TH3058 Additive Package for Four Stroke Motorcycle Engine Oil

TH3058 Additive Package for Four Stroke Motorcycle Engine Oil

TH3058复合剂的四冲程摩托车发动机油

议价

加入意向

描述
TH3058，制定了一套质量好的清洁剂，分散剂和高效无灰抗氧化剂。 从TH3058制备的油具有良好的高温清净性，低温度图disipersibility，优良的抗氧化和抗磨损性能。

应用
SF 15W / 40四冲程摩托车机油可以通过添加5.0％TH3058成组ⅠGroupⅡbase石油制定。 产品质量等同于硕士JASOT 903-98标准。

特点

项目
典型值
测试方法
密度，kg /米3 在20oC
报告
ASTM D1298
闪点（COC），oC
170
ASTM D92
运动粘度，毫米2 /秒，在100oC
70
ASTM D445
总碱值，毫克KOH /克
85
ASTM D2896
氮，质量％
0.7
ASTM D3228
钙，质量％
2.6
ASTM D4927
磷，质量％
0.86
ASTM D1091
锌，质量％
1.08
ASTM D4927
机械杂质，质量％
0.08
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-75oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH3058 is formulated with good quality detergent, dispersant and high performance ashless antioxidants. The oil prepared from TH3058 has favorable high temperature detergency, low-temprature disipersibility, excellent antioxidation and antiwear performance.

Applications
SF 15W/ 40 four stroke motorcycle engine oil can be formulated by adding 5.0% TH3058 into GroupⅠand GroupⅡbase oil. The product quality is equivalent to that of MA in JASOT 903-98 standard.

Characteristics

Item
Typical value
Test method
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
170
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
70
ASTM D445
Total base number, mgKOH/ g
85
ASTM D2896
Nitrogen , mass%
0.7
ASTM D3228
Calcium, mass%
2.6
ASTM D4927
Phosphorus, mass%
0.86
ASTM D1091
Zinc, mass%
1.08
ASTM D4927
Mechanical impurities, mass%
0.08
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.