25 to 200MHz Digital Storage Oscilloscope with FFT Analysis, USB Interface

25 to 200MHz Digital Storage Oscilloscope with FFT Analysis, USB Interface

25至200MHz数字存储示波器，带FFT分析，USB接口

议价

加入意向
  • 特征：
    • 2个垂直通道和高分辨率彩色或B / W LCD显示屏（320 x 240像素）
    • 主/延时双时基扫描，时间缩放
    • 自动测量20个参数和双光标V，T，1 / Ton屏幕读数
    • 10组波形和设置存储
    • 边沿，视频和脉冲触发
    • 波形数学和FFT分析
    • 波形记录和回调
    • 数字低，高，带通和带阻滤波器
    • 支持USB存储
    • 设计优雅，体积小巧，携带方便
  • 技术规格：
    • 带宽：25,40,60,100,150和200MHz
    • 实际采样率：250MSa / s（JC-1000系列）或1GSa / s（JC-1000A系列）
    • 最大等效采样率：50GSa / s
    • 通道：CH1，CH2和独立ADC
    • 存储器深度：每通道高达4kB
    • 垂直灵敏度：2m至5V / div
    • 垂直分辨率：8位
    • 上升时间：≤14,8.8,5.8,3.5,2.3和1.8ns
    • 输入阻抗：1MΩ/ 13pF
    • 输入耦合：DC，AC和GND
    • 时基：双，20，5，2，1ns至50s / div
    • 触发模式：自动，正常和单次
    • 触发类型：边沿，电视，脉冲和延迟
    • 光标测量模式：手动，跟踪和自动
    • 光标测量：V，T和1 / T
    • 自动测量：Vpp，Vmax，Vmin，Vtop，Vbase，Vamp，Vavg，Vrms，过冲，前冲，频率，上升时间，下降时间，周期，
    • 波形数学：+， - ，x，/，相位反转和FFT
    • FFT：1024p（汉宁，汉明，布莱克曼和矩形）
    • 存储：10个波形和10个设置
    • X到Y模式：直流到全带宽，相位误差≤3°
    • 校准信号：1kHz方波，3.0Vpp

  • Features:
    • 2 vertical channels and high resolution color or B/W LCDdisplay (320 x 240 pixels)
    • Main/delay dual time-base sweep, time zoom
    • Auto measurement of 20 parameters and dual cursor V, T, 1/Ton-screen readout
    • 10 groups of waveform and setting storage
    • Edge, video and pulse triggers
    • Waveform maths and FFT analysis
    • Waveform record and recall
    • Digital low, high, band-pass and band-stop filters
    • Supports USB storage
    • Elegant design, compact size and easy to carry
  • Technical Specifications:
    • Bandwidth: 25, 40, 60, 100, 150 and 200MHz
    • Real sampling rate: 250MSa/s (JC-1000 series), or 1GSa/s(JC-1000A series)
    • Maximum equivalent sampling rate: 50GSa/s
    • Channel: CH1, CH2 and independent ADC
    • Memory depth: up to 4kB per channel
    • Vertical sensitivity: 2m to 5V/div
    • Vertical resolution: 8 bit
    • Rise time: ≤14, 8.8, 5.8, 3.5, 2.3 and 1.8ns
    • Input impedance: 1MΩ/13pF
    • Input coupling: DC, AC and GND
    • Time base: dual, 20, 5, 2, 1ns to 50s/div
    • Trig mode: auto, normal and single time
    • Trig type: edge, TV, pulse and delay
    • Cursor measure mode: manual, trace and auto
    • Cursor measurement: V, T and 1/T
    • Auto measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg,Vrms, overshoot, Preshoot, frequency, risetime, falltime, period,±width, ±duty, delay A and B
    • Waveform math: +, -, x, /, phase reverse and FFT
    • FFT: 1024p (hanning, hamming, Blackman and rectangle)
    • Storage: 10 waveforms and 10 setups
    • X to Y mode: DC to full bandwidth and phase error≤3°
    • Calibration signal: 1kHz square, 3.0Vpp