JMY609，基于恩智浦PCD，是读写模块。 根据ISO14443A，ISO14443B该模块支持系列IC卡和仿USB键盘读取和输出卡的数据。 JMY609是带USB接口的JMY609，基于恩智浦PCD读写模块，是读写模块。 根据ISO14443A，ISO14443B该模块支持系列IC卡和仿USB键盘读取和输出卡的数据。 JMY609是带USB接口的JMY609，基于恩智浦PCD读写模块，是读写模块。 根据ISO14443A，ISO14443B该模块支持系列IC卡和仿USB键盘读取和输出卡的数据。 JMY609是带USB接口的JMY609，基于恩智浦PCD读写模块，是读写模块。 根据ISO14443A，ISO14443B该模块支持系列IC卡和仿USB键盘读取和输出卡的数据。 JMY609是带USB接口（HID标准）读写器模块。 在Windows，Linux等PC系统支持USB键盘的系统，模块仿USB键盘来操作卡的数据。 与我们的软件和DIP开关，用户可以设置读者如果读取卡片的数目或卡或二者的数据。 和数据可以是正序或输出是相反的顺序输出。 同时，用户可以自由选择的数目的输出和卡的数据后的密钥输出诸如输入，标签等。 该JMY609的默认值是在出厂设置配置模式。 如果你想要让读者工作中，你需要通过软件和输入cofigurate它的配置信息给读者。 有2个SAM卡插槽，在读卡器。 如果用户需要读取SAM卡和使用SAM与操作进行合作，然后你就可以与我们联系，我们会帮你做的工作。

JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard to read and output the card data. JMY609 is reader module with USB interface (HID standard) . In the systems of Windows, Linux and other PC systems support USB keyboard, the module imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab etc. after the output of the number and the data of the card. The default of the JMY609 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader. There are 2 SAM card slots in the reader. If the users need read the SAM card and use the SAM to cooperate with the operation, and then you can contact us, we will help you do the job.