TH3152 Additive Package for Diesel Engine Oil

TH3152 Additive Package for Diesel Engine Oil

TH3152复合剂柴油机油

议价

加入意向

描述
TH3152是其被配制具有各种良好的质量的洗涤剂，分散剂，抗氧化剂/缓蚀剂和高性能无灰抗氧化剂等新一代柴油发动机油添加剂包从TH3152中制备的CD级柴油机油是更有效地减少了 碳的形成和油漆拍摄的发动机活塞，磨损，提高抗氧化性能等。

应用

API等级
治疗率（M％）
单级
多级
光盘
6.3
6.8
CC
3.0
3.5
以上剂量均按内加法计算。 这个包是适用于制备SAE 30，40，50，兑入组Ⅰ，Ⅱ组基础油10W / 30，15W / 40内燃机油。 其产品质量符合API标准。

特点

项目
典型值
测试方法
密度，kg /米3 在20oC
报告
ASTM D1298
闪点（COC），oC
170
ASTM D92
运动粘度，毫米2 /秒，在100oC
51
ASTM D445
总碱值，毫克KOH /克
110
ASTM D2896
硫酸盐灰分，质量％
15
ASTM D874
锌，质量％
0.98
ASTM D4927
磷，质量％
0.9
ASTM D1091
钙，质量％
4.2
ASTM D4927
氮，质量％
0.38
ASTM D3228
机械杂质，质量％
0.09
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-65oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH3152 is a new generation diesel engine oil additive package which is formulated with a variety of good quality detergent, dispersant, antioxidant/ corrosion inhibitor and high performance ashless antioxidants, etc. The CD grade diesel engine oil prepared from TH3152 is more effective in reducing of carbon formation and paint filming on engine piston, wear and improve the antioxidation performance, etc.

Applications

API grade
Treating rate (m%)
Mono-grade
Multi-grade
CD
6.3
6.8
CC
3.0
3.5
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/ 30, 15W/ 40 internal combustion engine oils blended with GroupⅠand GroupⅡ base oil. The quality complies with API standard.

Characteristics

Item
Typical value
Test method
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
170
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
51
ASTM D445
Total base number, mgKOH/ g
110
ASTM D2896
Sulfate ash, mass%
15
ASTM D874
Zinc, mass%
0.98
ASTM D4927
Phosphorus, mass%
0.9
ASTM D1091
Calcium, mass%
4.2
ASTM D4927
Nitrogen , mass%
0.38
ASTM D3228
Mechanical impurities, mass%
0.09
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.