HIM（本田与阿库拉诊断系统）是本田汽车最新的诊断设备。 适用于本田/讴歌汽车诊断功能从1992年to2007。 测试范围：动力，车身，底盘，ABS，SRS，防盗等，支持CAN总线系统，它可以重新编程自动ECU。 这HIM是基于PC的操作平台。 使用非常简单。
描述：
HIM（本田与阿库拉诊断系统）是本田汽车最新的诊断设备。 适用于本田/讴歌汽车诊断功能从1992年to2007。 测试范围：动力，车身，底盘，ABS，SRS，防盗等，支持CAN总线系统，它可以重新编程自动ECU。 这HIM是基于PC的操作平台。 使用非常简单。

本田/讴歌协议支持功能：
从控制块内存读取和解码故障代码;
删除故障码;
显示系统以数字形式电流参数;
显示系统？ 图形形式的电流的参数;
合并显示的数据;
执行设备的管理;
日志保存 - 书写和保存在内存中的数字参数;
特殊功能 - 改变块允许设置，编程等。

通过OBD-II协议支持功能：
模式$ 01 - 显示系统当前的参数，以数字形式（最多8个参数在一次）;
模式$ 02 - 冻结帧的显示参数;
模式$ 03 - 阅读和从控制模块故障码解码？ 记忆;
模式$ 04 - 删除故障代码（内存清除）;
模式$ 05 - 氧传感器的显示效果;
模式$ 06 - 的可转换控制系统和部件的显示效果;
模式$ 07 - 不断控制系统和部件的显示效果;
模式$ 08 - 行政设备的管理;
模式$ 09 - 显示的车号识别信息。

硬件和软件要求：
PC或笔记本电脑与Windows 2000专业版（SP4或更高版本）或XP（SP1或更高版本）。 硬盘驱动器与至少400MB的自由空间
CD-ROM驱动器（如果高速互联网连接不可用）
需要RS232口连接PC给他（PC版软件只）
显示器能够显示在VGA模式或以上（1024×768推荐）的
互联网连接（高速推荐的连接）

包，包括：
1个x HIM与OBDII电缆
1个倍速​​DVD
1个×3针电缆
1个个RS232电缆

HIM (Honda & Acura Diagnostic System) is the latest diagnostic equipment for Honda vehicles. Diagnostic functions available for vehicles of HONDA/ ACURA from year 1992 to2007. Test coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc. It supports CAN BUS system, and it can re-program the Auto ECU. This HIM is based on PC operation platform. Very easy to use.
Description:
HIM (Honda & Acura Diagnostic System) is the latest diagnostic equipment for Honda vehicles. Diagnostic functions available for vehicles of HONDA/ ACURA from year 1992 to2007. Test coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc. It supports CAN BUS system, and it can re-program the Auto ECU. This HIM is based on PC operation platform. Very easy to use.

Functions supported by Honda/ Acura protocols:
Reading and decoding fault codes from control blocks memory;
Deleting fault codes;
Displays system current parameters in digital form;
Displays system? current parameters in graphical form;
Combined displaying of data;
Management of executive devices;
Logs keeping - writing and keeping of digital parameters in memory;
Special functions - changing of permissible settings of blocks, programming etc.

Functions supported by OBD-II protocols:
Mode $01 - Displays system current parameters in digital form (up to 8 parameters at once) ;
Mode $02 - Displays parameters of freeze frame;
Mode $03 - Reading and decoding of fault codes from control block? memory;
Mode $04 - Deleting of fault codes (memory clearing) ;
Mode $05 - Displays results of oxygen sensors;
Mode $06 - Displays results of changeably controlled systems and components;
Mode $07 - Displays results of constantly controlled systems and components;
Mode $08 - Management of executive devices;
Mode $09 - Displays car identification info.

Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later) . Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to HIM (PC version software only)
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Internet connection (high-speed connection recommended)

Package Including:
1pc x HIM with OBDII Cable
1pc x DVD
1pc x 3 Pin Cable
1pc x RS232 Cable