TH5036复合剂的高温链条油

议价
加入意向
描述
TH5036配制与各种添加剂,如质量好的抗氧化剂和抗磨剂。 从TH5036制备的油具有良好的高温抗氧化,防腐,防锈功效。 它用于友好,并且没有不良气味。
应用
使用低于300高温链条油各种粘度等级o C,可通过添加1.0-1.4%TH5036和充分混合,在60来制备oC-75o 下用矿物油,半合成的油,polyaether,聚α-烯烃和酯型油。
特点
| 项目 | 典型值 | 测试方法 |
| 密度,kg /米3 在20oC | 报告 | ASTM D1298 |
| 闪点(COC),oC | 166 | ASTM D92 |
| 运动粘度,毫米2 /秒,在100oC | 6.8 | ASTM D445 |
| 氮,质量% | 0.21 | ASTM D3228 |
| 机械杂质,质量% | 0.08 | GB / T511 |
包装,运输,贮存
1,该软件包是装在200升铁桶。 避免与强氧化剂接触。
2,储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3,包装,标志,运输,贮存及交货验收应符合SH / T0164的要求。
注意事项
1,包装是一种功能性添加剂包,用消泡剂添加应用的。
2,建议的温度为油调合60-75oC.
3,加热蒸汽用于传输和混合不应超过110的温度oC.
Description
TH5036 is formulated with a variety of additives such as good quality antioxidant and antiwear agents. The oil prepared from TH5036 has favorable high temperature antioxidation, anticorrosion and antirust efficacies. It is used friendly and there is no bad smell.
Applications
The high temperature chain oils with various viscosity grades used below 300oC, can be prepared by adding 1.0-1.4% TH5036 and well mixing at 60oC-75oC with mineral oil, semisynthetic oil, polyaether, poly alpha olefin and ester-type oils.
Characteristics
| Item | Typical value | Test method |
| Density, kg/ m3, at 20oC | Report | ASTM D1298 |
| Flash point (COC) ,oC | 166 | ASTM D92 |
| Kinematic viscosity, mm2/s, at 100oC | 6.8 | ASTM D445 |
| Nitrogen, mass% | 0.21 | ASTM D3228 |
| Mechanical impurities, mass% | 0.08 | GB/ T511 |
Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.
Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.