JMY608，基于恩智浦SL RC400，是读写模块。 根据ISO15693的模块支持系列IC卡，并模仿USB键盘读取和输出的名片数据。 JMY608是带USB接口的JMY608，基于恩智浦SL RC400读写模块，是读写模块。 根据ISO15693的模块支持系列IC卡，并模仿USB键盘读取和输出的名片数据。 JMY608是带USB接口的JMY608，基于恩智浦SL RC400读写模块，是读写模块。 根据ISO15693的模块支持系列IC卡，并模仿USB键盘读取和输出的名片数据。 JMY608是带USB接口的JMY608，基于恩智浦SL RC400读写模块，是读写模块。 根据ISO15693的模块支持系列IC卡，并模仿USB键盘读取和输出的名片数据。 JMY608是带USB接口（HID标准）读写器模块。 在Windows，Linux等PC系统支持USB键盘的系统，读者模仿USB键盘来操作卡的数据。 与我们的软件和DIP开关，用户可以设置读者如果读取卡片的数目或卡或二者的数据。 和数据可以是正序或输出是相反的顺序输出。 同时，用户可以自由地选择，例如数的输出和卡的数据后进入，标签等的密钥输出。 该JMY608的默认值是在出厂设置配置模式。 如果你想要让读者工作中，你需要通过软件和输入cofigurate它的配置信息给读者。

JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface (HID standard) . In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab and so on after the output of the number and the data of the card. The default of the JMY608 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader.