TH4209 Additive Package for Universal Gear Oil

TH4209 Additive Package for Universal Gear Oil

TH4209复合剂通用齿轮油

议价

加入意向

描述
TH4209配制与各种添加剂，例如极压抗磨剂和抗氧化剂等，它可作为普遍齿轮油的倍数官能添加剂包。 它的工作原理有效防止齿面的划伤，磨损，点蚀和像下快速冲击和高扭矩条件苛刻剥落; 并保持生锈和腐蚀离开齿轮表面。

应用

性能等级
治疗率（M％）
CKC
1.1
CKD
1.5
GL-4
2.1
GL-5
4.2
以上剂量均按内加法计算。 本产品适用于SAE90的齿轮油的准备，80W / 90，85W / 90，85W / 140与混合组和第二组齿轮油。 GL-4，GL-5的质量分别符合标准Q / SH011-066-96和GB13854的要求。 混合CKC和CKD的质量符合GB 5903标准。

特点

项目
典型值
测试方法
密度，kg /米3 在20oC
报告
ASTM D1298
闪点（COC），oC
100
ASTM D92
运动粘度，毫米2 /秒，在100oC
6
ASTM D445
磷，质量％
0.9
ASTM D1091
硫，质量％
30
ASTM D129
氮，质量％
0.3
GB / T3228
机械杂质，质量％
0.1
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-65oC.
3，加热蒸汽用于传输和混合应该是65-70的温度oC.

Description
TH4209 is formulated with a variety of additives such as extreme pressure antiwear agent and antioxidant, etc. It serves as a multiple functional additive package for universal gear oils. It works effectively to prevent gear surface from scuffing, abrasion, pitting and spalling under harsh conditions like speedy impact and high torque; and keeps rust and corrosion away from the gear surface.

Applications

Performance grade
Treating rate (m%)
CKC
1.1
CKD
1.5
GL-4
2.1
GL-5
4.2
Above treating rates are calculated by addition method. This product is applicable for the preparation of the gear oils of SAE90, 80W/ 90, 85W/ 90, 85W/ 140 blended with Group I and Group II gear oils. The qualities of GL-4 and GL-5 respectively comply with the requirements of the standards Q/ SH011-066-96 and GB13854. The qualities of the blended CKC and CKD comply with GB 5903 standard.

Characteristics

Item
Typical value
Test method
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
100
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
6
ASTM D445
Phosphorus, mass%
0.9
ASTM D1091
Sulfur, mass%
30
ASTM D129
Nitrogen, mass%
0.3
GB/ T3228
Mechanical impurities, mass%
0.1
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should be 65-70oC.