TH3256 Additive Package For Universal Engine Oil

TH3256 Additive Package For Universal Engine Oil

TH3256复合剂对于通用内燃机油

议价

加入意向

描述
包被显影以制定上品万向发动机油，其包含与各种添加剂，如清洁分散剂，抗氧化剂/缓蚀剂，无灰抗氧化剂和抗磨剂，等从TH3256制备的通用的发动机油可有效地减少碳的 形成和油漆成膜发动机活塞。 它具有良好的性能在抗氧化，抗腐蚀和抗磨损。

应用

API等级
治疗率（M％）
单级
多级
CC / SE
3.6
4.0
CD / SF
4.5
5.0
CF / SG
6.3
7.0
CF / SH
7.7
8.5
以上剂量均按内加法计算。 这个包是适用于制备SAE 30，40，50，为10W / 30，15W / 40，20W / 50内燃机油兑入组ⅠGroupⅡbase油，其产品质量符合API标准。

特点

项目
典型值
测试方法
密度（20o C），千克/米3
报告
ASTM D1298
闪点（COC），oC
170
ASTM D92
运动粘度（100o C），毫米2/s
90
ASTM D445
总碱值，毫克KOH /克
120
ASTM D2896
氮，质量％
0.6
ASTM D3228
锌，质量％
1.2
ASTM D4927
磷，质量％
0.85
ASTM D1091
钙，质量％
4.1
ASTM D4927
机械杂质，质量％
0.08
GB / T511

包装，运输，贮存
1，该软件包是装在200升铁桶。 避免与强氧化剂接触。
2，储存温度应不超过50o C.进入的水和杂质是严格禁止的。
3，包装，标志，运输，贮存及交货验收应符合SH / T0164的要求。

注意事项
1，包装是一种功能性添加剂包，用消泡剂添加应用的。
2，建议的温度为油调合60-75oC.
3，加热蒸汽用于传输和混合不应超过110的温度oC.

Description
The package is developed to formulate top grade universal engine oils, which contains with a variety of additives such as detergent dispersant, antioxidant/ corrosion inhibitor, ashless antioxidant and antiwear agent, etc. The universal engine oil prepared from TH3256 is effective in reducing of carbon formation and paint filming on engine piston. It has favorable performance in antioxidation, anticorrosion and antiwear.

Applications

API grade
Treating rate (m%)
Mono-grade
Multi-grade
CC/ SE
3.6
4.0
CD/ SF
4.5
5.0
CF/ SG
6.3
7.0
CF/ SH
7.7
8.5
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/ 30, 15W/ 40 and 20w/ 50 internal combustion engine oils blended with GroupⅠand GroupⅡbase oil, and the quality complies with API standard.

Characteristics

Item
Typical value
Test method
Density (20oC) , kg/ m3
Report
ASTM D1298
Flash point (COC) ,oC
170
ASTM D92
Kinematic viscosity (100oC) , mm2/s
90
ASTM D445
Total base number, mgKOH/ g
120
ASTM D2896
Nitrogen , mass%
0.6
ASTM D3228
Zinc, mass%
1.2
ASTM D4927
Phosphorus, mass%
0.85
ASTM D1091
Calcium, mass%
4.1
ASTM D4927
Mechanical impurities, mass%
0.08
GB/ T511

Packing, Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/ T0164.

Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-75oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.