此LED灯可程序自动在车门打开的时候。

Outpower：3W

电压：12V / 24V

工作温度：-40度〜105度

材质：铝合金外壳

使用寿命：30000-50000小时

标志可用：

福特，起亚，奥迪，保时捷，奔驰，大众，本田，标致，别克，丰田，雷克萨斯，铃木，马自达，日产，三菱。

现代，雪佛兰，雪铁龙，宝马，和等。

安装：

这种LED灯可以在门的底部flameand确保莱恩与地面垂直安装;

1.拉下车门内板第一。 标记合适的locationfor钻孔。

2.钻在门板与我们的蛀虫孔。

3.插图从轿厢门的底部产物，然后安排thepower线。

4.通过安装在内部的孔电源线螺母; 拧紧螺母;

5.根据安装指南连接电源线;

6.调节灯泡投影到合适的地方用wrenchtool。

7.重新安装内部门板，然后检查的最终效果。

This LED Lights can be automaticlly on when car doors open.

Outpower: 3W

Voltage: 12V/ 24V

Working Temp: -40 degrees~ 105 degrees

Material: Aluminium alloy casing

Life span: 30000-50000 hours

Logo Available:

FORD, KIA, AUDI, PORSCHE, BENZ, VW, HONDA, PEUGEOT, BUICK, TOYOTA, LEXUS, SUZUKI, MAZDA, NISSAN, MITSUBISHI.

HYUNDAI, CHEVROLET, CITROEN, BMW, and ect.

Installation:

This LED lights can be installed at the bottom of the door flameand make sure the Len vertical with the ground ;

1. Pull down the inside door board first. Mark the suitable locationfor drilling a hole.

2. Drill the hole on the door board with our borer .

3. Inset the product from the bottom of car door , then arrange thepower cord.

4. Install the nut through the power cord upon the hole inside; Tighten the nut;

5. Connect the power cord according to the installation guide;

6. Adjust the lamp projection to the suitable place with wrenchtool.

7. Reinstall the inside door board, then check the final effect.