TH6002 Additive Package for Turbine Oil

TH6002 Additive Package for Turbine Oil

TH6002复合剂汽轮机油

议价

加入意向

描述
TH6002配制与各种添加剂如高有效的抗氧化剂和防锈剂。 编制本产品的透平油具有优异的氧化稳定性,抗锈蚀和防腐蚀性能。 它可以用来防止部件从侵蚀并延长汽轮机油的使用寿命。

应用
N32,N46,N68和N100等级的TSA汽轮机油,与GB11120-89的质量符合标准,可以通过添加0.4-0.5%TH6002按照内部除了标准方法制备1-20mg / kg的消泡剂成 高度提取或加氢基础油。

特点

项目
典型值
测试方法
密度,kg /米3 在20oC
报告
ASTM D1298
闪点(COC),oC
100
ASTM D92
运动粘度,毫米2 /秒,在100oC
30
ASTM D445
氮,质量%
0.5
ASTM D3228
机械杂质,质量%
0.08
GB / T511

包装,运输,贮存
1,该软件包是装在200升铁桶。 避免与强氧化剂接触。
2,储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3,包装,标志,运输,贮存及交货验收应符合SH / T0164的要求。

注意事项
1,包装是一种功能性添加剂包,用消泡剂添加应用的。
2,建议的温度为油调合60-75oC.
3,加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH6002 is formulated with a variety of additives such as high effective antioxidant and anti-rusting agent. The turbine oil prepared with this product can possess excellent oxidation stability, anti-rusting and anticorrosion property. It can be used to prevent the components from eroding and prolong the service life of turbine oil.

Applications
The TSA turbine oils of N32, N46, N68 and N100 grades, complying with the quality standard of GB11120-89, can be prepared by adding 0.4-0.5% TH6002 as per the internal addition standard method and 1-20mg/ kg antifoam agent into highly extracted or hydrogenated base oil.

Characteristics

Item
Typical value
Test method
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
100
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
30
ASTM D445
Nitrogen, mass%
0.5
ASTM D3228
Mechanical impurities, mass%
0.08
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.