BD-16E1-4ETH-CON是16E1 4以太网 收敛 协议转换器，它是多E1集聚类型桥通信设备公司。 该装置可被用作16E1到4FE 接入网关. 收敛converter¡¡$ s的带宽可以根据user¡¡$ s的要求分为1〜16路. 一个或多E1线路是分成透明携带以太网数据一个通道。 本机支持16路E1和4ethernet复用，实现E1和GFP以太网之间的互联。 背部LCAS，LAPS和任何16E1结合传输，配备与ITU-T G. 813网元定时，VC-12的交叉连接和通道的保护功能。

该集聚转换器可以支持 点多点应用 （一个16E1转换器可以与8E1工作转以太网转换器，4E1​​以太网转换器和E1转以太网转换器）。 该装置还可以用作点对点应用中，两个16E1转换器一起工作。

该设备支持SNMP管理。 由网络管理，用户可以结合任何E1线路并分成1〜16路。 该收敛转换器是基于统一的网络管理平台和设计根据ITU-T标准，实现网络资源，设备配置，告警和性能管理。

特征

• 提供16路E1服务interfaces¡ê»的16E1线可以划分为不同的信道。
• 支持ITU-T G. 813网元时间，并自动实现薮计时资源之间的转移;
• 提供一对时钟接口，并可以根据您的需要输入2M时钟信号;
• 大多数的4通道10 / 100BASE-TX接口，支持GFP / LAPS封装;
  
• 支持点对点多点的应用程序和点到点指向应用程序;
• 支持2个管理modes¡êoSNMP网络management¡¡éCONSOLE当地terminal¡ê»
• 双电源模块，-48V DC或220V交流。
  

E1接口 率 2.048Mb /s¡¨¤50ppm 编码 HDB3 标准 ITU-T G. 703 连接器 RJ45¡ê¡§120| ¸¡ê©¡ê¬BNC¡ê¡§75| ¸¡ê© 阻抗 75 | ¸/非平衡，120 | 均衡 抖动 符合ITU-T G. 823 SNMP网络管理：

电源 工作电压范围宽，良好的 防干扰和隔离，工作稳定 选择我¡照着直流-48V，范围DC-36V〜DC-72C 选项​​二¡照着AC220V，AC165V范围〜AC240V 功耗：（= 5瓦 尺寸 1U /19¡¡à：483¡ê¡§W¡ê©x140¡ê¡§L¡ê©x44¡ê¡§H¡ê©毫米

环境条件 工作温度：-10℃〜+ 50℃ 储存温度：-40℃〜+ 70℃ 相对温度：95％（未冷凝）

应用：
应用1：点对多点申请; 与8E14E1 16E1转换器工作; E1转换器

BD-16E1-4ETH-CON is 16E1 to 4 ethernet convergence protocol converter, which is multi-E1 convergency type bridge communication equipement. The device can be used as 16E1 to 4FE access gateway.The convergence converter¡¡$s bandwidth can be divided into 1~16channels according to user¡¡$s requirement. One or multi-E1 lines are divided into one channel which carries the Ethernet data transparently. This device supports 16 channels E1 and 4ethernet multiplexing, realizing the interconnection between E1 and GFP Ethernet. Back LCAS, LAPS, and any 16E1 binding transmission, equipped with ITU-T G. 813 NE timing, VC-12 cross connection and channel protection functions.

The convergency converter can support point to multi-point application (one 16E1 converter can work with 8E1 to Ethernet converter, 4E1 to Ethernet converter and E1 to Ethernet converter) . The device also can be used as point to point application, two 16E1 converter work together.

The device support SNMP management. By the network management, the user can bind any E1 lines and divide them into 1~16channels. The convergency converter is based on unifying network management platform and designed according to ITU-T standard, achieving network resource, device configuration, alarm and performance management.

Features

• Offer 16 channels E1 service interfaces¡ê»the 16E1 lines can be divided into different channels.
• Support ITU-T G. 813 net element timing, and automatically realize the shift between serval timing resources;
• Offer a pair of clock interfaces, and can input 2M clock signal according to your needs;
• Most 4 channels 10/100Base-Tx interfaces, support GFP/ LAPS encapsulation;
  
• Support point to multi-point application and point to point to point application;
• Support 2 management modes¡êoSNMP network management¡¡éCONSOLE local terminal¡ê»
• Dual power modules, -48V DC or 220V AC.
  

E1 Interface Rate 2.048Mb/ s¡¨¤50ppm Coding HDB3 Standard ITU-T G. 703 Connector RJ45¡ê¡§120| ¸¡ê©¡ê¬BNC¡ê¡§75| ¸¡ê© Impedance 75| ¸/ unbalanced, 120| ¸/ balanced Jitter Compliant with ITU-T G. 823 SNMP Network Management:

Power supply working voltage range wide, good anti-disturb and Isolation, work stable option I ¡§C DC-48V, range DC-36V~DC-72C option II ¡§C AC220V, range AC165V~AC240V Power Consumption: (=5 Watts Dimension 1U/ 19¡¡à: 483¡ê¡§W¡ê©x 140¡ê¡§L¡ê©x44¡ê¡§H¡ê©mm

environment condition Operating temperature: -10C~+50 C Storage temperature: -40 C~+70 C Relative temperature: 95% (uncondensed)

Application:
Application 1: Point to multipoint application; 16E1 converter work with 8E14E1; E1 converter