TH3257 Additive Package for Universal Engine Oil

TH3257 Additive Package for Universal Engine Oil

TH3257复合剂对通用内燃机油

议价

加入意向

描述
TH3257是配制具有多种添加剂组分，例如高品位金属清净剂，无灰分散剂和高有效无灰抗氧化剂等从TH3257中制备的润滑油的通用发动机油添加剂包具有良好的清净性，分散性和优良的抗氧化性能。

应用

API等级
治疗率（M％）
单级
多级
CD / CF
5.4
5.9
CC / SC
2.7
3.0
以上剂量均按内加法计算。 这个包是适用于制备SAE 30，40，50，10W / 30，兑入组Ⅰ，Ⅱ组基础油15W / 40内燃机油，其产品质量符合API标准。

特点

项目
典型值
测试方法
Appearence
棕红色粘稠液体
视力检查
密度，kg /米3 在20oC
报告
ASTM D1298
闪点（COC），oC
170
ASTM D92
运动粘度，毫米2 /秒，在100oC
41
ASTM D445
总碱值，毫克KOH /克
183
ASTM D2896
锌，质量％
1.82
ASTM D4927
磷，质量％
1.5
ASTM D1091
钙，质量％
6.45
ASTM D4927
机械杂质，质量％
0.1
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-65oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
TH3257 is a universal engine oil additive package formulated with a variety of additive components such as high grade metallic detergent, ashless dispersant and high effective ashless antioxidant, etc. The lube oil prepared from TH3257 has favorable detergency, dispersibility and fine antioxidation performance.

Applications

API grade
Treating rate (m%)
Mono-grade
Multi-grade
CD/ CF
5.4
5.9
CC/ SC
2.7
3.0
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/ 30, 15W/ 40 internal combustion engine oils blended with GroupⅠand Group Ⅱ base oil, and the quality complies with API standard.

Characteristics

Item
Typical value
Test method
Appearence
Brownish red sticky liquid
Visual inspection
Density, kg/ m3, at 20oC
Report
ASTM D1298
Flash point (COC) ,oC
170
ASTM D92
Kinematic viscosity, mm2/s, at 100oC
41
ASTM D445
Total base number, mgKOH/ g
183
ASTM D2896
Zinc, mass%
1.82
ASTM D4927
Phosphorus, mass%
1.5
ASTM D1091
Calcium, mass%
6.45
ASTM D4927
Mechanical impurities, mass%
0.1
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.