JMY622系列与UART和IIC串行端口13.56MHz的RFID读/写器模块。 该模块将符合EMV2000，EMV2010和PBOC 2.0标准。 且模块和天线由50欧姆同轴线路相连。 射频模块和天线之间的阻抗是由调谐阻抗分析仪; 所以该模块具有优异的读/写性能和稳定性。 虽然线可以达到10M，但性能还是不错的。 通常情况下，导线应60厘米是模块的最佳性能和稳定性。 JMY622采用表面贴装安装形式。 小尺寸JMY622的一大特色。 JMY622有多种funtions的，它可以根据国际标准，支持各种非接触式IC卡。 同时它可以从不同的供应商支持的卡。 设计师分类与集成非接触式IC卡的操作命令。 在这种情况下，UESR可以通过发送简单的指令很容易地操作它。 对于JMY622最​​重要的特点是，它可以支持非接触式IC cardsJMY622系列与UART和IIC串行端口13.56MHz的RFID读/写模块。 该模块将符合EMV2000，EMV2010和PBOC 2.0标准。 且模块和天线由50欧姆同轴线路相连。 射频模块和天线之间的阻抗是由调谐阻抗分析仪; 所以该模块具有优异的读/写性能和稳定性。 虽然线可以达到10M，但性能还是不错的。 通常情况下，导线应60厘米是模块的最佳性能和稳定性。 JMY622采用表面贴装安装形式。 小尺寸JMY622的一大特色。 JMY622有多种funtions的，它可以根据国际标准，支持各种非接触式IC卡。 同时它可以从不同的供应商支持的卡。 设计师分类与集成非接触式IC卡的操作命令。 在这种情况下，UESR可以通过发送简单的指令很容易地操作它。 对于JMY622最​​重要的特点是，它可以支持非接触式IC卡

JMY622 series are 13.56MHz RFID reader/ writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/ write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY622 adopts surface mount installation form. Small size is a major feature of JMY622. JMY622 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY622 is that it can support contactless IC cardsJMY622 series are 13.56MHz RFID reader/ writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/ write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY622 adopts surface mount installation form. Small size is a major feature of JMY622. JMY622 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY622 is that it can support contactless IC cards