TH3056 Additive Package for Gasoline Engine Oil

TH3056 Additive Package for Gasoline Engine Oil

TH3056复合剂汽油机油

议价

加入意向

描述
TH3056配制与各种添加剂，如质量好的清洁剂，分散剂和高效无灰抗氧化剂等高性能无灰抗氧化剂，可与各种功能性添加剂很好地兼容，并具有优良的服务表现。

应用
该产品可用于混合下面的API SF级的汽油发动机油。

API等级
治疗率（M％）
单级
多级
SF
6.0
6.7
SE
5.0
5.8
SD
4.0
SC
3.0
以上剂量均按内加法计算。 这个包是适用于制备SAE30，40，50，10W / 30，兑入Gro​​upⅠandⅡbase油15W / 40内燃机油。 其产品质量符合API标准。

特点

项目
典型值
测试方法
密度，kg /米3 在20oC
报告
ASTM D1298
闪点（COC），oC
170
ASTM D92
运动粘度，毫米2 /秒，在100oC
72.6
ASTM D445
总碱值，毫克KOH /克
100
ASTM D2896
硫酸盐灰分，质量％
11
ASTM D874
锌，质量％
1.30
ASTM D4927
磷，质量％
1.1
ASTM D1091
钙，质量％
2.3
ASTM D4927
氮，质量％
0.8
ASTM D3228
镁，质量％
0.51
ASTM D4927
机械杂质，质量％
0.09
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-65oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH3056 is formulated with a variety of additives such as good quality detergent, dispersant and high performance ashless antioxidants, etc. The high performance ashless antioxidant is well compatible with various functional additives and has fine performace.

Applications
The product can be used to blend the gasoline engine oils below API SF grade.

API grade
Treating rate (m%)
Mono-grade
Multi-grade
SF
6.0
6.7
SE
5.0
5.8
SD
4.0
SC
3.0
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE30, 40, 50, 10W/ 30, 15W/ 40 internal combustion engine oils blended with GroupⅠandⅡbase oil. The quality complies with API standard.

Characteristics

Item
Typical value
Test method
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
170
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
72.6
ASTM D445
Total base number, mgKOH/ g
100
ASTM D2896
Sulfate ash, mass%
11
ASTM D874
Zinc, mass%
1.30
ASTM D4927
Phosphorus, mass%
1.1
ASTM D1091
Calcium, mass%
2.3
ASTM D4927
Nitrogen , mass%
0.8
ASTM D3228
Magnesium, mass%
0.51
ASTM D4927
Mechanical impurities, mass%
0.09
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.