规范：
•部件号：HL-PL / S115G
•说明：私人新模式20W可调光LED PL-T管
•基本尺寸：51（D）x148mm
•材料：铝外壳+乳白色或透明玻璃盖
•基本：GX24D / GX24Q / E26 / E27 / B22可用
•光源：Epistar 0.5W 2835 SMD LED x 24pcs
•输入电压：85-135V AC或195-265V AC，50 / 60Hz，PF> 0.9,0-100％可调光
•功率：20W
•输出通量：1800-2100Lm，100Lm / W
•视角：360°
•CCT：2700K-7000K可用
•cri（ra）：> 80
•更换：PLT-42W节能灯
•设计用于替换筒灯，嵌入式罐，烛台和天花板固定装置中的CFL。
•其他：10W，12W，16W，20W，30W可用
•包装：彩盒

特征：
•类似尺寸和更高流明至CFL，易于更换
•铝制外壳，散热极佳
•过压和过热保护，0-100％可调光
•高通量效率高达100Lm / W
•即时开启，无噪音，无闪光，无紫外线和红外线
•开关周期：≥15,000
•流明维持在6,000小时：≥90％
•工作温度范围：-25°C - 45°C
•长寿命可达50,000小时以上
•三年有限保修
•符合CE，RoHS标准

警告：
•不能用于全封闭灯具
•干燥位置
•不要混淆12V，120V，230V，277V输入电压。
•电子镇流器必须旁路，除非特别生产。

其他：
•请放置标签“此照明设备的未来重新照明需要使用自镇流LED灯。镇流器已经在灯具上的这个夹具旁路。

Specification:
• Part number: HL-PL/S115G
• Description: private new mode 20W dimmable LED PL-T tubes
• Basic size: 51(D)x148mm
• Materials: aluminum housing + milky or clear glass cover
• Base: GX24D/GX24Q/E26/E27/B22 available
• Light source: Epistar 0.5W 2835 SMD LED x 24pcs
• Input voltage: 85-135V AC or 195-265V AC, 50/60Hz, PF﹥0.9, 0-100% dimmable
• Wattage: 20W
• Output flux: 1800-2100Lm, 100Lm/W
• View angle: 360°
• CCT: 2700K-7000K available
• CRI (Ra): ﹥80
• Replace: PLT-42W energy saving lamp
• Designed to replace CFL in downlights, recessed cans, sconces, and ceiling fixtures.
• Others: 10W, 12W, 16W, 20W, 30W available
• Package: color box

Features:
• Similar size and higher lumens to CFL, easy to replace
• Aluminum housing with very good heat dissipation
• Overvoltage and overheating protection, 0-100% dimmable
• High flux efficacy up to 100Lm/W
• Instant on, no noise, no flash, no UV and IR
• Switching cycles: ≥15,000
• Lumens maintenance at 6,000hrs: ≥90%
• Operating temperature range: -25°C - 45°C
• Long life up to more than 50,000 hours
• Three years limited warranty
• Comply with CE,RoHS standards

Caution:
• Can' t be used in fully enclosed luminaires
• Dry location only
• Don't confuse 12V, 120V, 230V, 277V input voltage.
• Electronic ballast must be bypassed, unless special produced.

Others:
• Please put label 'Future re-lamping of this luminaire requires the use of a self-ballasted LED lamp. The ballast has been bypassed in this fixture' on fixtures.