RS232C HF rfid R\W module, 50ohm antenna, NXP RC632 RC531 chips
RS232C高频RFID R / W模块，50欧姆天线，NXP RC632 RC531芯片
JMY612系列与RS232C串行端口RFID读/写模块。 JMY612具有各种功能，并支持非接触式卡的多ISO / IEC标准; 卡从不同的供应商。 设计师结合射频卡的一些频繁使用的命令，然后用户可以通过RS232C接口发送简单的命令模块运行全功能卡。 和模块和天线是分开设计。 射频模块和天线之间的阻抗是由调谐阻抗分析仪。 然后模块具有优异的性能和稳定性。 模块和天线由50欧姆同轴线路相连。 表现还是不错的，虽然线可以达到10米。 通常情况下，导线应60厘米是模块的最佳性能和稳定性。
资格：
•PCD：NXP RC531
•工作频率：13.56MHz的
•RF标准：ISO14443A，ISO14443B
•防冲突能力：全功能防碰撞; 能够同时处理多张卡; 可以设置只操作单卡
•自动寻卡：支持，默认开启
•SAM卡插槽：4个插槽，9600-115200
•EEPROM：512字节
•接口：RS-232C
•通信速率：19200-115200bps
•Max.command长度：1024字节
•接口级别：3.3 V（TTL电平; 5V容忍）
•电源：DC 5.0V
•功耗：150毫安
•尺寸：80毫米*60毫米*12毫米
•重量：约50g
•工作温度：-25〜+ 85℃（-77〜+ 185°F）
•储存温度：-40〜+ 125℃（-104〜+ 257°F）
•ISP：支持
•RoHS：合规
•SDK开发及程序：下载
•手动：下载
| 型号。 | JMY612C | ||||||||||||||||||||||
| 手册 | 下载 | ||||||||||||||||||||||
| 尺寸 | 80毫米*60毫米*12毫米 | ||||||||||||||||||||||
| 接口 | RS232C | ||||||||||||||||||||||
| 通讯命令长度 | 1024字节 | ||||||||||||||||||||||
| 天线连接 | 50欧姆同轴电缆线 | ||||||||||||||||||||||
| PCD | RC531 | ||||||||||||||||||||||
| SAM卡槽 | 4 | ||||||||||||||||||||||
| RF标准 |
| ||||||||||||||||||||||
| 读写距离 | 百毫米 | ||||||||||||||||||||||
| 人保财险 |
|
JMY612 series are RFID reader/ writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/ IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through RS232C interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
Qualifications:
• PCD: NXP RC531
• Working frequency: 13.56MHz
• RF standard: ISO14443A, ISO14443B
• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
• Auto detecting card: Supported, default ON
• SAM card slot: 4 slots, 9600bps-115200bps
• EEPROM: 512 Bytes
• Interface: RS232C
• Communication rate: 19200-115200bps
• Max.command length: 1024 Bytes
• Interface level: 3.3V (TTL level; 5V tolerance)
• Power supply: DC 5.0V
• Power consumption: 150mA
• Dimension: 80mm*60mm*12mm
• Weight: about 50g
• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
• ISP: Supported
• RoHS: Compliant
• SDK&Program: Download
• Manual: download
| Model NO. | JMY612C | ||||||||||||||||||||||
| Manual | Download | ||||||||||||||||||||||
| Dimension | 80mm*60mm*12mm | ||||||||||||||||||||||
| Interface | RS232C | ||||||||||||||||||||||
| Communication Command Length | 1024 Bytes | ||||||||||||||||||||||
| Antenna connection | 50ohm coaxial line | ||||||||||||||||||||||
| PCD | RC531 | ||||||||||||||||||||||
| SAM card slot | 4 | ||||||||||||||||||||||
| RF Standard |
| ||||||||||||||||||||||
| Reading distance | 100mm | ||||||||||||||||||||||
| PICC |
|
