TH5035 Additive Package for Rail Oil
TH5035复合剂的导轨油
议价
加入意向
描述
TH5035配制与各种添加剂，如质量好的抗氧化剂和油性剂的。 从TH5035制备的导轨油具有良好的抗氧化，防腐，防锈，anticreeping功效。
应用
用于混合油轨与各种粘度等级参考用量：2.0〜3.0％。
以上剂量均按内加法计算。 本产品适用于混合与I组和II组油的油。 产品质量符合SH 0361-92标准。
特点
| 项目 | 典型值 | 测试方法 |
| 闪点（COC），oC | 100 | ASTM D92 |
| 运动粘度，毫米2 /秒，在100oC | 12 | ASTM D445 |
| 硫，质量％ | 7.0 | ASTM D129 |
| 机械杂质，质量％ | 0.08 | GB / T511 |
包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。
注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-75oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.
Description
TH5035 is formulated with a variety of additives such as good quality antioxidant and oiliness agents. The rail oil prepared from TH5035 has favorable antioxidation, anticorrosion, antirust and anticreeping efficacies.
Applications
Used for blending rail oils with various viscosity grades The dosage: 2.0-3.0%.
Above treating rates are calculated by addition method. This product is applicable for the oils blended with Group I and Group II oils. The product quality complies with SH 0361-92 standard.
Characteristics
| Item | Typical value | Test method |
| Flash point (COC) ,oC | 100 | ASTM D92 |
| Kinematic viscosity, mm2/s, at 100oC | 12 | ASTM D445 |
| Sulfur, mass% | 7.0 | ASTM D129 |
| Mechanical impurities, mass% | 0.08 | GB/ T511 |
Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.
Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.
