主要规格

双分组枪，也被称为双头喷枪，包括两个圆形或扇形液体雾化帽喷射主压头，双组分材料主要用于注射，双色喷塑，纳米喷涂，激光彩色和高精度 电子行业。 扇形并根据不同的使用环境圆形液体雾化帽被选中。 枪可以是不同的粘度按照喷射流，单独调节喷射角度，压力，雾化和流速。 空气管路（压力控制和物理和化学品的使用）桶，直接注射头。 同时，原料入口和调节装置分开设计在喷嘴口部，气体 - 液体导管进入每个喷嘴，均匀的压力，以液体和气体通过一个独立发控制。 我们的枪是一种高精度使用的工具。 请之前和使用，使用和最小的桶污染之后保持枪清洁。 为了延长枪的寿命。
八大优势
1绿
2，操作安全
3，适合自动化，批量
4，颜色多样
5可回收
6，可定位喷
7，工件不是的尺寸和形状的限制
8，操作简单

一般应用

1，工艺品表面喷涂
2，手机外壳电镀
3，一个视频表面喷涂
4脚跟表面喷涂
5，喷涂材料表面喷涂
6，所有产品的表面处理
1，基于所选择的流体粘度和我们喷雾产品，枪的口径可以选择为直径为0.5至2.0进行选择。
2，喷枪的气帽，可以选择圆形和风扇。 圆角一般为15°时，风扇盖的角度一般为45°，60°和90°，而不具有局部作用在安装过程中风扇喷嘴喷枪，可安装在空气压缩机可以暴露于任何 一个位置。
1，大小：135毫米X 66毫米×120毫米
2，重量：约490克
3，额定压力为5巴/分钟
4，枪体：进口阳极氧化铝材料
5，喷嘴/液取：316不锈钢
6，喷嘴调节器：316不锈钢

颜色：蓝色

Key Specification

Double grouping gun, also known as double head spray gun, consists of two circular or fan-shaped liquid atomization cap injection main head, two-component material mainly used for injection, two-color spray, nano-spraying, laser color and high precision electronics industry . Fan-shaped and circular liquid atomization cap is selected depending on the use environment. The gun can be of different viscosity in accordance with the jet stream, individually adjustable injection angle, pressure, atomization and flow rate. Air line (pressure control and physical and chemical use) Barrel, direct injection head. Meanwhile, the raw material inlet and the adjustment means designed in the nozzle mouth portion, the gas-liquid conduit separately into each nozzle, uniform pressure to the control of liquids and gases by an independence hair. Our gun is a high precision use tools. Please keep the gun clean before and after use and use and minimal Barrel pollution. In order to prolong the life of the gun.
Eight advantages
1 green
2, operating safety
3, suitable for automation, batch
4, color diversity
5 recyclable
6, can be positioned spraying
7, the workpiece is not the limit of the size and shape of the
8, the operation is simple

General application

1, handicrafts surface spraying
2, mobile phone shell plating
3, a video surface spraying
4 heel surface spraying
5, spray material surface spraying
6, the surface treatment of all products
1, based on the selected fluid viscosity and we spray products, the caliber of the gun can choose as diameter 0.5 to 2.0 selectable.
2, the air cap of the spray gun can be selected circular and fan. The round angle is generally 15 °, the angle of the fan cap is generally 45 °, 60 ° and 90 ° of the fan nozzle spray gun during the installation without a local effect, can be installed in the air compressor can be exposed to any one location.
1, size: 135 mm x 66 mm x 120 mm
2, weight: about 490 g
3, rated pressure 5 Bar/ Min
4, the gun body: import anodic alumina materials
5, nozzle/ liquid take: 316 stainless steel
6, nozzle regulator: 316 stainless steel

color: blue