TH3159 Additive Package for Diesel Engine Oil

TH3159 Additive Package for Diesel Engine Oil

TH3159复合剂柴油机油

议价

加入意向

描述
TH3159配制用洗涤剂，分散剂，抗氧化剂/缓蚀剂，无灰抗氧化剂和抗磨剂，等柴油机油混合与此包可以在很大程度上降低对发动机的活塞和气缸磨损碳沉积，并具有在烟尘分散，抗氧化性能优良 ，耐腐蚀和抗磨损。 它可以有效地保护发动机，延长发动机使用寿命。

应用

API等级
治疗率（M％）
单级
多级
CF-4
7.7
8.5
以上剂量均按内加法计算。 这个包是适用于制备SAE 30，40，50，10W / 30，兑入组ⅠGroupⅡbase油15W / 40内燃机油，其产品质量符合API标准。

特点

项目
典型值
测试方法
运动粘度，毫米2 /秒，在100oC
60
ASTM D445
闪点（COC），oC
170
ASTM D92
密度，kg /米3 在20oC
报告
ASTM D1298
总碱值，毫克KOH /克
110
ASTM D2896
氮，质量％
0.4
ASTM D3228
锌，质量％
1.01
ASTM D4927
磷，质量％
0.86
ASTM D1091
钙，质量％
3.8
ASTM D4927
硼，质量％
0.06
ASTM D4951
机械杂质，质量％
0.09
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-65oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH3159 is formulated with detergent, dispersant, antioxidant/ corrosion inhibitor, ashless antioxidant and antiwear agent, etc. The diesel engine oil blended with this package can largely reduce carbon deposition on engine piston and cylinder wear, and has excellent performance in soot dispersing, antioxidation, corrosion proof and antiwear. It can effectively protect the engine and prolong the engine service life.

Applications

API grade
Treating rate (m%)
Mono-grade
Multi-grade
CF-4
7.7
8.5
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/ 30, 15W/ 40 internal combustion engine oils blended with GroupⅠand GroupⅡbase oil, and the quality complies with API standard.

Characteristics

Item
Typical value
Test method
Kinematic viscosity, mm2/s, at 100oC
60
ASTM D445
Flash point (COC) ,oC
170
ASTM D92
Density, kg/ m3, at 20oC
Report
ASTM D1298
Total base number, mgKOH/ g
110
ASTM D2896
Nitrogen , mass%
0.4
ASTM D3228
Zinc, mass%
1.01
ASTM D4927
Phosphorus, mass%
0.86
ASTM D1091
Calcium, mass%
3.8
ASTM D4927
Boron, mass%
0.06
ASTM D4951
Mechanical impurities, mass%
0.09
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.