TrustFire D007大黄蜂2000 LM 3模式CREE XM-L T6及红外激光LED无线遥控自行车LED头灯(黑色)

| 特征 | |
| 智能数字电路控制 真空电镀反光杯,耐高温,抗摔 可固定在自行车上下班的自行车LED灯 配备有弹性甲板和可应用于各种型号的自行车,容易拆卸和改变 红外线激光可以算出作为娱乐工具和远程性能,也可以用作光SOS必要时 注意: 在安全的地方充电 不要取出电池,否则会影响到产品的性能 请仔细阅读操作手册和以下的警告和建议,以确保使用安全 不要把火炬上的无人值守 不要让孩子玩,或者使用手电筒 不要直接火炬的眼镜在阳光下 使用前请检查电池 请取出电池,储存或运输 用软布清洁电筒线程,每半年,并使用硅油润滑 不要敞口水的O型圈,以油石油精炼。 O型圈会造成水害 | |
| 一般规格 | |
| 牌子 | TrustFire |
| 模型 | D007大黄蜂 |
| LED类型 | CREE XM-L T6 LED +激光红外LED |
| LED数量 | 2个CREE XM-L T6 LED灯 2×红外激光LED灯 |
| 亮度 | 高达2000流明 |
| LED使用寿命 | 截至十万小时 |
| 模式 | 3种模式的调光电路和红外激光 高(2000 LM),低(200 LM),频闪(1800 LM) |
| 反射器 | 真空电镀反光杯 |
| 外壳材料 | 航空铝合金,CNC加工,阳极氧化表面处理 |
| 电池 | 4×18650电池组 |
| 电池配置 | 4400毫安,8.4伏 |
| 工作时间 | 3至4小时(连续使用) |
| 开关 | 无线遥控开关 独立尾部开关,红外激光 |
| 发光角度 | 可调节 |
| Features | |
| Intelligent digital circuit control Vacuum plating reflector cup, high temperature resistance and anti-fall Can be fixed on the bike to work as a bike LED light Equipped with elastic deck and can be applied to various models of bicycles, easy to remove and change Infrared laser can be worked as an entertainment tool with long-range performance, can be also used as SOS light when necessary Note: Charging in safe place Do not remove the battery, or it will affect properties of products Please carefully read the operating manual and the following warning and suggestions to ensure safe use Do not turn the torch on unattended Do not let children to play with or use a flashlight Do not direct the torch's glasses to sunlight Please check battery before use Please remove the battery for storage or transportation Use a soft cloth to clean torch thread every six months and use silicone oil for lubrication Do not exposures the water O ring to oil from petroleum refining. O ring will cause water damage | |
| General Specs | |
| Brand | TrustFire |
| Model | D007 Hornet |
| LED Type | CREE XM-L T6 LED + Infrared laser LED |
| LED Number | 2 x CREE XM-L T6 LED lights 2 x Infrared laser LED lights |
| Brightness | Up to 2000 lumens |
| LED Service Life | Up to 100000 hours |
| Modes | 3 modes dimming circuit & infrared laser High (2000 LM) , low (200 LM) , strobe (1800 LM) |
| Reflector | Vacuum plating reflector cup |
| Housing Material | Aviation aluminum alloy, CNC machining, anodic oxidation surface treatment |
| Battery | 4 x 18650 battery pack |
| Battery Configuration | 4400 mAh, 8.4 V |
| Working Hours | 3 to 4 hours (continuously use) |
| Switch | Wireless remote control switch Independent tail switch for infrared laser |
| Lighting Angle | Adjustable |