规范：
•部件号：HL-BC / S109D1
•说明：9W SMD LED玉米灯
•基本尺寸：50（D）x101mm
•材料：塑料外壳，无盖
•基座：E26 / E27 / B22 / G24D / G24Q / GX23-2 / G23-2
•光源：Epistar 0.2W 2835或5050 SMD LED x 60pcs
•输入电压：85-135V AC或195-265V AC，50 / 60Hz，PF> 0.9,0-100％可调光
•功率：9W
•输出通量：800-950lm，100lm / W
•视角：360°
•CCT：2700K-7000K可用
•cri（ra）：> 80
•更换：18W CFL节能灯
•应用：用于筒灯，凹形罐，烛台和天花板固定装置。
•其他：5W，7W，9 W，13W，20W可用
•包装：彩盒

特征：
•类似尺寸和更高流明至CFL，易于更换
•过压和过热保护，0-100％可调光
•高通量效率高达100Lm / W
•即时开，无噪音，无闪光，无紫外和红外
•开关周期：≥15000
•流明维持在6000小时：≥85％
•工作温度范围：-25 - 45°C
•使用寿命长，可达50,000小时以上
•三年有限保修
•符合CE标准和RoHS指令

警告：
•不要触摸LED顶部，可能损坏（SMD LED是硅胶封装）
•不能用于全封闭灯具
•干燥位置
•不要混淆12V，120V，230V，277V输入电压。
•电子镇流器必须旁路，除非特别生产。

其他：
•请放置标签“此照明设备的未来重新照明需要使用自镇流LED灯。镇流器已经在这个灯具旁路了。在夹具上。

Specification:
• Part number: HL-BC/S109D1
• Description: 9W SMD LED corn lamps
• Basic size: 50(D)x101mm
• Material: plastic housing, no cover
• Base: E26/E27/B22/G24D/G24Q/GX23-2/G23-2 available
• Light source: Epistar 0.2W 2835 or 5050 SMD LED x 60pcs
• Input voltage: 85-135V AC or 195-265V AC, 50/60Hz, PF﹥0.9, 0-100% dimmable
• Wattage: 9W
• Output flux: 800-950lm, 100lm/W
• View angle: 360°
• CCT: 2700K-7000K available
• CRI (Ra): ﹥80
• Replace: 18W CFL energy saving lamp
• Application: for down lights, recessed cans, sconces, and ceiling fixtures.
• Others: 5W, 7W,9 W, 13W, 20W available
• Package: color box

Features:
• Similar size and higher lumens to CFL, easy to replace
• Overvoltage and overheating protection, 0-100% dimmable
• High flux efficacy up to 100Lm/W
• Instant on,No noise, No flash, No UV and IR
• Switching cycles: ≥ 15000
• Lumens maintenance at 6000Hrs.: ≥85%
• Operating temperature range: -25 - 45°C
• Long lifespan, up to more than 50,000 hours
• Three years limited warranty
• Compliant with CE standard and RoHS Directive

Caution:
• Don' t touch LED top, it maybe damaged (SMD LED is silicon gel encapsulation)
• Can' t be used in fully enclosed luminaires
• Dry location only
• Don't confuse 12V, 120V, 230V, 277V input voltage.
• Electronic ballast must be bypassed, unless special produced.

Others:
• Please put label 'Future re-lamping of this luminaire requires the use of a self-ballasted LED lamp. The ballast has been bypassed in this fixture.' on fixture.