Hook to hang some kitchen utensils in the kitchen can be used on the bathroom can hang up the towels, bath rub. There are two installation methods in the use of the product, select the appropriate installation method according to the use of premises.

Installation method:

No bump of places: ceramic tile, glass, stainless steel, plastic surface, freezers, metal coating surface of the smooth hard surface.


Erase stainless steel, tiles, glass surface adhesion surface dust, dirt, grease and other stolen goods, must be installed prior to the adhesive surface completely dry with a clean soft cloth.

The screw cap rotation to release the approximately three laps, turn the sucker will straighten the doll direction to avoid the pick marks to choose the installation location of the suction on the wall.

Hold down the center of the suction cup (doll heads) parts of the downward pressure, force the sucker in the air excluded. (If any air into the lower absorption edge, it is necessary to adopt this method.)

sucker screw cap tight clockwise election.

can slide linked to the location of the installation is complete.

Condition: Brand new

Size: 37cm X 7.5cm X 5cm

Weight: 0.145 Kg

Material: ABS

Colour: as picture

SKU: HQS-G022

Notice: Color of pictures may varies by different monitor setting. All pictures are real stock photos.

成色: 全新

尺寸: 37厘米X 7.5厘米X 5厘米

重量: 0.145 千克

材料: ABS

颜色: 如图片

SKU: HQS-G022

注意: 因显示器设置不同可能导致色差, 但所有图片均来自实物拍摄, 请放心选购.

挂钩在厨房里可以用来挂一些厨具, 放在浴室里使用可以挂上毛巾, 沐浴擦等. 该产品使用时有两种安装方法, 根据使用场所选择合适的安装方法.

安装方法一:

使用场所: 瓷砖, 玻璃, 不锈钢, 塑胶面, 冰柜, 金属涂装面等无凹凸的光滑硬质平面.


1. 用干净软布抹去不锈钢, 瓷砖, 玻璃面等粘着面的灰尘, 污垢, 油脂等赃物, 安装前必须让粘着面完全干燥.

2. 将螺盖旋松开约3圈, 转动吸盘将公仔方向摆正, 避开接痕选好安装位置将吸盘吸附于墙上.

3. 按住吸盘的中心 (公仔头) 部位往下压, 用力把吸盘里的空气排除掉. (如有空气进入会降低吸附力, 所以必须采用这样的方法.)

4. 将吸盘螺盖按顺时针方向选紧.

5. 可以滑动挂钩的位置, 安装完成.