描述
T161A是从高反应性异丁烯制备的高分子量的无灰分散剂（

= 2300）热加合工艺。 它具有优良的分散性和油泥和烟灰的溶解度的影响; 并且可以有效地控制增加发动机油的粘度。 T161A不含有氯。

特殊功能
•含油污泥优异的低温分散性
•卓越的烟灰分散性
•良好的高温清净
•氯气免费

应用
用于混合的API SG和更高档次的汽油发动机油
用于混合API CF-4和更高质量的柴油机油
特别适合于混合环境友好型发动机油
参考用量：2.0％-5.0％

特点

项目	规范	测试方法
密度，kg /米3 在20oC	890.0 ~ 935.0	ASTM D1298
闪点（COC），oC	≥ 180	ASTM D92
运动粘度，毫米2 /秒，在100oC	300.0 ~ 400.0	ASTM D445
氮，质量％	1.00 ~ 1.20	ASTM D3228
碱值，毫克KOH /克	15.00 ~ 30.00	ASTM D2896
企业标准Q / JTH 007-2009

注意事项
它是挤满200升金属桶。 贮存在干燥，清洁，通风的仓库。 有关健康和安全注意事项的详细信息，请参阅相关材料安全数据表。

Description
T161A is a high molecular weight ashless dispersant prepared from high reactive isobutylene (

=2300) by thermal adduction process. It has excellent dispersion & solubility effect of oil sludge and soot; and can effectively control the increase in viscosity of engine oils. T161A doesn't contain chlorine.

Special features
• Excellent low temperature dispersion of oil sludge
• Excellent soot dispersibility
• Good high temperature detergency
• Free of chlorine

Applications
Used for blending API SG and higher grade gasoline engine oils
Used for blending API CF-4 and higher quality diesel engine oils
Particularly suitable for blending environment-friendly engine oils
The dosage: 2.0-5.0%

Characteristics

Item	Specification	Test method
Density, kg/ m3, at 20oC	890.0 ~ 935.0	ASTM D1298
Flash point (COC) ,oC	≥ 180	ASTM D92
Kinematic viscosity, mm2/s, at 100oC	300.0 ~ 400.0	ASTM D445
Nitrogen, mass%	1.00 ~ 1.20	ASTM D3228
Base number, mgKOH/ g	15.00 ~ 30.00	ASTM D2896
The enterprise standard Q/ JTH 007-2009

Points for Attention
It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.