single port G.703 Balun with plastic case
单端口G.703巴伦塑料外壳
议价
加入意向描述：
单端口G. 703 E1不平衡变压器解决UTP和同轴电缆之间的不匹配。 将E1不平衡转换器可以用于内部网络连接的T1 / E1 / CPE网络传输设备和其他应用程序。
支撑E1数据率2.048 Mbps时， BIC -C1接收75欧姆信号，并且将它们转换为120欧姆对通过网络传输或接收由CPE 。 输出通过BD- IC1信号被缩放，以匹配由CCITT的G. 703标准中规定的脉冲形状的要求。 在BIC - C1可以执行120欧姆到75欧姆信号转换以及，给该设备具有双重作用。
产品特点：
- 数据速率为2.048 Mbps的
- 75欧姆同轴电缆双到120欧姆双绞线
- 双向信号转换
- 没有交流电源或电池所需
- 可用男性或女性同轴电缆BNC连接器
- 超小型机箱
应用：
Description:
The single port G. 703 E1 balun solve the mismatch between UTP and coaxial cable. The E1 baluns can be used for internal network connectivity T1/ E1/ CPE network transmission equipment and other applications.
Supporting E1 data rates to 2.048 Mbps, the BIC-C1 receives 75 ohm signals and converts them to 120 ohm for transmission over a network or reception by a CPE. The signals output by the BD-IC1 are scaled to match the pulse shape requirements specified by the CCITT G. 703 standard. The BIC-C1 can perform 120 ohm to 75 ohm signal conversion as well, giving the device a dual role.
Features:
- Data Rates to 2.048 Mbps
- 75 Ohm Dual Coax to 120 Ohm Twisted Pair
- Bi-Directional Signal Conversion
- No AC Power or Batteries Needed
- Male or Female Coax BNC Connectors Available
- Ultra-Miniature Enclosure
Application:
