规范：
•部件号：HL-PL / S111D
•说明：专利的11W LED PL-C管
•基本尺寸：41（D）x145mm
•材料：铝体，透明或磨砂防紫外线PC盖，条或格子形状。
•基座：G24D / G24Q / GX23-2 / G23-2 / E26 / E27 / B22 / E14基座
•光源：Epistar 0.2W 2835 SMD LED x 70pcs
•输入电压：85-265V AC（PF≥0.5），85-300V AC（PF≥0.9），50 / 60Hz，隔离驱动器，非调光
•功率：11W
•输出通量：1000-1150lm，100lm / W
•视角：360度。
•CCT：2700K-7000K可用
•cri（ra）：> 80
•更换：PLC-26W节能灯
•设计用于更换筒灯，嵌入式罐，烛台和天花板固定装置中的CFL。
•其他：5W，7W，9W，11W可用
•包装：彩盒

特征：
•类似尺寸和更高的流明至PL-L CFL，易于更换
•铝制外壳，散热良好
•过压和过热保护，0-100％可调光。
•高通量效率，高PF和Ra
•即时开启，无噪音，无闪光，无紫外线和红外线
•开关周期：≥15000
•流明维持在6000小时：≥90％
•工作温度范围：-25°C - 45°C
•使用寿命长达50,000小时以上
•三年有限保修
•符合CE，RoHS标准

警告：
•不能在全封闭灯具中使用
•干燥位置
•不要混淆12V，120V，230V，277V输入电压。
•电子镇流器必须旁路。
其他：
•请贴上标签“该灯具的未来重新灯泡需要使用自镇流LED灯。镇流器已经在灯具上的这个夹具旁路。

Specification:
• Part number: HL-PL/S111D
• Description: Patented 11W LED PL-C tubes
• Basic size: 41(D)x145mm
• Materials: aluminum body, clear or frosted anti-UV PC cover, strip or plaid shape.
• Base: G24D/G24Q/GX23-2/G23-2/E26/E27/B22/E14 base available
• Light source: Epistar 0.2W 2835 SMD LED x 70pcs
• Input voltage: 85-265V AC (PF≥0.5), 85-300V AC (PF≥0.9), 50/60Hz, isolated driver, non dimmable
• Wattage: 11W
• Output flux: 1000-1150lm, 100lm/W
• Viewing angle: 360deg.
• CCT: 2700K-7000K available
• CRI (Ra): ﹥80
• Replace: PLC-26W energy saving lamp
• Designed to replace CFL in down lights, recessed cans, sconces and ceiling fixtures.
• Others: 5W, 7W, 9W, 11W available
• Package: color box

Features:
• Similar size and higher lumens to PL-L CFL, easy to replace
• Aluminum housing with good heat dissipation
• Overvoltage and overheating protection, 0-100% dimmable.
• High flux efficacy, high PF and Ra
• Instant on, no noise, no flash, no UV and IR
• Switching cycles: ≥15000
• Lumens maintenance at 6000Hrs: ≥90%
• Operating temperature range: -25°C - 45°C
• Long lifespan up to more than 50,000 hours
• Three years limited warranty
• Comply with CE, RoHS standards

Caution:
• Can't be used in fully enclosed luminaires
• Dry location only
• Don't confuse 12V, 120V, 230V, 277V input voltage.
• Electronic ballast must be bypassed.
Others:
• Please put label 'future re-lamping of this luminaire requires the use of a self-ballasted LED lamp. The ballast has been bypassed in this fixture' on fixtures.