Left/right rear direction make of reversing camera
Seven-inch TFT LCD reversing monitor with removable sun visor
On-screen menu for all settings: normal/mirror view, reversing image delay, priority of reverse camera, automatic switch on (by reverse gear and/or by direction lights) and built-in CDS sensor for illumination of the control knobs
Aluminum shell waterproof IR color CCD camera (DF-4103*3):
Image type: 1/3-inch color Sharp CCD
Horizontal resolution: 420TVL
Effective pixels:
NTSC: 510 (H) x 492 (V)
PAL: 500 (H) x 582 (V)
Usable illumination: 0 lux (built-in 18pcs IR LED for picture support in the dark)
Free viewing angle: 130°
Waterproof: IP68
Shockproof: 10G
Video output: 1.0Vp-p, 75Ω
Automatic heating below: 10°C
Power supply: 12V DC from reversing monitor
Dimensions: 69 (W) x 43 (H) x 38mm (D) (without mounting)
Seven-inch digital TFT LCD color monitor (SP-728):
Removable sun visor
OSD menu separately set each camera trigger priority
OSD menu separately set each camera reversing image delay time: 0 to 30min
OSD menu separately set each camera mirror/normal image
Manual and automatic switch display mode
Color system: PAL/NTSC (automatic)
Display resolution: 800 (H) x 480 (V) pixels
Support three camera video inputs: 1.0Vp-p, 75Ω
Wide view angle (CR﹥10):
Up/down: 45/65°
Left/right: 65/65°
Brightness: 300cd/m²
Contrast ratio: 500:1
Backlight: single LED
Operating temperatures: -20 to 70°C
Storage temperatures: -30 to 80°C
Free operating voltages: 11 to 32V DC
External dimensions: (L x W x T) 180 x 118 x 38mm (without mounting)
Weight: approximately 379g
Accessories: monitor bracket, 3 x 15m cable, and electrical