TH4301 Additive Package for Worm Gear & Worm Oil

TH4301 Additive Package for Worm Gear & Worm Oil

TH4301复合剂的蜗轮蜗杆油

议价

加入意向

描述
TH4301配制与各种添加剂，如质量好的抗磨剂，和高性能抗氧剂等从TH4301中制备的蜗轮油具有抗挤压，抗磨，抗氧化和防锈性能的。

应用
添加合适的反乳化剂入基础油具有不同粘度，并搅拌该混合物彻底60-75的温度下o C.Then，L- CKE蜗轮油，与SH 0094-91的质量标准相符时，可以通过添加1.5-2.0％TH4301通过添加2.5-3.0制备和L- CKE / p蜗轮油可以制成 ％TH4301。

特点

项目
典型值
测试方法
密度，kg /米3 在20oC
报告
ASTM D1298
闪点（COC），oC
102
ASTM D92
运动粘度，毫米2 /秒，在100oC
30
ASTM D445
磷，质量％
0.85
ASTM D1091
硫，质量％
21
ASTM D129
机械杂质，质量％
0.1
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-75oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH4301 is formulated with a variety of additives such as good quality antiwear agent, and high performance antioxidant, etc. The worm gear oil prepared from TH4301 has the properties of anti-extrusion, antiwear, antioxidation and anti-rusting.

Applications
Add suitable demulsifying agent into the base oils with different viscosities, and stir the mixture thoroughly under the temperature of 60-75oC.Then, L-CKE worm gear oil, complying with the quality standard of SH 0094-91, can be prepared by adding 1.5-2.0% TH4301, and L-CKE/ P worm gear oil can be made by adding 2.5-3.0% TH4301.

Characteristics

Item
Typical value
Test method
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
102
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
30
ASTM D445
Phosphorus, mass%
0.85
ASTM D1091
Sulfur, mass%
21
ASTM D129
Mechanical impurities, mass%
0.1
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.