TH3156 Additive Package for Diesel Engine Oil

TH3156 Additive Package for Diesel Engine Oil

TH3156复合剂柴油机油

议价

加入意向

描述
TH3156配制与各种添加剂，如质量好的分散剂，洗涤剂和各种高性能无灰抗氧化剂等从TH3156中制备的柴油发动机油具有良好的高温清净性，抗磨，抗氧化优良，耐腐蚀，和细经济效率的 。

应用

API等级
治疗率（M％）
单级
多级
光盘
4.8
5.2
CC
2.4
2.8
以上剂量均按内加法计算。 这个包是适用于制备SAE 30，40，50，兑入组ⅠGroupⅡbase油10W / 30，15W / 40内燃机油。 其产品质量符合API标准。

特点

项目
典型值
测试方法
闪点（COC），oC
170
ASTM D92
运动粘度，毫米2 /秒，在100oC
45
ASTM D445
总碱值，毫克KOH /克
150
ASTM D2896
硫酸盐灰分，质量％
20
ASTM D874
氮，质量％
0.21
ASTM D3228
锌，质量％
1.52
ASTM D4927
磷，质量％
1.3
ASTM D1091
钙，质量％
5.3
ASTM D4927
机械杂质，质量％
0.1
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-65oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH3156 is formulated with a variety of additives such as good quality dispersant, detergent and a variety of high performance ashless antioxidants, etc. The diesel engine oils prepared from TH3156 has favorable high temperature detergency, antiwear, excellent antioxidation, anticorrosion, and fine economic efficiency.

Applications

API grade
Treating rate (m%)
Mono-grade
Multi-grade
CD
4.8
5.2
CC
2.4
2.8
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/ 30, 15W/ 40 internal combustion engine oils blended with GroupⅠand GroupⅡbase oil. The quality complies with API standard.

Characteristics

Item
Typical value
Test method
Flash point (COC) ,oC
170
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
45
ASTM D445
Total base number, mgKOH/ g
150
ASTM D2896
Sulfate ash, mass%
20
ASTM D874
Nitrogen , mass%
0.21
ASTM D3228
Zinc, mass%
1.52
ASTM D4927
Phosphorus, mass%
1.3
ASTM D1091
Calcium, mass%
5.3
ASTM D4927
Mechanical impurities, mass%
0.1
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.