Battery Charger with 90 to 264V AC Input, Maximum Output of 12W, Wall-mount Type
电池充电器，90到264V交流输入，最大输出12W，壁挂式
议价
加入意向- 电池充电器，90〜264V交流输入12W壁挂式
- 特征：
- 适用于电池充电器
- 通用交流输入全量程
- 保护：短路/过载/过电压
- 两个LED负载指示灯
- 反馈CC模式保护
- 产品规格：
- 输入电压：90〜264V AC
- 输入频率：47〜63Hz
- 输入电流：最大0.4A
- 浪涌电流：最大80A（冷启动）
- 效率：≥65％
- 保持时间：标称线路最小10毫秒
- 输出电压：11〜13V DC
- 纹波和噪声：最大2％p-p
- 过载保护：输出额定电流5％，恒流限制
- 耐电压：I / P O / P：3000V AC
- 漏电流：最大0.25mA
- 工作温度范围：-20至40°C
- 存储温度范围：-40至85°C
- 保护：OVP OLP反馈和短路
- 安全标准：IEC / UL / EN60950-1，CB
- EMC标准：（EN55022 CISPR22，FCC第15部分）B类，EN 61000-3-2，EN 61000-3-3，EN 61000-4-2，61000-4-3，61000-4-4，61000-4 -5,61000-4-7,61000-4-8和61000-4-11
- 标准输出：
- 连接器：直流筒插孔
- 电缆长度：UL2468，＃20AWG / 5ft
- 注意：
- Von：无负载时的Vout
- Z =交流进线口类型代码
- z = 8，iec320 c8
- Z = U，US插头
- Z = E，EU插塞
- Z = A，澳大利亚插头
- Z = B，英国插头
- Z = I，可互换插头（IA / IB / IC / IE / IU）
- Z = N，不可分离的电源线类型（NA / NU / NE / NB）
- Battery charger with 90 to 264V AC input 12W wall-mount type
- Features:
- Suitable for battery charger
- Universal AC input full range
- Protections: short-circuit/overload/over-voltage
- Two colored LED loading indicator
- Feedback CC mode protection
- Specifications:
- Input voltage: 90 to 264V AC
- Input frequency: 47 to 63Hz
- Input current: 0.4A maximum
- Inrush current: 80A maximum (cold start)
- Efficiency: ≥65%
- Hold up time: 10 milliseconds minimum at nominal line
- Output voltages: 11 to 13V DC
- Ripple and noise: 2% p-p maximum
- Overload protection: output rated current 5%, constant current limiting
- Dielectric withstand: I/P O/P: 3,000V AC
- Leakage current: 0.25mA maximum
- Operating temperature range: -20 to 40°C
- Storage temperature range: -40 to 85°C
- Protections: OVP OLP feedback and short circuit
- Safety standards: IEC/UL/EN60950-1, CB
- EMC standards: (EN55022 CISPR22, FCC part 15) class B, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, 61000-4-3, 61000-4-4, 61000-4-5, 61000-4-7, 61000-4-8, and 61000-4-11
- Standard output:
- Connector: DC barrel jack
- Cable length: UL2468, #20AWG/5ft
- Note:
- Von: Vout at no load
- Z = AC inlet type code
- Z = 8, IEC320 C8
- Z = U, US plug
- Z = E, EU plug
- Z = A, Australian plug
- Z = B, British plug
- Z = I, Interchangeable plug (IA/IB/IC/IE/IU)
- Z = N, nondetachable power supply cord type (NA/NU/NE/NB)
