至于传统的电信业务迁移到该IP包网络技术具有成本效益的解决方案中，16个E1通过以太网（E1通过IP）采用创新的TDM over IP技术，具有IP电路仿真支持交通16 E1和3ethernet 端口。 上行链路端口和用户数据的端口都符合IEEE 802.3标准，10 / 100M自动感应以太网端口。

国家的最先进的设计提供了。 高精度时钟恢复 （可以达到 16ppb ）。 基于IP的设备支持16E1 成帧和非成帧E1通道 根据不同的应用的要求，即预定义的系统参数型材; 最终简化安装过程，节省了维护成本。

将16E1基于IP的TDM也适合用于连接到无线设备实现快速部署的E1 / T1业务。 一个特定的应用是构建低成本无线局域网网桥E1 / T1链路，更换更昂贵的微波无线电。 运营商可以使用Baudcom基于IP的TDM设备通过有线或无线以太网/ IP网络提供传统的TDM服务。 支持所有的传统E1和IP服务，如语音，数据，传真，信令和其它各种通信服务的。

1.提供3个FE电口

支持，方便安装和维护2.用户友好的Web服务器，报警日志提供

3.能够支持框架E1（NX 64K），或成帧E1

4. Suppport E1或T1标准

要多支持5点对点和点

6.高精度时钟恢复（二准确性版本：100ppb，16ppb），低抖动和漂移

7.最高时钟恢复的版本（16ppb）可用于BTS /节点B回程应用

8.低处理延迟的E1通道，高带宽的使用效率

9.抗丢包，与PCM帧同步保护

10.支持以太网封装和UDP / IP协议封装。

11.足够的抖动缓冲抵抗包延迟变化（PDV）

12.本地以太网端口吞吐量限制，保证E1服务质量

13.120|¸平衡E1 / T1端口，RJ-45接口，支持75|¸不平衡端口之外，通过转换线缆。

14.软件和硬件的在线升级

15.电源冗余

在无线网络的典型应用

相关链接：
转以太网转换器TDM之间的区别在IP和E1是什么？

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, the 16 E1 over Ethernet (E1 over IP) adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation 16 E1 and 3ethernet port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100M auto-sensed Ethernet ports.

State-of-the-art design provides the. high accurate clock recovery (can reach 16ppb) . The 16E1 over IP device supports framed and unframed E1 channel Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.

The 16E1 TDM over IP is also suitable for connecting to the wireless equipment to achieve fast deployment of E1/ T1 services. One particular application is to build E1/ T1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use Baudcom TDM over IP devices to provide legacy TDM services over wired or wireless Ethernet/ IP network. support all of the traditional E1 and IP services, such as voice, data, fax, signaling and the other all kinds of communication service.

1. Provide 3 FE electrical ports

2. User-friendly Web server supported for easy setup and maintenance, alarm log provided

3. Can support as framed E1 (N X 64K) , or unframed E1

4. Suppport E1 or T1 standard

5. Point to point and point to multipoint supported

6. high accurate clock recovery (Two accuracy version: 100ppb, 16ppb) , low jitter and wander

7. highest clock recovery version (16ppb) could be used for BTS/ NodeB backhaul application

8. Low processing delay for E1 channels, high bandwidth usage efficiency

9. Resist to packet loss, with PCM frame synchronization protection

10. Support Ethernet encapsulation and UDP/ IP protocol encapsulation.

11. Enough jitter buffer to resist packet delay variation (PDV)

12. Local Ethernet port throughput limiting, assuring E1 QoS

13. 120¦¸ balanced E1/ T1 port, RJ-45 connector, support 75¦¸ unbalanced port through outside converting cable.

14. Software and hardware online upgrade

15. Power supply redundancy

Typical Application in Wireless Network

Related Link:
What is the difference between TDM over IP and E1 to Ethernet converter ?