TH3328 Additive Package for Two Stroke Motorcycle Oil
TH3328复合剂的二冲程摩托车油
议价
加入意向
描述
TH3328从多种添加剂制备，如质量好的分散剂和高温抗氧化剂等从TH3328中制备的油具有润滑油的性质，从而防止高温活塞环堵塞，并在燃烧室中沉积物的提前点火。 该产品还能够满足发动机的其他性能要求。
应用
添加稀释剂，聚异丁烯和倾点下降到基础油中，添加TH3328 4.0％可以混合FB级二冲程摩托车发动机油; 加入TH3328 5.5％可以混合FC级二冲程摩托车机油。 应用程序的性能和成品的质量水平是等同的两冲程摩托车油的API TC +标准。
特点
| 项目 | 典型值 | 测试方法 |
| 密度，kg /米3 在20oC | 报告 | ASTM D1298 |
| 闪点（COC），oC | 170 | ASTM D92 |
| 运动粘度，毫米2 /秒，在100oC | 78 | ASTM D445 |
| 总碱值，毫克KOH /克 | 29 | ASTM D2896 |
| 硫酸盐灰分，质量％ | 3.5 | ASTM D874 |
| 钙，质量％ | 1.07 | ASTM D4927 |
| 氮，质量％ | 0.89 | GB / T3228 |
| 机械杂质，质量％ | 0.08 | GB / T511 |
包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。
注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-75oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.
Description
TH3328 is prepared from a variety of additives such as good quality dispersant and high temperature antioxidant, etc. The oil prepared from TH3328 possesses the properties of lube, preventing high temperature piston ring clogging and the ignition of the sedimentary deposits in the firebox in advance. The product also can meet other performance requirements of the the engine.
Applications
Add diluent, polyisobutylene and the pour point depressant into the base oil, add 4.0% of TH3328 can blend FB grade two stroke motorcycle engine oil; Add 5.5% of TH3328 can blend FC grade two stroke motorcycle engine oil. The application performance and the quality level of the finished product is equivalent to those of the two stroke motorcycle oil in API TC+ standard.
Characteristics
| Item | Typical value | Test method |
| Density, kg/ m3, at 20oC | Report | ASTM D1298 |
| Flash point (COC) ,oC | 170 | ASTM D92 |
| Kinematic viscosity, mm2/s, at 100oC | 78 | ASTM D445 |
| Total base number, mgKOH/ g | 29 | ASTM D2896 |
| Sulfate ash, mass% | 3.5 | ASTM D874 |
| Calcium, mass% | 1.07 | ASTM D4927 |
| Nitrogen, mass% | 0.89 | GB/ T3228 |
| Mechanical impurities, mass% | 0.08 | GB/ T511 |
Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.
Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.
