1.我们的车标激光isspecially专为汽车改装发烧友; 我们的目的带来更多的驾驶乐趣的驱动程序;

2.炫标志灯将显示，当你打开车门的地上，将关闭在关闭的门
3。 大幅减少，加热生成
4.高抗冲击的能力; 耀眼的光芒; 低温。
5.超级白光照明提供夜间驾驶高水平的道路安全。
6.它可以安装在左侧和右侧门。 礼貌门灯让您的爱车美观而且大气。

7.纯色与漂亮的外观。

制作安装：

本品应在门口火焰底部安装，并确保莱恩与地面垂直

1.拉下车门内板第一。 标记合适的位置钻一个洞。

2.钻在门板与我们的蛀虫孔。

3.插图来自汽车车门底部的产品，然后安排电源线。

4.通过安装在内部的孔电源线螺母; 拧紧螺母。

5.根据安装指南连接电源线

6.调节灯泡投影到合适的地方用扳手。

1. Our car logo laser light isspecially designed for auto modification fancier; we purpose to bring more driving fun to drivers;

2. The dazzle logo light will display on the ground when you open the car door , and will turn off when you close the door
3. . Major Reduction in. Heat Generation
4. High ability of shock resistant; Brighter light; Low temperature.
5. Super white lighting provides a high level of road safety at night driving.
6. It can be installed in both left and right door. Courtesy door light make your car artistic moreover the atmosphere.

7. Pure color with nice appearance.

Installtion:

This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground

1. Pull down the inside door board first. Mark the suitable location for drilling a hole.

2. Drill the hole on the door board with our borer .

3. Inset the product from the bottom of car door , then arrange the power cord.

4. Install the nut through the power cord upon the hole inside; Tighten the nut.

5. Connect the power cord according to the installation guide

6. Adjust the lamp projection to the suitable place with wrench.