T508 Phenolic Ester Antioxidant

T508 Phenolic Ester Antioxidant

T508酚酯型抗氧剂

议价

加入意向

描述
T508是酚酯化合物,其作为一个很好的抗氧化剂。 它可以减少形成沉积物在重型柴油发动机活塞的上部分,格外在第一和第二槽。

特殊功能
•优异的抗氧化作用,在高温下,减少对顶部活塞环槽积碳
•良好的油溶性(矿物油及酯类基础油)
•在与胺类抗氧剂很好的兼容; 精协同效应

应用
用于调制中,高档内燃机油。 用量:0.2-0.8%
用于混合涡轮机油,空气压缩机油,金属加工液和抗磨液压油。 参考用量:0.1〜0.15%
用于混合润滑脂。 用量:0.1-0.8%

特点

项目
规范
测试方法
密度,kg /米3 在20oC
920.0 ~ 990.0
ASTM D1298
闪点(COC),oC
≥ 170
ASTM D92
运动粘度,毫米2 /秒,在40oC
100.0 ~ 125.0
ASTM D445
企业标准Q / JTH 005-2009

注意事项
它是挤满200升金属桶。 贮存在干燥,清洁,通风的仓库。 有关健康和安全注意事项的详细信息,请参阅相关材料安全数据表。

Description
T508 is a phenolic ester compound, which acts as an excellent antioxidant. It can reduce deposit formation in the upper part of heavy duty diesel engine piston, particulary in the 1st and 2nd groove.

Special features
• Excellent antioxidation at high temperature, reduce carbon deposits on the top piston ring grooves
• Good oil solubility (mineral oil and ester base oil)
• Be well compatible with amine antioxidant; fine synergistic effect

Applications
Used for blending medium and high grade engine oils. The dosage: 0.2-0.8%
Used for blending turbine oils, air compressor oils, metal working fluids and antiwear hydraulic oils. The dosage: 0.1-0.15%
Used for blending lubricating grease. The dosage: 0.1-0.8%

Characteristics

Item
Specification
Test method
Density, kg/ m3, at 20oC
920.0 ~ 990.0
ASTM D1298
Flash point (COC) ,oC
≥ 170
ASTM D92
Kinematic viscosity, mm2/s, at 40oC
100.0 ~ 125.0
ASTM D445
The enterprise standard Q/ JTH 005-2009

Points for Attention
It is packed in 200 litre metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.