描述
此产品被配制与各种添加剂，如高度有效的抗氧化剂，增白剂和冷却促进剂的。 良好的油溶性和优异的抗氧化作用可保持光泽度为机械部件。

应用
用于混合冷淬火油，marquenching和真空淬火油; 处理剂量依赖于油浴温度下，典型2.0-3.0％。 该混纺产品是按照普通淬火介质的规格按JB / T6955-93规定的热处理或SH0564-93标准。

特点

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50^o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-75^oC.
3，加热蒸汽用于传输和混合不应超过110的温度^oC.

Description
This product is formulated with a variety of additives, such as highly effective antioxidant, brightening agent and cooling accelerant. Good oil solubility and excellent antioxidation can keep the glossiness for the mechanical components.

Applications
Used for blending cold quenching oil, marquenching and vacuum quenching oils; the treating dose depends on the oil bath temperatures, typically 2.0-3.0%. The blended products are in accordance with the specifications of common quenching media for heat treatment specified by JB/ T6955-93 or the standard of SH0564-93.

Characteristics

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50^oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75^oC.
3, The temperature of heating steam for transferring and blending should not exceed 110^oC.