCordm;Cordm;C~50ºCordm;Cordm;C, relative humidity up to 90%

Work hours(400L gas cylinder): @8LPM /50mins

Quality certification: ISO 13485