Speednt 10g switch mpls 48 port gigabit switch
Speednt万兆交换机MPLS 48口千兆交换机
议价
加入意向快速详细信息
| 产品状态： | 股票 | 端口： | ≥ 48 | 传输速率： | 10/100 / 1000Mbps的 |
| 功能： | LACP，服务质量，SNMP，VLAN支持 | 通讯模式： | 全双工和半双工 | 认证： | CE，FCC，ROSH |
| 开关容量： | 176Gbps | 品牌： | Speednt | 型号： | UK5704-52TC |
| 原始地点： | 广东省，中国（大陆） | 产品名： | Speednt万兆交换机MPLS 48口千兆交换机 | 固定端口： | 48 1G电口，4个1G组合端口和2个集成10G端口 |
| 扩展端口： | 2可扩展的万兆端口 | 背板带宽： | 176Gbps | 包转发率： | 130.944Mpps |
| 处理器： | RISC 400MHz的 | 闪存容量： | 8MB | 存储容量： | 128MB |
| 地址表： | 32K |
包装及送货
| 包装细节： | 标准包装：1片/箱或者中性包装，定制包装 Speednt万兆交换机MPLS 48口千兆交换机 |
| 交货详细信息： | 5-7个工作日 |
Speednt万兆交换机MPLS 48口千兆交换机
CE，FCC，ROHS认证
产品描述
产品型号 | UK5704-52TC |
基本特点 | |
固定端口 | 44个10/100 / 1000M RJ45端口，4个千兆Combo口，以及4个10GE SFP +端口（2个集成的万兆以太网端口，2个扩展10GE端口） |
背板带宽 | 176Gbps |
包转发率 | 130.944Mpps |
处理器 | RISC 600MHz的 |
闪存容量 | 8MB |
内存容量 | 64MB，最大512MB |
地址表 | 32K |
队列缓冲区 | 64MB |
产品特点 | |
生成树 | 支持STP，RSTP，MSTP 支持PVST / PVST + |
VLAN | 支持基于端口的VLAN 支持基于MAC地址的VLAN 支持802.1Q标记的VLAN 支持超级VLAN 支持专用VLAN 支持的GVRP动态VLAN配置 支持灵活QinQ和灵活QinQ功能 支持语音VLAN |
流量控制 | 基于标准的IEEE 802.3x流量控制 使用IEEE 802.1Qbb优先级控制流程 支持CAR功能 |
广播控制 | 抑制广播风暴，达到临界点停止发送 |
组播控制 | IGMP Snooping组播包自动监控 |
组播路由 | IGMP V1 / V2 / V3，MLDv2版本 PIM-SM，OLINK和PIM-DM DVMRP（距离矢量组播路由协议） GMRP（组播动态注册协议） |
端口绑定 | 每组最多8，而supporting128组 LACP动态或静态聚合 |
端口镜像 | 支持流分类为基础的镜像 支持端口镜像 |
堆积 | 硬堆16，软堆栈32 使用统一的IP地址进行集中管理，节省地址资源 |
路由管理 | 静态路由 RIP V1 / V2，OSPFv2中，BEIGRP，BGPv4，ISIS，BGP（与思科EIGRP兼容） 反病毒智能路由功能 |
策略路由 | 支持基于IP的策略路由 |
代理功能 | 支持ARP代理，DNS代理 |
冗余备份 | 支持VRRP，HSRP热备份路由器协议 |
DHCP的特点 | DHCP服务器，DHCP客户端和支持DHCP中继 |
NAT功能 | 支持静态或动态NAT地址转换功能 |
安全特性 | IEEE 802.1x端口认证，PKI认证 端口安全（端口安全）功能 对于IP ACL访问控制列表ACL，MAC，VLAN的硬件支持 基于端口的用户IP + MAC + VLAN ID +用户的硬件支持占各种因素捆绑 支持IP Source Guard功能 支持WEB界面用户认证 远程RADIUS，TACACS +认证 用户分级管理和口令保护 网盾技术 安全控制技术 政策控制列表 |
服务质量 | IEEE 802.1Qau拥塞机制 每个端口8发送队列映射802.1p优先级8个优先级 WRED，WFQ，SP和FIFO队列调度算法 尽力而为的服务 区分服务 严格优先级 加权轮循 先到先得 TOS标记 RTS |
网管 | SNMP V1 / V2 / V3 RMON（1239组） 远程登录 WEB界面 支持集群管理 支持SSH 支持PDP（与Cisco CDP兼容）。 为了支持风扇，温度，系统日志，分级报警 |
物理特性 | |
外观尺寸 | 440毫米*280毫米*44毫米 |
电源特性 | AC 110-240V自适应，47-63Hz的，1A / 230V，RPS电源热备份 |
功率 | 80W |
指示符 | 电源指示，系统指示，连接/收发器指令 |
环境湿度 温度 | 0-50℃运行，-40-70℃保存，0-90％无凝结 |
认证
联系
李亚男文
深圳市速科技有限公司
HTTP：//en.speednt.com
HTTP：//speednt.en.alibaba.com/
手机：+86 1501 3636 112
微信：+86 1501 3636 112
Whatapp：+86 1501 3636 112
SKYPE：wen.leanne
Quick Details
| Products Status: | Stock | Ports: | ≥ 48 | Transmission Rate: | 10/100/1000Mbps |
| Function: | LACP, QoS, SNMP, VLAN Support | Communication Mode: | Full-Duplex & Half-Duplex | Certification: | CE, FCC, ROSH |
| Switch Capacity: | 176Gbps | Brand Name: | Speednt | Model Number: | UK5704-52TC |
| Place of Origin: | Guangdong, China (Mainland) | product name: | Speednt 10g switch mpls 48 port gigabit switch | Fixed port: | 48 1G electrical ports, 4 1G combo ports, and 2 integrated 10G ports |
| Extensible port: | 2 extensible 10G ports | Backplane bandwidth: | 176Gbps | Packet forwarding rate: | 130.944Mpps |
| Processor: | RISC 400MHz | Flash memory capacity: | 8MB | The memory capacity: | 128MB |
| Address table: | 32K |
Packaging & Delivery
| Packaging Details: | Standard package: 1piece/ carton Or Neutral packing, Customized packing Speednt 10g switch mpls 48 port gigabit switch |
| Delivery Detail: | 5-7 working days |
Speednt 10g switch mpls 48 port gigabit switch
CE, FCC, ROHS Certificate
Product Description
The product model | UK5704-52TC |
Basic characteristics | |
Fixed port | 44 10/100/1000M RJ45 ports, 4 1000M combo ports, and 4 10GE SFP+ ports (2 integrated 10GE ports, 2 extensible 10GE ports) |
The backplane bandwidth | 176Gbps |
Packet forwarding rate | 130.944Mpps |
Processor | RISC 600MHz |
Flash memory capacity | 8MB |
The memory capacity | 64MB, maximum 512MB |
Address table | 32K |
Queue buffer | 64MB |
Product characteristics | |
Spanning tree | Support STP, RSTP, MSTP Support PVST/ PVST+ |
VLAN | Support port-based VLAN Support MAC-based VLAN Support 802.1Q labeled VLAN Support for Super VLAN Support for Private VLAN Support for the GVRP dynamic VLAN configuration Support QinQ and flexible QinQ Support for Voice VLAN |
Flow control | Standard-based IEEE 802.3x flow control Using IEEE 802.1Qbb priority control flow Support CAR function |
Broadcast control | Suppress broadcast storms, reaches a critical point to stop sending |
multicast control | IGMP Snooping multicast packet automatically monitoring |
multicast routing | IGMP v1/ v2/ v3, MLDv2 PIM-SM, OLINK&PIM-DM DVMRP (Distance Vector Multicast Routing Protocol) GMRP (multicast dynamic registration protocol) |
Port binding | Each set of up to 8, while supporting128 group LACP dynamic or static aggregation |
Port mirroring | Support flow classification-based mirroring Support port mirroring |
Stacked | The hard stack 16, soft stack 32 Using a unified IP address to carry on centralized management to save address resources |
Routing management | Static routing RIP v1/ v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP) , BGPv4, ISIS, BGP Anti-virus intelligent routing function |
Strategy routing | Support IP -based strategy routing |
The proxy function | Support Proxy ARP, DNS Proxy |
Redundancy backup | Support for VRRP, HSRP Hot Standby Router Protocol |
Characteristics of DHCP | DHCP Server, DHCP Client and support DHCP relay |
Function of NAT | Support the static or dynamic NAT address translation function |
Safety characteristics | IEEE 802.1x port certification, PKI certification Port Security (Port Security) function Hardware support for IP ACL ACL ACL, MAC, VLAN Hardware support for port-based user IP+MAC+VLAN ID+ user account a variety of factors bundling Support IP Source Guard Support WEB interface user authentication Remote RADIUS, TACACS+ certification User classification management and password protection Net shield technology Safety control technology Policy control list |
Quality of service | IEEE 802.1Qau congestion mechanism Each port 8 send queue mapping 802.1p 8 priority WRED, WFQ, SP and FIFO queue scheduling algorithm Best-Effort Service Differentiated Service Strict Priority Weighted Round Robin First come first served TOS to mark RTS |
Network management | SNMP v1/ v2/ v3 RMON (1239 group) Telnet WEB interface Support for cluster management Support SSH Support for PDP (compatible with Cisco CDP.) To support the fan, temperature, system log, hierarchical alarm |
Physical characteristics | |
Appearance size | 440mm * 280mm * 44mm |
Power characteristic | AC 110-240V adaptive, 47-63Hz, 1A/ 230V, RPS power hot backup |
Power | 80W |
Indicator | Power indication, system instruction, connecting / transceiver instructions |
Environment humidity Temperature | 0-50 ℃ operation, -40-70 ℃ preservation, 0-90% no condensation |
Certifications
Contact
Leanne Wen
Shenzhen Speed Technology Co. Ltd
http: //en.speednt.com
http: //speednt.en.alibaba.com/
Cell: +86 1501 3636 112
WeChat: +86 1501 3636 112
Whatapp: +86 1501 3636 112
SKYPE: wen.leanne
