16E1 over Ethernet Multiplexer | 16E1 over IP
16E1以太网多路复用器| 16E1通过IP
议价
加入意向产品概述：
至于传统的电信业务迁移到该IP包网络技术具有成本效益的解决方案中，16个E1通过以太网（E1通过IP）采用创新的TDM over IP技术，具有IP电路仿真支持的运输 8〜16个E1 和 5 GE电口 和 1 GE光口 。 上行链路端口和用户数据的端口都符合IEEE 802.3标准，10/100 / 1000M自动感应以太网端口。
的最先进的国家设计提供了最高的可用性与准确的定时信号和数据比特流重建。 根据不同的应用的要求，即预定义的系统参数型材; 最终简化安装过程，节省了维护成本。
16个E1以太网（BD-16E1-IP）可以在Baudcom TDM其他成员的IP系列，如8路E1以太网（BD-8E1-IP），4个E1以太网协同工作（BD-4E1-IP） ，2个E1以太网（BD-2E1-IP），单E1以太网（BD-E1-IP）等来运行旧的E1业务。 电信和企业用户可以节省大量的接入和设备成本，并在他们的分组交换基础设施，提供不同类型的服务产生新的收入。 它也适合于连接到无线设备实现快速部署的E1 / T1业务。 一个特定的应用是构建低成本无线局域网网桥E1 / T1链路，更换更昂贵的微波无线电。 运营商可以使用Baudcom基于IP的TDM设备通过有线或无线以太网/ IP网络提供传统的TDM服务。
特征
1.提供5千兆电口和1个GE光口; 6 GE端口作为网络上行链路或用户端口; 5 GE电口任何人都可以充当网管口
2.支持以太网生成树协议，使正常的工作和保护环和网状拓扑结构，在很短的时间保护个人简历
支持，方便安装和维护3.用户友好的Web服务器，报警日志提供
4.支持SNMP V1 / V2网络管理
5.以太网内置2层交换机，支持VLAN，符合IEEE 802.3X，802.1P
6，提供2个可插拔E1卡，每张卡支持8个E1 / T1
要多支持7点对点和点
8.稳定的E1时钟恢复，低抖动和漂移
9.低处理延迟的E1通道，高带宽的使用效率
10.抗丢包，与PCM帧同步保护
1.用户可自定义的封装数据包大小为不同的应用
2.支持以太网封装和UDP / IP协议封装。
3.支持VLAN设置E1业务和带内管理VLAN。
4.足够的抖动缓冲抵抗包延迟变化（PDV）
5.本地以太网端口吞吐量限制，保证E1服务质量
6.120Ω平衡E1 / T1端口，RJ-45接口，支持75Ω不平衡端口之外，通过转换线缆。
7.支持级联连击超过16个E1端口
8.软件和硬件的在线升级
9.电源冗余
用220V交流输入和55V直流输出电源模块支持10 POE供电。
技术规格
| 项目 | 描述 | |
| 模型 | BD-16E1-IP | 5 GE电口和1个GE光口，16个E1 |
| 接口 | IP端口 | 5 GE电口和1个GE光口 符合IEEE 802.3，802.1Q，802.1P 速度和双工模式自动协商或手动 |
| E1端口 | 16个E1端口支持 符合G. 703 阻抗：E1-120Ω或75Ω | |
| NM端口 | 同IP端口 | Web服务器和SNMP管理支持 |
| 功率 | 供应 | 可插拔双电源供电 |
| 2DC或2AC或DC + AC | ||
| -48V〜-72VDC或100〜240VAC | ||
| 消费 | ≤15W | |
| 工作环境 | 温度 | 0~ 50°C |
| 相对湿度 | ≤90％（无冷凝） | |
| 尺寸 | 宽x高x深（mm）： | 440 x 44 x 231 |
ypical应用
在无线网络的典型应用
相关链接：
转以太网转换器TDM之间的区别在IP和E1是什么？
Product Overview:
As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, the 16 E1 over Ethernet (E1 over IP) adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 8~16 E1s and 5 GE electrical ports and 1 GE optical port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.
State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
The 16 E1 over Ethernet ( BD-16E1-IP) could work together with other members in Baudcom TDM over IP family such as the 8 E1 over Ethernet (BD-8E1-IP) , 4 E1 over Ethernet (BD-4E1-IP) ,2 E1 over Ethernet (BD-2E1-IP) , single E1 over Ethernet (BD-E1-IP) etc. to run legacy E1 services. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of services over their packet-switched infrastructure. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1/ T1 services. One particular application is to build E1/ T1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use Baudcom TDM over IP devices to provide legacy TDM services over wired or wireless Ethernet/ IP network.
Features
1. Provide 5 GE electrical ports and 1 GE optical port; 6 GE ports serve as network uplinks or users ports; Anyone of 5 GE electrical ports may act as NM port
2. Support Ethernet spanning tree protocol which enable normal work and protection in ring and mesh topology, protection resume in short time
3. User-friendly Web server supported for easy setup and maintenance, alarm log provided
4. Support SNMP V1/ V2 network management
5. Ethernet built-in layer 2 switch, support VLAN, comply with IEEE 802.3x, 802.1P
6. Provide two pluggable E1 cards, each card supports 8 E1/ T1s
7. Point to point and point to multipoint supported
8. Stable E1 clock recovery, low jitter and wander
9. Low processing delay for E1 channels, high bandwidth usage efficiency
10. Resist to packet loss, with PCM frame synchronization protection
1. User definable encapsulation packet size for different application
2. Support Ethernet encapsulation and UDP/ IP protocol encapsulation.
3. Support VLAN settings for E1 service and in band VLAN management.
4. Enough jitter buffer to resist packet delay variation (PDV)
5. Local Ethernet port throughput limiting, assuring E1 QoS
6. 120Ω balanced E1/ T1 port, RJ-45 connector, support 75Ω unbalanced port through outside converting cable.
7. Support cascade concatenate for more than 16 E1 ports
8. Software and hardware online upgrade
9. Power supply redundancy
10. POE power supply supported by power module with 220V AC input and 55V DC output.
Technical Specifications
| Item | Description | |
| Model | BD-16E1-IP | 5 GE electrical ports and 1 GE optical port, 16 E1s |
| Interfaces | IP ports | 5 GE electrical ports and 1 GE optical port Comply with IEEE 802.3, 802.1Q, 802.1P Speed and duplex auto-negotiation or manual |
| E1 Ports | 16 E1 Ports Supported Comply with G. 703 Impedance: E1-120Ω or 75Ω | |
| NM port | Same as IP ports | Web server and SNMP management supported |
| Power | Supply | Pluggable dual power supply |
| 2DC or 2AC or DC+AC | ||
| -48V~-72VDC or 100~240VAC | ||
| Consumption | ≤15W | |
| Working Environment | Temperature | 0~ 50°C |
| Relative Humidity | ≤90% (non-condensing) | |
| Dimension | W x H x D (mm) : | 440 x 44 x 231 |
ypical Application
Typical Application in Wireless Network
Related Link:
What is the difference between TDM over IP and E1 to Ethernet converter ?
